Instruction/ maintenance manual of the product ENHGS-800 Encore electronic
Go to page of 6
ENHGS-800 GIGABIT 8-PORT ETHERNET SWITCH User Guide 0.
FCC Certifications This Equipment has been tested and found to comply w ith the limits for a Class B digital device, pursuant to part 15 of the FCC R ules. T hese limits are desig ned to provide reas onable protection against harmful interference wh en the equipm ent is operated i n a commercial environment.
The device is a pow erful, high-perf ormance Gigabit Et hernet switch, with all ports cap able of 10, 100 or 1000Mbps auto- negotiation operation (NW ay), which means the switch could automatically negotiate with t he connected part ners on the networ k speed and duplex mode.
Please refer to t he following table for LED definitio n 5-Port 8-Port LED Status Operation Steady Green Power is on Power Off Power is off Steady Green Connected as 100 0Mbps 1000M Blinking Green The port is transm itting/receiving da ta. Steady Green Connected as 100M bps 100M Blinking Green The port is transm itting/receiving da ta.
Connect each stati on to the switch by tw isted-pair cable. Plug one RJ-45 connector i nto a RJ-45 port of the switch, and plu g the other RJ-45 connector i nto the station’s network adapter . Po wer on the switch and then system is ready . For cable selection, r efer to the fol lowing table.
Standard IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3x full duplex operation and flow control Interface 5/ 8* 10/100/1000Mbps RJ-45 Gigabit Ethernet Ports Uplink Auto MDI/MDI-X （ Auto crossover ） Network Speed 10/100/1000Mbps & Full/Half duplex mode auto detection (1000Mbps for Full duplex only) MAC Addr .
An important point after buying a device Encore electronic ENHGS-800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Encore electronic ENHGS-800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Encore electronic ENHGS-800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Encore electronic ENHGS-800 you will learn all the available features of the product, as well as information on its operation. The information that you get Encore electronic ENHGS-800 will certainly help you make a decision on the purchase.
If you already are a holder of Encore electronic ENHGS-800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Encore electronic ENHGS-800.
However, one of the most important roles played by the user manual is to help in solving problems with Encore electronic ENHGS-800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Encore electronic ENHGS-800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
