Instruction/ maintenance manual of the product 802.11G/B Encore electronic
Go to page of 12
802.1 1g/b Wireless Print Server with 2-USB2.0 and 1-Parallel Port Quick Inst allation Guide V1.2 1.
Before you st art, you should prep are the following items: z Windows-based computer with print server setup CD z Printer z Printer cable z One 802.1 1b/g Access Point (optional) Wired Network with Pr.
Ad-Hoc mode (Peer to Peer): Printer Print Server Laptop Laptop Hardware Inst allation: 1. T urn off the printer ’s power . 2. Connect the print server to your pr inter with the supplied printer cable. 3. T urn the printer ’s power on. 4. Plug the AC power adapter into t he power connector on the print server .
4. Click Next , the wizard will automatically discover the print server . 5. From the Select A Print Server screen, select the print server port that you want to 4.
configure and click Next . Note: PA R A L L E L Rear Panel USB 1 USB2 LAN PA R A L L E L is Port 1(PID1) USB1 is Port 2(PID2) USB2 is Port 3(PID3) 5.
6. On the Change Settings screen, select No or Ye s : Click No if you want the print se rver to keep using the def ault IP address and keep the default Infrastructure settings: z Infrastructure mode z SSID: <ANY> z Encryption: none z DHCP client: Of f z IP address: 192.
z Enter the proper SSID of your wireless network. - Channel : optional - Dat a T ransmit Rates : select Auto or others - T r ansmit Mode : select Auto or others z On the Wireless Security screen, enable or disable WEP/WP A encryption, configure according to your wireless network and click Next .
8. Click Add New Printer to launch Windows Add Printer Wizard . 9. Click Next and select Local Printer , make sure the Automatically detect and inst all my Plug and Play printer check box is NOT checked.
10. Make sure the Use the following port radio-button is clicked and selec t LPT1: (Recommended Printer Port) from the pull-down list. Then click Next .
12. If you already have the printer ’s driver in st alled, you will be asked whether to keep it or to replace it. Click Next . Supply a name for the printer and choose whether you want to make it your default printer .
15. From Windows system, go to st art -> Printers and Faxes and highlight your newly installed printer . 16. Right-click, select Properties -> Port s and verify that the print server ’ s port appears.
17. Go to General ; click Print T est Page to verify the configuration. 18. Done. Note: If you wish to install more print servers, st art setup wizard from your Windows S tart menu: st art -> All Programs -> Network Print Server -> PSWzard and repeat the installation procedure.
An important point after buying a device Encore electronic 802.11G/B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Encore electronic 802.11G/B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Encore electronic 802.11G/B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Encore electronic 802.11G/B you will learn all the available features of the product, as well as information on its operation. The information that you get Encore electronic 802.11G/B will certainly help you make a decision on the purchase.
If you already are a holder of Encore electronic 802.11G/B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Encore electronic 802.11G/B.
However, one of the most important roles played by the user manual is to help in solving problems with Encore electronic 802.11G/B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Encore electronic 802.11G/B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
