Instruction/ maintenance manual of the product LM2203 Emprex
Go to page of 14
21.6 " wide L CD Monitor User Manual English Deutsch Français Italiano Español ㅔԧЁ᭛ 3FFɤɢɣ Svenska Suomi Dansk Polski Nederlands ! ý fujob.
PRECAUTIONS Information for users applicable in European Union countries 1 Information for users applicable in United States of America 1 Installation 1 Power connection 1 Maintenance 1 Transporting t.
Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
- 1 - PRECAUTIONS T ransporting the monitor 1.When carrying the display to repair or check it, please press the "round button" behind the support, remove the base, and then use the original carton and packing materials to wrap the display and its accessories.
- 2 - GETTING ST ARTED 1.Setting up the monitor 1.1 T ake out the monitor and monitor base from the package. 1.2 Place the detached monitor base on the desk. 1.3 Grasp the monitor with both hands and securely attach the monitor by sliding the monitor neck into the base (Ensure the direction of the base is correct) 2.
- 3 - Identifying parts and controls 1.The LED light indicates the state of working. During operation, the LED Light is bright green. When dormant, the LED Light is orange. 2.The power button is used to identify the state of power. You can use the power button to control on & off.
- 4 - Hotkeys Introduction 1.Auto Adjustment When the OSD functions are displayed, press the first button on the left , and then you can automatically optimize the image performance. 2.V olumn Control (Audio matching) When the OSD functions are displayed, press the first button on the right to enter the “AUTO ADJUSTMENT” menu.
- 5 - OSD Icon List AUTO ADJUSTMENT POWER SA VING MODE INPUT SIGNAL SELECT BRIGHTNESS * Optimize the picture performance automatically . * Select between Standard and Advanced power saving modes.
- 6 - * Show the frequency, resolution, input interface and other operating details about this display. INFORMATION DEMO RECALL * Reset monitor parameters back to factory preset values. * 2 seconds after activation of this function, some of the menus will stimulate feature-grading effects 2 times over.
- 7 - Troubleshooting 1. Check if the monitor is turned on (press the button again). 2. Check if the power cord is properly connected to the monitor and power outlet. 3 .Check if there is electricity coming from the power outlet (use another device to check for power).
1. The following frequency range is the working period. If the entered mode between below period but not match the frequency of supported timing, display optimization would not be assured. If the entered mode is out of the working period, the display will be blanking (just show “INPUT SIGNAL OUT OF RANGE”) then go to power saving.
1.Background The traditional monitors have the function of electricity-saving dormancy . But the interval of dormancy is difficult to decide. If the interval is long, the purpose of saving electricity can not be achieved. While the interval is short, your computer and LCD monitor would be dormant often.
4.The side effect of the Monitor Life-Extension function (why not preset Advanced Power Saving Mode as default?) According to the request of EP A (U S Environmental Protection Agency) to power management of monitors, the power consumption of the monitor must go down to below 3 watts within 3 seconds after the monitor steps in power saving mode.
- 1 1 - 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
An important point after buying a device Emprex LM2203 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emprex LM2203 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emprex LM2203 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emprex LM2203 you will learn all the available features of the product, as well as information on its operation. The information that you get Emprex LM2203 will certainly help you make a decision on the purchase.
If you already are a holder of Emprex LM2203, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emprex LM2203.
However, one of the most important roles played by the user manual is to help in solving problems with Emprex LM2203. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emprex LM2203 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
