Instruction/ maintenance manual of the product 16X Emprex
Go to page of 18
16X DVD-ROM DRIVE User’s Manual.
DANGER INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO BEAM VORSICHT INSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET NICHT DEM STRAHL AUSSETSEN ATTENTION RADIATION DU FAISCEAU LASER INVISIBL E EN CAS D’OUVERTURE. EVITER TOUTE EXPOSITION AUX RAYONS.
FCC Compliance Statement This device complies with Part 15 of the FCC Ru les. Operation is subject to the following two condit ions: 1. This device may not cause harmful i nterference, and 2. This device must accept any interferen ce received, including interference that may cause undesired operat ion.
Table of Contents INTRODUCTION 1 S YSTEM R EQUIREMENTS 2 P ACKAGE C ONTENTS 2 INSTALLATION 3 H OST I NTERFACE C ONNECTIONS 3 H ARDWARE I NSTALLATION 4 D RIVER I NSTALLATION 5 For Windows Environment 5.
16X DVD-ROM DRIVE 1 INTRODUCTION Welcome to a multimedia world of DVD technology! This high-performance DVD-ROM drive of ATAPI interface plays DVD titles at maximum 16X DVD-ROM speed and plays CD-ROMs at maximum 48X speed. With the bundled software , you can enjoy the wide range of educational and entertaining CD/DVD titles with theater quality.
16X DVD-ROM Drive 2 System Requirements To install and use the DVD-ROM drive , it is recommended that you have the following for your PC system: ♦ A Pentium TM II 350 MHz or faster CPU ♦ 16 MB RAM (32MB is recommended.
16X DVD-ROM DRIVE 3 INSTALLATION Host Interface Connections Most current mainboard models have two IDE ports (primary and secondary), which can connect two IDE cables. Two IDE cables allow you to connect up to four dev ices, but it is recommended that you separate IDE ports for your hard drive and your DVD-ROM drive.
16X DVD-ROM Drive 4 Hardware Installation 1. Turn off the power to the computer system. 2. Disconnect the power cord and all cables from the back of your computer, and then remove the cover of the computer. 3. Insert the drive into one of the vacant 5.
16X DVD-ROM DRIVE 5 Driver Installation For Windows Environment This DVD-ROM drive is a Plug & Play device. Windows 95/98//Me, and Windows NT/2000/XP will automatically detect the drive and load the appropriate driver. Software Installation The bundled DVD playback software offers maximum video and audio playback entertainment on the PC.
16X DVD-ROM Drive 6 DVD Region Coding Region Playback Control Management All DVD Video Playback systems have “Region Playback Control” (RPC) which is required by Holly wood movie industry and defined by DVD Forum. You can only play DVD-Video discs with the same region code as your DVD-Video Playback system.
16X DVD-ROM DRIVE 7 DVD Video Decoder for PC Systems There are three types of DVD-Video decoders on the market: Type 1: The RPC code has been set by the manufacturer and can’t be changed. Type 2: The RPC code can be changed up to the maximum of four times (except the initial setting).
16X DVD-ROM Drive 8 OPERATION & CONNECTION Front Panel 1. LED Indicator While the tray goes in/out, the indicator flashes green and it’s off when the drive is ready. The indicator flashes green when the drive reads an audio/data CD/DVD. 2. Disc Tray This is the tray for the disc.
16X DVD-ROM DRIVE 9 Rear View 1. Digital Audio Output Connector If your sound card has a digital audio IEC958 format connector, you can connect it to this digital audio output connector with a 2-pin audio cable. 2. Analog Audio Output Connector This connector allows you to connec t the drive to your sound card with a 4-pin audio cable.
16X DVD-ROM Drive 10 TECHNICAL DATA Drive Performance Data Transfer Rate DVD-ROM Single layer: 21632KB/s(16X Max.) Dual layer: 13850 KB/s(10X Max.) CD-ROM: 7200KB/s (48X Max.) Interface E-IDE/ATAPI Data Buffer Memory size 512KB Compact Disc Disc Size 80mm and 120mm discs Disc Data Capacity DVD-ROM: Single layer – 4.
16X DVD-ROM DRIVE 11 Audio output level Line out = 0.6±10%Vrms Headphone out = 0.6±10%Vrms Power Requirements 5V±5%, 12V±10% Dimension Height 41.8 ± 0.
.
.
3100553210 Version 1.0 Dec. 2005.
An important point after buying a device Emprex 16X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emprex 16X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emprex 16X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emprex 16X you will learn all the available features of the product, as well as information on its operation. The information that you get Emprex 16X will certainly help you make a decision on the purchase.
If you already are a holder of Emprex 16X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emprex 16X.
However, one of the most important roles played by the user manual is to help in solving problems with Emprex 16X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emprex 16X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
