Instruction/ maintenance manual of the product GWT-25-2 Empire Products
Go to page of 20
12425-7-0406 Page 1 INST ALLA TION INSTRUCTIONS AND OWNER'S MANUAL GRA VITY VENTED SINGLE W ALL FURNACE MODEL GWT -25-2(SG, RB) GWT -35-2(SG, RB) EFFECTIVE DA TE APRIL 2006 W ARNING: If the information in this manual is not followed exactly , a fire or explosion may result causing pr operty damage, personal injury or loss of life.
Page 2 12425-7-0406 T ABLE OF CONTENTS SECTION P AGE Important Safety Information ................................................................................................. 3 Safety Information for Users of LP Gas ..............................
12425-7-0406 Page 3 • DO NOT put anything around the furnace that will obstruct the flow of combustion and ventilation air . • DO keep the appliance area clear and free fr om combustible material, gasoline and other flammable vapors and liquids.
Page 4 12425-7-0406 Some people cannot smell well. Some people cannot smell the odor of the chemical put into the gas. Y ou must find out if you can smell the odorant in propane. Smoking can decrease your ability to smell. Being around an odor for a time can affect your sensitivity or ability to detect that odor .
12425-7-0406 Page 5 Model GWT -25 GWT -35 Input BTU/HR (KW/H) 25,000 (7.3) 35,000 (10.3) Height 66 1/8" (1679mm) 66 1/8" (1679mm) W idth 16" (406mm) 16" (406mm) Depth 6" (152m.
Page 6 12425-7-0406 Note: No vent equipment supplied with furnace. 4" Oval (all parts purchase locally) 1. T ype B-1 oval pipe 2. Single story type B-1 gas vents require a baseplate and one pair of ceiling plate spacers.
12425-7-0406 Page 7 Check all local codes for requirements, especially for the size and type of gas supply line required. Recommended Gas Pipe Diameter Pipe Length Schedule 40 Pipe T ubing, T ype L (feet) Inside Diameter Outside Diameter Nat. L.P . Nat.
Page 8 12425-7-0406 1. In selecting a location for installation, it is necessary to provide adequate accessibility clearances for servicing and proper installation. 2. Clearances to combustible surfaces are 4" (102mm) from sides, 12" (305mm) to top, 1 1/2" (38mm) from floor .
12425-7-0406 Page 9 62 1/4” (1581 mm) 14 ½” (368 mm) Figure 2 66 1/8” (1679mm) W ALL OPENING Figure 3 FINISHING INSTRUCTIONS Plastering (Figure 4) In new construction use only plain (not perforated) gypsum lath around furnace and vent pipe so that plaster "Keys" will not project into wall space.
Page 10 12425-7-0406 Figure 6 IMPOR T ANT — A void securing too tightly and disturbing the inner casing. Do not try to force furnace into a wall opening which is smaller than specified dimension. OUTER CASING (Figure 6) 1. Align 1 3/4" slot on casing bracket with bottom screw hole on inner casing.
12425-7-0406 Page 1 1 THERMOST A T LOCA TION (SG MODELS) CAUTION — Do not run wire behind flanges of Header Plate or in any location where it might be damaged. Millivolt wall thermostats are specially designed for use on self- generating systems. They should never be used on line or low voltage A.
Page 12 12425-7-0406 FOR YOUR SAFETY READ BEFORE LIGHTING W ARNING: If you do not follow these instructions exactly , a fire or explosion may result causing property damage, personal injury or loss of life. A. This appliance has a pilot which must be lighted by hand.
12425-7-0406 Page 13 VENT SAFETY SHUT OFF SYSTEM This appliance must be properly connected to a venting system. This appliance is equipped with a vent safety shutoff system.
Page 14 12425-7-0406 GENERAL All furnaces have been fire-tested to check for proper operation. This includes main burner flame, pilot flame, and gas control operation. If the furnace fails to function on initial installation, it is advisable to re-check the following: 1.
12425-7-0406 Page 15 USE ONL Y MANUF ACTURER'S REPLACEMENT P ARTS. USE OF ANY OTHER P ARTS COULD CAUSE INJUR Y OR DEA TH. A TTENTION: When ordering parts, it is very important that part number and description of part coincide. Index Part No. Number Description Index Part No.
Page 16 12425-7-0406 P AR TS VIEW 8 27 9 12 11 14 13 10 15 16 20 18 19 21 26 17 22 24 25 7 3 1 2 5 4 6 23.
12425-7-0406 Page 17 Index Part No. Number Description 1 GW -130 Remote Bulb Control Kit 2 R-1224 Remote Bulb Control 3 R-2499 W ire Assembly 4 R-1162 Control Knob 5 R-1720 Plastic Clip (3 Required) 6 R-1223 Instructions 7 R-1578 No. 6-32 x 1/4" (6mm) Screw (2 Required) Caution: Remote bulb wire routing is important.
Page 18 12425-7-0406 Installing Blower Using Three-Pr ong Plug 1. Install furnace according to Installation Instructions and Owner's Manual. 2. Refer to Drawing for measurements to locate (2) mounting holes on wall surface above furnace. On Solid W all 3.
12425-7-0406 Page 19 Fan Control The automatic fan control is located on the bottom of the blower assembly . The fan control is a nonadjustable, automatic type. The fan control will require between 3 and 7 minutes of main burner operation before the fan control "closes" and activates the blower .
Page 20 12425-7-0406 SER VICE NOTES Empire Comfort Systems, Inc. Nine Eighteen Freeburg A ve. Belleville, Illinois 62220-2623 PH: 1-618-233-7420 PH: 1-800-851-3153 F AX: 1-618-233-7097 F AX: 1-800-443-8648 E-MAIL: info@empirecomfort.com WEB SITE: www .
An important point after buying a device Empire Products GWT-25-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Empire Products GWT-25-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Empire Products GWT-25-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Empire Products GWT-25-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Empire Products GWT-25-2 will certainly help you make a decision on the purchase.
If you already are a holder of Empire Products GWT-25-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Empire Products GWT-25-2.
However, one of the most important roles played by the user manual is to help in solving problems with Empire Products GWT-25-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Empire Products GWT-25-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
