Instruction/ maintenance manual of the product 23-700 Empire Comfort Systems
Go to page of 10
INSTR UCTION MANU AL D A TED 6-7-96 P ART NO. 1340208 ©Delta International Machiner y Corp. 1996 Univer sal W et /Dr y Grinder (Model 23-700).
2 SAFETY R ULES W oodwor king can be dangerous if saf e and proper operating procedures are not f ollowed. As with all machiner y , there are cer tain hazards inv olved with the operation of the product. Using the machine with respect and caution will considerably lessen the possibil- ity of personal injur y .
3 Fig. 3 Fig. 4 Fig. 2 ASSEMBLING AND ADJUSTING EYE SHIELD 1. F asten the ey e shield (A) Fig. 2, to mounting brack et (B) using the two screws (C) and nuts (D). 2. Assemble ey e shield and mounting brack et assembly (E) Fig. 3, to side of g r inding wheel guard (F) using lock knob screw and w asher (G) Figs .
4 Fig. 5 Fig. 6 Fig. 8 Fig. 7 ASSEMBLING AND ADJUSTING THE T OOL RESTS 1. Assemble the tool rest (A) Fig. 5, to the wheel guard using the lock knob scre w (B), nut and washer .
5 Fig. 9 ADJUSTING SP ARK DEFLECT OR As the five inch g r inding wheel (H) Fig. 9, wears down due to e xtended use, the spark deflector (J) should be adjusted downw ard with it, so it is alwa ys set close to the grinding wheel for maxim um operator saf ety .
PO WER CONNECTIONS A separate electrical circuit should be used for y our tools. This circuit should not be less than #12 wire and should be protected with a 20 Amp time lag fuse. If an extension cord is used, use only 3-wire e xtension cords which hav e 3-prong grounding type plugs and 3-pole receptacles which accept the tool’ s plug.
7 Fig. 15 Fig. 16 W A TER LEVEL When using the 10 grinding wheel, there should alwa ys be enough water in the base (A) Fig. 15, of the grinder in order that one inch of the lower portion of the grinding wheel will be submerged in water . As water is absorbed into the grinding wheel, additional water must be added into the base.
8 Fig. 21 Fig. 20 Fig. 19 Fig. 18 Fig. 17 DRESSING A GRINDING WHEEL When dressing a grinding wheel, use a suitable silicon carbide stick type dresser , as shown in Fig. 17. Br ing the dresser f orward until it just touches the high point of the f ace of the wheel and dress the wheel by moving the dresser back and f or th.
9 LUBRICA TION Occasionally lubricate the arbor shaft with light machine oil, through the oiler (A) Fig. 22, provided. T o lubricate the wor m gears (A) and (B) Fig. 23, remove the nameplate (C) and apply grease to the two gears (A) and (B) as shown. Fig.
10 Fig. 26 Fig. 27 TEN INCH WET GRINDING WHEEL The ten inch aluminum o xide grinding wheel operates at a slow speed of 70 RPM, which mak es it suitable f or honing cutting tools such as garden tools, chisels and shar pening ax es, as shown in Fig. 26.
An important point after buying a device Empire Comfort Systems 23-700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Empire Comfort Systems 23-700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Empire Comfort Systems 23-700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Empire Comfort Systems 23-700 you will learn all the available features of the product, as well as information on its operation. The information that you get Empire Comfort Systems 23-700 will certainly help you make a decision on the purchase.
If you already are a holder of Empire Comfort Systems 23-700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Empire Comfort Systems 23-700.
However, one of the most important roles played by the user manual is to help in solving problems with Empire Comfort Systems 23-700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Empire Comfort Systems 23-700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
