Instruction/ maintenance manual of the product ERC-1 Emotiva
Go to page of 22
.
.
TABLE OF CONTENTS Thank You for your ERC-1 Purchase 5 Limited Warranty 6 Service Assistance For the ERC-1 6 Emotiva Disclosure 7 FCC Compliance 7 Safety Precautions 8 A Note for the Cable Television (.
TROUBLESHOOTING 20 The disc does not rotate 20 The disc is playing but there is no sound 20 The disc stops, noise is heard or the sound drops out 20 A CD-R / CD-RW disc cannot be played 20 The remote .
THANK YOU FOR YOUR ERC-1 PURCHASE Dear Music Enthusiast, Thank you for purchasing the Emotiva ERC-1 CD Play er. We sincerely believe that it offers you outstanding performance and value. Emotiva pr oducts are engineered and produced with the highest quality materials and incorporate the la test technology.
LIMITED WARRANTY The Emotiva ERC-1 CD Player has been created to perform flawlessly for many years. As a result of this quality and crafts manship, Emotiva offers the follo wing warranty to owners of the ERC-1.
Emotiva Disclosure Copyright 2009 Emotiva All Rights Reserved. Emotiva reserves the right to make improvements to its products at any time. Therefore, the specificat ions of the product and the specif ic details of this manual are subject to change at any time.
SAFETY PRECAUTIONS Read this User's Guide thoroughly before attemp ting to install and c onfigure the ERC-1 CD Player. All the safety and oper ation instructions should be read before any operation of the component(s) begin.
A Note for the Cable Tel evision (CATV) Installer This reminder is to call the CATV system installe r's attention to Article 82040 of the NEC that provides guidelines for proper grounding and in .
TECHNICAL SPECIFICATIONS • Output voltage: 1V rms (7V peak) • Channel separation: ≥ 95dB - ref. 1kHz • Frequency response: 20Hz~20kHz (+/- 0.1dB) • S/N: ≥ 100dB (A weighted ） • THD: ≤ 0.
KEY ERC-1 FEATURES Four (4) independent power supplies to drive each section of the unit separately. This prevents the different sections from interacting and causi ng noise. The separate power supplies apply to: 1. CD carriage 2. Digital section 3. Analog section 4.
DISC HANDLING Use only discs with regular shapes. If an irregular disc (a disc wit h a special shape) is used the ERC-1 may be damaged. Discs usable with the ERC-1 CD Audio (CD-DA), CD-R, CD-RW, HDCD Holding discs Avoid touching the surface of a di sc where recording is performed.
FRONT PANEL LAYOUT 1. PLAY/PAUSE This is used to play and pause the disc. 2. PREVIOUS This is used to jump to the st art of the current trac k or to jump to the start of the previous track. 3. NEXT This is used to advance to t he start of the next track.
REAR PANEL LAYOUT 1. BALANCED OUTPUTS (1 set) These are used to connect the ERC-1 to a si ngle input device (pre/pro, receiver) with balanced (XLR) type cables. 2. ANALOG OUTPUTS (2 sets) These are used to connect the ERC-1 to two separate input devices, (pre/pro, receiver) with RCA type cables.
REMOTE CONTROL . EJECT isc from the unit. sed to dim the displa y light. It also turns off th e it between On and Standby mode. y and Pause the disc. d to jump to the st art of the current track or to sed to search backward and has three different ed to search fo rward and has three different ed to advance to the start of the next track.
11. A-B This allows you to loop a certai n section of a track, a full track, multiple tracks etc. Press once to start the loop, press again where you want the loop to end. The player will now play the section between the two loop points. Press the A-B button again an d the ERC-1 returns to normal play.
CHANGING THE REMOTE CONTROL BATTERIES Emotiva recommends using high quality AAA batte ries in the ERC-1 remote control. To change the remote control batteries y ou will need a small Philips head screwdriver. Remove the six (6) Philips head screws on the back of the remote.
OPERATING INSTRUCTIONS LOADING & EJECTING DISCS 1. Press the Standby/On button, make sure unit is on. 2. The display will read EMOTIVA for a few se conds at power up. LOADING will then appear on the screen. The play er will then say READY. Insert disc into the slot-loader gently.
LOCATING A PARTICULAR POINT IN A TRACK 1. Make sure that the disc is playing the desired track. 2. Press the Left REV Button on the remote cont rol, the CD will then rewind within the track. Press again and the disc will rewi nd faster. Press a third time and the disc rewinds faster.
TROUBLESHOOTING • The disc does not rotate 1. Is the power cable plugged in? 2. Is the power switch on? 3. Is the disc placed upside down? 4. Is the disc dirty? 5. Is the disc scratched? 6. Is the disc warped? • The disc is playing but there is no sound 1.
21 Revised 06/2009 All contents © 2009 Emotiv a Audio Corporatio n..
22 .
An important point after buying a device Emotiva ERC-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emotiva ERC-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emotiva ERC-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emotiva ERC-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Emotiva ERC-1 will certainly help you make a decision on the purchase.
If you already are a holder of Emotiva ERC-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emotiva ERC-1.
However, one of the most important roles played by the user manual is to help in solving problems with Emotiva ERC-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emotiva ERC-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
