Instruction/ maintenance manual of the product MSP-ULOG1 Emerson Process Management
Go to page of 12
Quick-start: For MSP-ULOG1/MSP-ULOG2 MSP-ULOG1/MSP-ULOG2 Quick-start Manual IP2042/QS, Rev. AA January 2006 www.mobrey.com.
(IP2042/QS) January 2006 2 Introduction What is this Quick-start? This Quick-Start is for anyone who has to install and comm ission the MSP-ULOG1 or MSP-ULOG2 ultrasonic system, and does not need in-depth information. For full installation instructions , you must refer to the installation (IM) manuals suppl ie d with the equipment.
January 2006 (IP2042/QS) 3 Installation Location of MSP900SH • Install the transmitter above the liquid surfac e using the bracket provided. Important instru ctions for an open channel flow installation are given in IP2040/IM.
(IP2042/QS) January 2006 4 Getting started After completing the installation of both MCULOG control unit and the MSP 900SH transmitter, the next stage is to switch on. 1. Familiarise yourself with the front panel f ascia. Front Panel Fascia of MCULOGW Key to figure: c 4-line LCD with backlight.
January 2006 (IP2042/QS) 5 How to display the menu system 4. Press the yellow ( ENTER ) key to display the top-level of the menu system. The primary displa y re- appears automatica ll y if there is no keypad activity for several minutes, if on-l ine. In addition, it re-appears when pressing the ESC key whilst at the top level of the menu system.
(IP2042/QS) January 2006 6 Application/Duty: Flow Measurement 1. With power on and the MSP900S H transmitter giving a 4-20mA signal to the MCUL OG unit (see previous pages), you can now programme the MCULOG for an application. This application example is for flow measurements.
January 2006 (IP2042/QS) 7 Application Example: Flow Measurements using Duty Wizard.
(IP2042/QS) January 2006 8 Application/Duty: Logging Overview The MCULOG will log up to 4,800 events, where an event is the value of the Primary Variable (PV) at regul ar intervals; the logging interval is user-defi ne d ( P590 ). An interval va lue of 15 minutes will log the PV at 15-minute intervals, which equates to 50 days elapsed time.
January 2006 (IP2042/QS) 9 Navigating to the LOG GING Menu Menu Map for LOGGING screens.
(IP2042/QS) January 2006 10 Other Features Restoring factory defaults (Erases all user-entered data) To re-set the MCULOG unit back to the factory defaults , navigate to the “Load Defaults” screen a nd press the ENTER key twice .
January 2006 (IP2042/QS) 11 Relays Relay outputs 1 to 4 are normally On Point/Off Poin t relays which may be used to start/stop pumps. They normally energise at one level and de-energise at a different level.
MSP-ULOG1/MSP-ULOG2 Quick-start Manual IP2042/QS, Rev. AA January 2006 The Emerson logo is a trade mark and se rvice mark of Emerson Elec tric Co. Rosemount is a registered trademark of Rosemount Inc. Mobrey is a registered trademark of Mobrey Ltd. A ll other marks are the property of their respective owners.
An important point after buying a device Emerson Process Management MSP-ULOG1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emerson Process Management MSP-ULOG1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emerson Process Management MSP-ULOG1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emerson Process Management MSP-ULOG1 you will learn all the available features of the product, as well as information on its operation. The information that you get Emerson Process Management MSP-ULOG1 will certainly help you make a decision on the purchase.
If you already are a holder of Emerson Process Management MSP-ULOG1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emerson Process Management MSP-ULOG1.
However, one of the most important roles played by the user manual is to help in solving problems with Emerson Process Management MSP-ULOG1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emerson Process Management MSP-ULOG1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
