Instruction/ maintenance manual of the product EM300 Emerson
Go to page of 2
1. Place your telephone on a hard, flat surface. 2. Insert the modular plugs of the coil handset cord into the jack of the telephone handset and into the jack marked “TO HANDSET” at the side of the telephone base (Figure 1). 3. Insert the straight-line cord into the modular jack at the back of the telephone marked “TO WALL JACK”.
Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.
An important point after buying a device Emerson EM300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emerson EM300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emerson EM300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emerson EM300 you will learn all the available features of the product, as well as information on its operation. The information that you get Emerson EM300 will certainly help you make a decision on the purchase.
If you already are a holder of Emerson EM300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emerson EM300.
However, one of the most important roles played by the user manual is to help in solving problems with Emerson EM300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emerson EM300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
