Instruction/ maintenance manual of the product ControlWave GFC Emerson
Go to page of 23
www.EmersonProcess.com/Bristol Product Information Package PIP-Control Wave LS July, 2006 C ontrol Wave Loo p Power Su pp l y Control Wave LOOP POWER SUPPLY PRODUCT INSTALLATION GUIDE For the followin.
IMPORTANT! READ INSTRUCTIONS BEFORE STARTING! Be sure that these instructions are carefully read and understood before any operation is attempted. Improper use of this device in some applications may result in damage or injury. The user is urged to keep this book filed in a convenient location for future reference.
WARRANTY A. Bristol warrants that goods described he rein and manufactured by Bristol are free from defects in material and workmanship for one year from the date of shipment unless otherwise agreed to by Bristol in writing.
How to return material for Repair or Exchange Before a product can be returned to Bristol for repair, upgrade, exchange, or to verify proper operation, form (GBU 13.01) must be completed in order to obtain a RA (Return Authorization) number and thus ensure an optima l lead time.
Bristol Inc. Repair Authorization Form (off-line completion) (Providing this information will permit Bristol Inc. to effectiv ely and efficiently process you r return. Completion is required to receive optimal lead time. Lack of info rmation may result in increased lead tim es.
Bristol Training GET THE MOST FROM YOUR BRISTOL BABCOCK INSTRUMENT OR SYSTEM • Avoid Delays and problems in getting your system on-line • Minimize installation, start-up and maintenance costs. • Make the most effective use of our hardware and software.
A Few Words About Bristol Inc. For over 100 years, Bristol ® has been providing innovative solutions for the measurement and control industry. Our product lines rang e from simple analog chart recorders, to sophisticated digital remote pr ocess controllers and flow computers, all the way to turnkey SCADA systems.
For technical questions regarding ACCOL products, OpenBSI Utilities , UOI and all other software except for Control Wave and OpenEnterprise products, call (860) 945-2286. For technical questions about Network 3000 hardware, call (860) 945-2502. You can e-mail the Application Support Group at: bsupport@bristolbabcock.
PIP-ControlWaveLS 1 Table Of Contents PIP-ControlWaveLS Control Wave Loop Supply Part Numbers 400095-01-7, 721708-01-3 & 721708-02-1 TABLE OF CONTENTS Section Title Page # Section 1 – LOOP SUPPLY INTRODUCTION 1.1 GENERAL DE SCRIPTI ON ..........
PIP-ControlWaveLS Page - 1 Section 1 LOOP SUPPLY INTRODUCTION 1.1 GENERAL DESCRIPTION Bristol’s Control Wave Loop Power Supply (herein referred to as the “ Loop Supply ” ), provides regulated an.
Page - 2 PIP-ControlWaveLS Figure 1 - Control Wave Loop Supply Board Views & Component Identification Diagram Table 1 - Input/Pass-through Power Connectors – TB1 & TB3 TB1 Pin # TB3 Pin # Si.
PIP-ControlWaveLS Page - 3 8-Pin Connector (TB2) accommodate s distribution of the regulated +24V loop supplies. Table 2 - Regulated 24V Supply Distribution Connector TB2 TB2 Pin # Signal Name Description 1, 3, 5, 7 +24V Regulated +24Vdc 2, 4, 6, 8 24V Return Reg.
Page - 4 PIP-ControlWaveLS Section 2 LOOP SUPPLY INSTALLATION 2.1 LOOP SUPPLY MOUNTING Encapsulated Loop Supply Assemblies are prov ided with the printed circuit board (PCB) secured to a Power Supply Back Plate Bracket and protected by a Power Supply Board Cover.
PIP-ControlWaveLS Page - 5 Figure 3 - Encapsulated ControlWave Loop Supply Mounting Diagram.
Page - 6 PIP-ControlWaveLS 2.2 LOOP SUPPLY WIRING Loop Supply’s utilize Terminal Blocks that ar e equipped with compression-type terminals which accommodate a #16 AWG size wire. A conne ction is made by inserting the wire’s bared end (1/4” Max.) into the clamp beneath the screw and then tightening the screw.
PIP-ControlWaveLS Page - 7 Figure 4 - ControlWave MICRO & EFM Loop Supply to I/O Module Wiring.
Page - 8 PIP-ControlWaveLS Figure 5 - Control Wave Express, ExpressPAC and GFC Loop Supply to Process I/O Board Wiring Diagrams Control Wave EFM – System Controller Module - Connector TB1 TB1-1 = +V.
PIP-ControlWaveLS Page - 9 Control Wave ExpressPAC – CPU/System Controller Board - Connector TB1 TB1-3 = POWER IN+ (from loop Supply Connector TB3-3) TB1-4 = GND (from loop Supply Connector TB3-2) C.
Page - 10 PIP-ControlWaveLS Section 3 SPECIFICATIONS 3.1 OPERATING SPECIFICATIONS Function: Provides four isolated 24Vdc power output terminal pairs to power an RTU , a Transmitter and/or a number of non-isolated I/O (associated with a particular Control Wave RTU.
PIP-ControlWaveLS Page - 11 Vibration: 1g for 10-500 Hz on any axis per SAMA PMC-31-1 without damage or impairment. .5g for 150-2000Hz RFI Susceptibility: 10V/meter – 80MHz to 1000MHz 3.3 CONNECTORS 3.3.1 Terminal Block TB1 3-Pin Terminal Block TB1 accommodates input power from the bulk DC source.
Page - 12 PIP-ControlWaveLS Figure 6 - Loop Supply Dimensions Drawing.
Product Information Package PIP-Control Wave LS July, 2006 ControlWave Loop Power Supply The information in this document is subjec t to change without notice. Every effort has been made to supply complete and accurate information. However, Bristol, Inc.
Return to the T able of Content s Return to the List of Manuals.
An important point after buying a device Emerson ControlWave GFC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emerson ControlWave GFC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emerson ControlWave GFC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emerson ControlWave GFC you will learn all the available features of the product, as well as information on its operation. The information that you get Emerson ControlWave GFC will certainly help you make a decision on the purchase.
If you already are a holder of Emerson ControlWave GFC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emerson ControlWave GFC.
However, one of the most important roles played by the user manual is to help in solving problems with Emerson ControlWave GFC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emerson ControlWave GFC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
