Instruction/ maintenance manual of the product CF759OB00 Emerson
Go to page of 10
Part No. F40BP72400001 Form No. BP7240-1 READ AND SA VE THESE INSTRUCTIONS Model No. CF759OB00 CF759PB00 CF759TG00 CF759HTW00 CF759BS00 CF759AB00 CF759WW00 DESIGNER REMOTE Series ® Ceiling Fan Owner&.
2 W ARNING ! WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference.
This Manual Is Designed to Make it as Easy as Possible for Y ou to Assemble, Install, Operate and Maintain Y our Ceiling Fan T ools Needed for Assembly One Phillips head screwdriver One stepladder One 1/4” blade screwdriver One wire stripper Three wire connectors (supplied).
4 How to Put Y our Ceiling Fan T ogether 1. Remove the hanger ball by loosening the setscrew in the hanger ball until the ball falls freely down the downrod (Figure 1). Remove the pin from the downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation in step 5.
7. Remove the three switch housing mounting screws (Figure 5) from the switch housing plate. Position the switch housing assembly on the switch hous- ing plate and align the holes in the switch housing assembly with the holes in the plate. Secure the switch housing assembly by installing the three screws (Figure 6).
If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. 1. Connect the green grounding lead from the hanger ball and the green grounding lead from the hanger bracket to the grounding conductor of supply (this may be a bare wire or wire with green colored insulation).
7 3. Screw the two threaded studs (supplied) into the tapped holes in the hanger bracket. 4. Lift the ceiling cover up to the threaded studs and turn until studs protrude through the holes in the ceiling cover (Figure 13).
8 F AN/OFF FOR/REV LIGHT DIMMER HIGH MED LOW ® Figure 17 Operation of Y our Remote Contr ol 1. To set the desired fan speed, push the HI, MED or LOW buttons to set your fan on high, medium or low speed. (See Figure 17). 2. To reverse the direction the fan is turning, press the FOR/REV button.
9 T r ouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers. 2. Loose power line connections to the fan, or loose 2. Check line wire connections to fan and switch switch wire connections in the switch housing.
Repair Par ts Listing Part Numbers Key Model No. Model No. Model No. Model No. Model No. Model No. Model No. N o. Description CF759AB00 CF759PB00 CF759OB00 CF759TG00 CF759BS00 CF759HTW00 CF759WW00 * H.
An important point after buying a device Emerson CF759OB00 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emerson CF759OB00 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emerson CF759OB00 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emerson CF759OB00 you will learn all the available features of the product, as well as information on its operation. The information that you get Emerson CF759OB00 will certainly help you make a decision on the purchase.
If you already are a holder of Emerson CF759OB00, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emerson CF759OB00.
However, one of the most important roles played by the user manual is to help in solving problems with Emerson CF759OB00. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emerson CF759OB00 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
