Instruction/ maintenance manual of the product ATCA-7150 Emerson
Go to page of 122
Embedded Computing f or Busines s-Critical Continuity TM ATCA-7150 and RTM-ATCA-7150 Getting S tar ted Documen t: 6806800G42B Dece mber 2008.
© 2008 Emerson All rights reserved. T radem arks Emerson, Busines s-Critical Continuity, Eme rson Network Power and the Emerson Network Powe r logo are tradem arks and service marks of Eme rson Electric Co. © 2008 Eme rson Electr ic Co. All other product or service names are the prope r t y of thei r respective owners.
Contents ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 3 About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Safety Notes . .
ATCA-715 0 and RTM-ATCA-71 50 Getting Starte d (6806800G42B) Contents 4 Contents Contents 2.6.4.2 Installin g the FC Daughter Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 2.6.4.3 Replacing the FC Dau ghter Card .
Contents ATCA-715 0 and RTM-ATCA-715 0 Getting Starte d (6806800G42B) 5 3.7.1.3 Power-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 3.7.2 Removal . . . . . . . . . . . . . . .
ATCA-715 0 and RTM-ATCA-71 50 Getting Starte d (6806800G42B) Contents 6 Contents Contents A.15 ACPI Code Checkpoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 B Related Documentation .
List of T abl es ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 7 T able 1-1 F unc tions of the A T CA -7150 and the RTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 T able 1-2 S tandar d Compli ance s .
ATCA-7150 and RTM-A TCA-7150 Getting Started ( 6806800G42B) 8 List of Tables.
List of Figures ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 9 Figure 1-1 Connection Bet ween the A T CA -7150 and the RTM . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Figure 2-1 W earing the ESD -Preven tive W rist Strap . .
ATCA-7150 and RTM-ATCA-7150 Getting Started ( 6806800G42B) 10 List of Figures.
ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 11 About this Manual Overview of Contents This documen t describes the A T C A-7150 and RTM- A T CA -7150 server suite (he reina f ter ref .
ATCA-715 0 and RTM-ATCA-715 0 Getting Starte d (6806800G42B) About this Manual 12 About this Manual Abbreviations This docume nt use s the follo wing abbrevi ations: Abbre via tion Definiti on ACA Aus.
About this Manual ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 13 Conv entions The following table describes the conv entions used throughout this manual.
ATCA-715 0 and RTM-ATCA-715 0 Getting Starte d (6806800G42B) About this Manual 14 About this Manual Summar y of Changes This manual h as bee n revised and repl aces all prior editions. ... Re peated ite m for example node 1, node 2, ..., node 12 . . .
About this Manual ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 15 Comments and Suggestions W e welcome and apprecia te your commen ts on our docu mentation. W e want to know what you think about our manuals and how we can make them better .
ATCA-715 0 and RTM-ATCA-715 0 Getting Starte d (6806800G42B) About this Manual 16 About this Manual.
ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 17 Sa fet y N otes This section provide s warning s that prec ede pot enti ally dangerou s procedures t hroughout this manu al. Instructions contained in the warning s must be follo wed during all pha ses of operation, serv ice , and repair o f this equipment.
ATCA-7150 and RTM-ATCA-7150 Getting Started ( 6806800G42B) Safety Notes 18 Opera tion of this equipme nt in a re siden tial ar ea is li ke ly to caus e harmful inte r fere nce in which case the u ser will be required to c orrec t the inte r fe renc e at his own expense .
Safety Notes ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 19 Installation Dam age of the Product and Additional Device s and Modules Incorrect i nstallation or removal of additional devices or modules may d amage the produc t or the additional de vices or modules.
ATCA-7150 and RTM-ATCA-7150 Getting Started ( 6806800G42B) Safety Notes 20 Emerson Net work Powe r Embedded Computing (E NPEC) and our supp liers take significant ste ps to e nsure there are no ben t pins on the backplane or connector d amage t o the boar ds prior to le aving the fac tor y .
Safety Notes ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 21 Battery Board/Syste m dama ge Incorr ect exch ange of lithium ba tteries can re sult in a hazar dous explosion. When ex changing the on-board lithiu m batte r y , mak e sure that the new and the old ba tte r y are exactly the same batt ery models.
ATCA-7150 and RTM-ATCA-7150 Getting Started ( 6806800G42B) Safety Notes 22.
ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 23 Sicherheitshinw eise Dieses K apite l enthält Hinwe ise, die pote ntiell ge fährliche n Prozedure n innerhalb dies es Handbuchs v orrangeste llt sind.
ATCA-7150 and RTM-ATCA-7150 Getting Started ( 6806800G42B) Sicherheitshinweise 24 EMV Da s Produkt wurde in e inem Emerson Network Powe r Stand ardsyst em get este t. Es er füllt die für digitale Ge räte der Kl asse A gültige n Grenzwerte in eine m solchen Syst em gemäß de n FCC - Richtlinie n Abschnitt 15 bzw.
Sicherheitshinweise ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 25 Überhitzung und Be schädigung des Produkte s Betre iben Sie das Pro dukt ohne Zwangs belüftung, kann da s Produkt überhitzt und sc hließlich beschädigt w erde n.
ATCA-7150 and RTM-ATCA-7150 Getting Started ( 6806800G42B) Sicherheitshinweise 26 Beschädi gung des Produkte s, der Backplane ode r von Syst em K omponente n V erbogen e Pins oder lose K omponent en könne n zu e iner Be schädigung de s Produktes, de r Bac k pla ne od er von S yst emko mpo n enten f üh ren .
Sicherheitshinweise ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 27 Umw eltsc hutz Entsor gen Sie alte Batt erien und Blad es/RTM s stets ge mäß der in Ihrem Land gültigen Gesetzgebung und de n Empfehlungen de s Herstelle rs.
ATCA-7150 and RTM-ATCA-7150 Getting Started ( 6806800G42B) Sicherheitshinweise 28.
Chapter: 1 ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 29 Introduc tion 1.1 F eatures The A T C A-7150 and RT M -A T C A-7150 ser ver bl ade suite fe atures the cap abilities o f high speed calculation and mass da ta processing.
Introduction ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 30 Figure 1 -1 shows the connection bet ween the A T C A-7150 and the RTM of the ser ve r blade .
Introduction ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 31 T able 1-1 lists the func tions of the A T CA -7150 and the RTM. T able 1-1 Fun ctions of the A T C A-7150 and the R TM Function Description Processing functio ns z Suppor ts t wo dual-core L V In tel X eon 5138 ( 2.
Introduction ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 32 1.2 Standard C ompliances This product meets the follo wing standards. 1.3 Ordering Information When or dering boar d varian ts or board acces sories, use the orde r numbers give n on the following p ages.
Introduction ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 33 1.3.1 Suppor ted Board Models The following table expl ains the produc t nomenc l ature used f or the available board vari ants. 1.3.2 Board Acce ssories As of the printing date of this m anual, the f o llowing board acc essories wer e available .
Introduction ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 34 A T C A7X50-HDDx-SAS/SA T A A T C A7X50-HDD1-SAS A T C A7X50-HDD2-SAS A T C A7X50-HDD3-SA T A ATC A 7 X 5 0 T able 1-4 Avai.
Chapter: 2 ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 35 Installation of th e RTM -A T C A -7150 2.1 Ov er view This chap ter describes : z Unpacking and inspecting RTM- A T C A-7150.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 36 3. Re move the desiccan t bag shipped together with the blade and dispose o f it accor ding to y our coun tr y ’s legislation.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 37 2.3.2 Po wer Requirements Vibration 1.0g from 5 to 1 00 Hz and back to 5 Hz a t a ra te of 0.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 38 2.4 Module Installation and Remo val Note the f ollowing poin ts at the time o f installing R TM- A T .
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 39 z Hold the ejector handle s and the face pl ate when you ins ert or remove RTM-A T C A -7150. Do not touch the components inside o f the blades. z Kee p the blade verti cal when you instal l RTM- A T C A-7150.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 40 2.5 Installation Preparations The installa tion prepa rations proce ss inc ludes : z che c k t h e i n.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 41 T o we ar the ESD -preve ntive wrist strap, proc eed as follo ws: 1. Wr ap the E SD -preven tive wrist strap around your wrist, as sho w n in the figure bel ow .
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 42 2.5.2 R emoving Fille r Blades If the slot is occupied with a fil ler blade y ou hav e to remov e it first. Af ter a filler blade is re m oved, pl ace it in the equipment room or othe r moisture-proof and dust -proof place s.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 43 T o remo ve the filler blade , proceed as follo ws: 1. A s s how n i n st ep 1 of th e f igu re b elow, use a sc rewdriv er t o anticl ock wise loose n the t wo cap tive scre ws on a filler blade .
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 44 2.6.1 Precautions Note the f ollowing poin ts at the time o f installing or repl acing compo nen ts : .
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 45 z Ensure that y our sleeves are tighte ned or rolled up ab ov e the elbow . For safe t y purpose , it is not recommended to wear jewelr y, wa tch, glasses with metal frame, or clothes with metal buttons.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 46 z Othe rs If a serious proble m occurs and cannot be solved when y ou install or replac e the com p on ent , cont a c t E mer s on N et wo r k P o wer Embedded Computing f or technical suppor t.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 47 2.6.3.1 Installation Positions When the GE d aughter card is us ed with the RTM- A T CA -7150 it can be installed on the daught er card c onnec tor J1, J2, J3, J4.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 48 2.6.3.2 Installing the GE Daughter Card T o install the GE daughter car d, proceed as f ollows. 1. W ear the ESD -preven tive wrist strap. F o r more inf o rmation re fe r , We a r i ng t he E S D - Preve ntive W rist Str ap .
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 49 6. Insert the GE daughte r card in R TM - A T CA -7150 by fac ing the daughte r card at an angle of 45° to the R TM.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 50 card is fa stened by the pla stic latch es. See st ep 3 in the figure belo w .
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 51 7. Insert RTM -A T C A-7150 with the GE daugh ter car d installed in the shelf . For more infor mat io n r efer , Installing R TM- A TCA-7150 . Af te r installa tion, check if R TM -A T C A -7150 ca n be powered on and work norm ally .
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 52 6. T ake the new GE d aughter card out o f the antistatic package .
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 53 7. Insert the GE daughte r card in R TM - A T CA -7150 by fac ing the daughte r card at an angle of 45° to the R TM.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 54 3. As shown in step 1 o f the figure below , inse r t t wo plastic supports verticall y in the holes u sed to f aste n the FC daughte r card.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 55 6. Insert the GE daughte r card in R TM - A T CA -7150 by fac ing the daughte r card at an angle of 45° to the R TM.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 56 card is fa stened by the pla stic latch es. See st ep 3 in the figure belo w . 7. Insert RTM-A T C A-7150 with the FC daughter card installed in the she lf .
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 57 infor mat io n r efer , Installing R TM- A TCA-7150 . Af te r installa tion, check if R TM -A T C A -7150 ca n be powered on and work norm ally . Use the optical fibe r to connect RTM- A T CA -7150 to the external stor age system.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 58 6. T ake the new FC d aughter card out o f the antistatic package.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 59 7. Insert the FC daughter card in R TM- A T CA -7150 by fac ing the daught er card a t an angle of 45° to the R TM.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 60 Installation Procedure wi th Installed Front Blade The following proc edure describes the installati on of RTM- A T C A-7 150. It assumes that y our syste m is power ed on.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 61 5. As shown in step 1 o f the figure below , align the upper and lowe r sides of RTM- A T CA -7150 with the guide rails (the edges of the slot).
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 62 2.7.2 Remo ving RTM -A T C A-7150 T o remo ve RT M -A T C A-7150, proceed as f ollows: 1. W ear the ESD -preven tive wrist strap. F o r more inf o rmation re fe r , We a r i ng t he E S D - Preve ntive W rist Str ap .
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 63 5. As shown in ste p 3 of the figure below , remo ve RT M -A T C A-7150 along the guide rails. 6. Plac e RTM -A T CA -7150 in the antistatic pack age . 2.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 64 If RTM- A T C A-7150 is configured with the GE daughte r card and FC daughte r card, it provides the ex te rnal GE network por ts and ex ternal FC in te r face s.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 65 2.8.2 Connec tin g Net work Cables When R T M- A T CA -7150 is confi gured with the GE daughte r card, it provides two ex terna l Etherne t inte r fac es with 10/100/1000M Bas e- T auto -negoti ation.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 66 The figure belo w shows the me thod of c o nnec ting the net work cables to RT M -A T C A-7150.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 67 As shown i n step s 1 and 2 in the figu re below , inser t the optical modu le in the FC inter face and then insert the o ptical fibers in the optical module.
Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 68.
Chapter: 3 ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 69 Hardware Installation o f A T C A-7150 3.1 Ov er view This chap ter describes : z Unpacking and inspecting the blade z Enviro.
Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 70 3. R emov e the desiccant bag shipped toge ther with the blade and dispos e of it acco rding t o your c ountr y’s legislatio n. Unpacking the Blade T o unpack and check the A T C A -7150 suite , proceed as fo llows: 1.
Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 71 3.3 Environmental and P ower R equirements The following en vironmental and power rewu ireme nts are applicable t o the blade.
Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 72 3.3.2 Po wer Requirements Mak e sure that the blade is u sed in an AdvancedT CA shelf connected to -48VDC up to -60VDC, acco rding t o T e lecommunica tion Net work V oltage (TNV-2).
Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 73 3.4 Precautions Note the f ollowing poin ts at the time o f installing R TM- A T CA -7150: z If an RTM is planned to be used, you must install the RTM in the slot before installing t he A T CA -7150 in the paired slot.
Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 74 3.4.1 ESD Prev ention Static electricit y may hur t you or damage the device . T o minimize the dama ge, pay a ttention to the f ollowing poin ts: z Bef ore you oper ate the devic e, wear the ESD -prev en tive wrist strap.
Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 75 3.5 Checking the Installation Environment T able 3-4 lists the envir onment f or installing the A T CA -7150 suite .
Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 76 T o we ar the ESD -preve ntive wrist strap, proc eed as follo ws: 1. W rap the ESD -preve ntive wrist strap around your wrist, as sh own in Figure 3-1 .
Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 77 3.5.2 Remo ving Blank Fi ller Blades z Af te r you re move a bl ank filler blade , store it in the equipment room or a d amp -proof and dust -proof place .
Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 78 Bef ore you install the A T C A-7150 suite , remo ve bl ank filler blades fr om installation slo ts as fol l ow s: 1. Use a screwdrive r to anticlockwise loosen the two captiv e screws on a blank fille r blade , as shown in Figure 3- 2 .
Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 79 3.6.1 Precautions When you install or replac e components, pa y atten tio n to the following points: z Wear th e E SD -p reventi ve w ri st st rap to p revent the st at ic el ec t ric it y fr om dama gin g t he device .
Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 80 T able 3-5 lists the optional co mponen ts suppor ted by the A T CA -7150.
Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 81 z Prep aring spare pa r ts and tools — Prepare the c o mponent t o be installed or replac ed. When y ou hold or transport the componen t, use the speci al antistatic pack age .
Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 82 Figure 3 -3 shows the positions of the DIMM int erfaces on the A T CA -7150. 3.6.4.1 Installing the DIMM T o install the DIMM, proceed as follows : 1. W ear the ESD -preven tive wrist strap.
Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 83 2. Lay the A T C A-7150 w here the DIMM is to be installed on the antistatic de sktop . 3. T ake the DIMM out of the antistatic package. 4. Mak e sure that two interface fixing clips are fully open.
Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 84 7. Inser t the A T C A-7150 with the DIMM installed in the shelf . For de tails, see Ins tal ling the A T C A-7150 in a Powered She lf on page 91 . Af te r installation, inse r t the A T CA -7150 in the shelf and powe r on the A T C A-7150.
Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 85 For de tails, see Remo ving the A T C A-7150 on page 95 .
Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 86 8. Install the A T C A -7150 with the DIMM replac ed. For de tails, see Ins tal ling the A T C A-7150 in a Powered She lf on page 91 . Af ter repla cement, che ck w heth er the OS can be lo aded prop erly .
Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 87 3. Exer t even fo rce to pus h t he hard dis k s mo o thly in the hard disk holder . Al ign the screw holes at the sides of the hard disk with th ose at the sides of the holde r , as shown in Figu re 3-6 .
Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 88 Af te r installation, c heck whether the A T C A -7150 can be powe red on and work norm ally and whethe r the da ta in the har d disk can be re ad and written normally .
Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 89 3.6.5.2 Replacing the Hard Disk T o repl ace the hard disk, proc eed as f ollows: 1. W ear the ESD -preven tive wrist strap. For de tails, see Wearing the ESD -Preventive W rist Strap on page 75 .
Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 90 Af te r repl ace men t, check whethe r the A T C A-7150 can be powered on and wo rk normally and whethe r the da ta in the har d disk can be re ad and written normally .
Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 91 3.7 Installing and Re mo ving the Blade 3.7.1 Inst allation RTM-A T C A-7150 must be installed befo re the A T C A-7150 to av oid product damage .
Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 92 6. User the screwdriv er to clockwise faste n the screws to fix the A T C A-7150, as shown in Figure 3-8 . 7. Fully ope n the ejector handle s and the A T C A -7150 is re ady for powe r -on.
Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 93 z The cables are prope rly connected. z The cables are we ll bound. 3.7.1.3 Power-On 3.7.1.3.1 Checks Before Power-On Bef ore power -on, you need to c onfirm tha t: z The RTM of the server blade and SMM are installed properly .
Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 94 2. Close the upper and lowe r ejector handles. The HO TSW AP LED bl inks at the shor t blink rate. The OOS and HEAL THY LEDs blink for 10 times at the same time .
Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 95 3.7.2.1.1 Checks Before Power-Off Bef ore power -off , you need to con firm that: z Da ta has been s aved on the A T CA -7150. z No application runs on the A T C A-7150.
Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 96 4. R emov e the A T C A -7150 along the guide rails, a s shown in Figur e 3-9 . 5. Plac e the A T C A-7150 in the antistatic package . 3.8 Ejector Handles The A T C A-7150 suppor ts hot swap.
Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 97 T able 3-7 describes the inse r tion and remov al of the A T C A -7150 by u sing the ej ector handles. Power -O n a nd Power -O ff T able 3-8 describes the powe r-on and pow er -off of the A T CA -7150 by using the e jector handles.
Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 98.
Appendix: A ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 99 A Tr o u b l e s h o o t i n g A. 1 O v erv i e w This chap ter describes : z Precautions z Principles z Res ou r ce s z LED Disp la y Exc eptions z Power -On Star tup E xc eptions z OS Excepti ons A.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 100 z Analyze the alarm of high leve l and then that of low lev el. Analyze the alarm o f high leve l, such as critical alarm or major al ar m. Then, analyze the alarm of low leve l, su ch as minor alarm or warning alarm.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 101 z Detailed descr iption on the fault z Device type and sof t ware version z Mea sures tak en after the f ault occurred .
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 102 The IS LED of the A T C A-7150 blinks (red). The alar m sev erit y varies with the blinking freque ncy . The higher the blinking freque ncy , the more serious the alarm.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 103 3. Check the power supply o f the shelf . If the powe r is low , the A T C A-7150 cannot be po wer ed on through the S MM. 4. Check whether the S M M is firmly inse r ted in the prope r position and works we ll.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 104 T o solve the proble m, proceed a s follo ws: 1. Make sure tha t all DIMMs of correct t ype are installed in the slots properly . 2. Check f or consiste nc y of the siz e and frequency of the installed DIMMs.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 105 A .9.2 A T C A-7150 Automatically Shuts Do wn Desc rip tion The A T C A-7150 automa tically shuts do wn without any explic it rea son. Solution T o solve the proble m, proceed a s follo ws: 1.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 106 A .10.2 Mouse Cannot Be Used Desc rip tion The mouse cannot be u sed.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 107 5. Re place the monitor or A T C A-7150. For details on how to re plac e the monitor , ref er to the docume nt shipped wi th the monitor th at you u se . For details on ho w to repl ace the A T C A-7150, see Installing and R emovin g the Blade on page 91 .
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 108 T o solve the proble m, proceed a s follo ws: 1. Make sure that: z The RTM of the server blade is inse r ted properly . z The upper and lowe r ejec tor ha ndles are fully closed.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 109 T o solve the proble m, proceed a s follo ws: 1. Make sure th at the net work module that y ou use is installed in the server syste m and works normally . For details, ref er to the respective syste m documenation.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 110 If you think tha t the fault is cau sed by so f t ware , see A Fault Occurs in Soft ware on p age 109 . Dam aged CMOS da ta or BIOS codes ma y c ause some unc er tain problems.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 111 5. Install and powe r on the A T C A-7150. If the problem persists, repl ace the following com p on ent s i n o rd er : a.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 112 04 Check the CMO S diagnostic b y te to dete rmine whether ba tter y powe r is prope r and whethe r the CMOS checksum is proper . V erif y the CMOS checksum by reading the storage area.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 113 13 Initi aliz e early POST c hipse t registers. 1. Re st art the A T C A-7150. 2. Re plac e the A T C A-7150. 24 Uncompress and initializ e the specific BIOS mo dules of any p latf orm.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 114 3B T est f or total memory in stalled in the system. Also, Check for the Dele te or ESC key to limit mem or y test. Displa y total memor y in the sys tem. 1. Restart the A T CA -7150.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 115 A .14 DI M Code Checkpoints The device initi alization man ager (DIM) gets control a t various time during BIOS POST to initialize diff eren t system buses. 85 D i splay er ro rs to t he user an d g et t h e use r response f or errors.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 116 T able A-2 lists the c heckpoin ts where the DIM module is a cces sed and solutions.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 117 T able A - 2 DI M co de ch eck po ints Checkpoint Description Solution 2A Initia liz e diff eren t bus es and perform t.
Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 118 A. 1 5 A C P I C od e C he ck p oi nt s ACPI che ck poi nts ar e di splaye d w hen an ACPI cap abl e OS eit her enter s o r l eaves a sl eep s t ate. T able A-3 lists the t ypes of c heckpoints tha t may occur during ACPI slee p or wake states and solutions.
Appendix: B ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 119 B R elated Document ation B.1 Emerson Net work P ow er - Embedded Computing Doc uments The Emerson Net work Powe r - Embedded Computing publica tions listed be low are ref erenced in this manual.
Related Documentation ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 120 PICMG picmg.or g/specifica tions.stm PICMG 3.0 Revision 2.0 Advanced T C A Base Specification PICMG 3.
.
HOW TO R EACH LITERA TURE AND TEC HNICAL SUPPORT: Te m p e , A r i z o n a , U S A 1 800 759 1107 1 602 438 5720 Munich, Germ any +49 89 9608 0 For lite rature , training, and technical assistance and support progra ms, visit www .emersonnetworkpowe rembedde dcomputi ng.
An important point after buying a device Emerson ATCA-7150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emerson ATCA-7150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emerson ATCA-7150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emerson ATCA-7150 you will learn all the available features of the product, as well as information on its operation. The information that you get Emerson ATCA-7150 will certainly help you make a decision on the purchase.
If you already are a holder of Emerson ATCA-7150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emerson ATCA-7150.
However, one of the most important roles played by the user manual is to help in solving problems with Emerson ATCA-7150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emerson ATCA-7150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center