Instruction/ maintenance manual of the product ET1529L Elo TouchSystems
Go to page of 160
E l o E n t u i t i ve T ou c h m on i t o r U se r G u i d e F o r 15 ” L CD D e sk t op E T 15 29L S e r i e s R e v i s i o n . B.
E l o E n t u i t i ve T ou c h m on i t o r U se r G u i d e 15 " L C D D e s k t op E T 1 529 L S e r i e s R ev i s i on B P / N 008603 E l o To u c h S ys t e m s , I n c .
C o p y r i gh t © 20 05 E l o T o u c h S ys t e m s I n c . A l l R i gh t s R e se r ve d . N o p a r t o f t h i s p ub li ca t i on m a y b e r e p r odu c e d , t r a n s m i tt e d , t r a n s.
C hap t e r 1 I n t r od u c t i on 1 P r odu c t D e sc r i p t i on .................................................. 1 D e t a il ed L CD D i s p l a y P e r f o r m an c e R equ i r e m en t s .....................................................
T ou c h m on i t o r S pe c i f i c a t i on s ......................... 46 A cc u T ou c h T ou c h sc r een S pe c i f i c a t i on s ................................................. 47 I n t e lli T ou c h T ou c h sc r een S pe c i f i c a t i on s .
.
C H A P T E R 1 I N T R O DUC T I O N P r odu c t D esc r i p t i on T h e ET 1529 L i s a r e t a il t e r m i n a l d e s i g n e d t o p r e s e n t i n f o r m a ti on t o t h e op e r a t o r a n d t h e c u s t o m e r . T h e ET 1529 L i s a v a il a b l e i n s e r i a l a n d U S B v e r s i on s o r c o m b o t ou c h m on it o r .
T h e c r e d it ca r d r ea d e r r ea d s a ll t h r ee s t r i p e s on a s t a n d a r d c r e d it ca r d o r d r i v e r s li ce n s e . T h e c r e d it ca r d i s r ea d by s li d i n g t h e .
12.1 C u s t o m e r D i s p l ay T F T L C D D i s p l ay P a n e l D i s p l a y F o r m a t 800x 600 D i s p l a y a r ea 12 .1” 246 .0 m m ( H ) x 1 84.
C u s t o m e r D i s p l ay T h e C u s t o m e r D i s p l a y i s a t w e n t y c h a r a c t e r t w o li n e v a c u u m f l u o r e s ce n t d i s p l a y ( V F D ) .
Sp ec i f i c a t i o n s S e n s o r S e c u G e n F O R I m a g e C a p t u r e S p e e d 600 m s / fr a m e I m a g e T r a n s f e r S p ee d 500 B y t e / m s P i x e l R e s o l u ti on 356 x 29.
S i x P o r t U S B H ub T h e H u b p r ov i d e s 4 i n t e r n a l U S B p o r t s t o b e u s e d b y t h e c r e d it ca r d r ea d e r , t h e f i n g e r- p r i n t r ea d e r , t h e t ou c h s c r e e n , a n d t h e c u s t o m e r d i s p l a y .
C H A P T E R 2 I N S T A LL A T I O N AN D S E T U P T h i s c h a p t e r d i s c u s s e s h o w t o i n s t a l l you r L C D t o u c h m on i t o r a n d h o w t o i n s t a ll E l o T ou c h S y s t e m s d r i v e r s o f t w a r e .
P r odu c t O ve r v i e w M a i n U n i t o r R ea r V i e w 2 - 8 E l o E n t u i t i v e T ou c h m on i t o r U s e r G u i de.
S i d e V i e w B ase B o tt o m V i e w 2 - 9 o r.
K e n s i ng t o n T M L o c k T h e K e n s i n g t on T M l o c k i s a s e c u r it y d e v i ce t h a t p r e v e n t s t h e f t . T o f i n d ou t m o r e a b ou t t h i s s ec u r it y d e v i ce , d o t o h tt p :// w w w . k e n s i n g t on .
U S B I n t e r f ace C onn ec t i on Y ou r t ou c h m on it o r c o m e s w it h on l y on e t ou c h s c r ee n c on n ec t o r ca b l e s : U S B ca b l e .
C A U T I O N B e f o r e c on n e c t i n g t h e c ab l e s t o y ou r t ou c h m on i t o r an d P C , be s u r e t h a t t h e c o m p u t e r a nd t ou c h m on i t o r a r e t u r n ed o ff.
T h e f o ll o w i n g i ll u s t r a ti on s g u i d e y o u s t e p b y s t e p i n c on n ec t i n g y o u r t ou c h m o n it o r u s i n g a U S B ca b l e c o n n ec ti on . P o w e r c o r d C on n ec t on e e n d o f t h e p o w er c o r d t o t h e m on it o r a n d t h e o t h e r e n d t o w a ll .
V i d e o ca b l e C onn ec t o n e e n d o f t h e v i d e o c a b l e t o t h e r ea r s i d e o f c o m p u t e r a nd t h e o t h e r t o t h e L C D . T i g h t e n b y t u r n i ng t h e t w o t h u m b s c r e w s c l o c k w i s e t o e n s u r e p r op e r g r ou n d i n g .
S p e a k e r ca b l e C on n ec t on e e n d o f t h e s p e a k er c a b l e t o t h e s p ea k e r p o r t i n t h e c o m p u t e r a n d t h e o t h e r e n d t o t h e p o r t i n t h e m on it o r .
U S B ca b l e C on n ec t on e e n d o f t h e U S B c a b l e t o t h e r ea r s i d e o f t h e c o m p u t e r a n d t h e o t h e r t o t h e L C D m o n it o r . T h e U S B ca b l e i s f o r op ti o n a l t ou c h , M S R , C D a n d F i n g e r P r i n t R ea d e r .
R e p l ac e t h e C a b l e C o ve r C a b l e c o v e r li p ca b l e s T h e n y ou h a v e a tt a c h e d a ll t h e ca b l e s t o t h e m on it o r , g e n tl y b r i n g a l l t h e ca b l e s t o w a r d t h e s t a n d a r d s o t h e y f i t u n d e r t h e c ov e r li p .
O p t i m i z i ng t h e L CD D i s p l ay T o e n s u r e t h e L C D d i s p l a y w o r k s w e ll w it h y ou r c o m p u t e r , c on f i g u r e t h e d i s p l a y m od e o f y ou r g r a p h i.
M a gn e t i c S t r i p e R e a d e r N o d e v i ce a r e n ee d e d . T e s t i ng t h e U S B M S R K ey bo a r d E m u l a t i on 1 P l u g i n t h e d e v i ce . 2 O p e n M S W o r d . 3 S li d e t h e ca r d t h r o u g h t h e M S R t o v i e w t h e d a t a .
1 . 5 T h i s d i a l o g w ill a p p e a r 1 . 6 S w i p e T e s t ca r d . 1 . 7 C l o s e R ea d C a r d s D i a l og . 1 . 8 C li c k o n S e nd C o mm a n d . T h e f o l l o w i n g d i a l og b ox w ill a p p ea r 1 . 9 T o s e nd I nq u i r y M S R t yp e 1 .
1 . 1 1 T h e n c li c k on S e n d M e ss a g e . 1 . 12 T h e DA T A = 00 m ea n s i t ’ s U S B H I D . 1 . 13 S w i t c h t o K e y bo a r d E m u l a t i on 1 . 14 T y p e 01 10 0 1 i n t o a r ea u n d e r t h e h ea d i n g M e ss a g e ( H e x ) 1 .
1 . 19 T h e DA T A = 01 m ea n s i t ’ s U S B K e y bo a r d E m u l a ti on . 1 . 20 Y ou m u s t no w r e s e t t h e M S R b y s e n d i ng t h e c o mm a n d 02 . 1 . 21 T y p e 02 i n t o a r ea u n d e r t h e h ea d i n g M e s s a g e ( H e x ) 1 .
1 . 2 c li c k on A b ou t t o v e r i f y v e r s i on 1 . 3 C l o s e A bou t D i a l og . 1 . 4 C li c k on S e nd C o mm a n d s 1 . 5 T h i s D i a l o g w i ll a p p ea r . 1 . 6 T o s e n d I n q u i r y M S R t y p e 1 . 7 T y p e 00 10 i n t o a r ea u n d e r t h e h ea d i n g M e ss a g e ( H e x ) 1 .
1 . 9 T h e DA T A = 01 m ea n s i t ’ s U S B K e y bo a r d E m u l a ti on . 1 . 10 S w it c h t o H I D 1 . 1 1 T y p e 01 10 0 0 i n t o a r ea u n d e r t h e h ea d i n g M e ss a g e ( H e x ) 1 . 12 T h e n c li c k on S e n d M e ss a g e .
1 . 19 C li c k on R ea d C a r d s … 1 . 20 T h i s d i a l o g w ill a p p e a r 1 . 21 S w i p e T e s t ca r d . 1 . 22 C o s e R e a d C a r d s D i a l og .
R e a r F a c i ng C u s t o m e r D i s p l ay U S B C u s t o m e r D i s p l ay P l u g i n t h e U S B c a b l e a t t a c h e d t o t h e C u s t o m e r D i s p l a y u n i t . T h e N e w H a r d w a r e W i z - a r d d i a l o g box w il l a pp ea r .
T o t e s t t h e d r i v e r s : 1 I n w i n d o w s c l i c k o n S t a r t > R un 2 E n t e r “ c m d ” > O K 3 T y p e “ E C H O EL O > .
I n s t a lli ng t h e U S B Tou c h D r i ve r I n s t a lli ng t h e U S B Tou c h D r i ve r f o r W i ndo w s XP , W i ndo w s 2000 , M e a nd 98 1 I n s e r t t h e E l o C D - R O M i n y ou r c o m p u t e r ’ s C D - R O M d r i v e .
C H A P T E R 3 O PE RA T I O N A bou t T ou c h m on i t o r A d j u s t m e n t s Y ou r t ou c h m on it o r w ill u n li k e l y r e q u i r e a d j u s t m e n t .
5 4 3 2 1 15 . 0 ” L CD Fun c t i on K ey C o n t r o l s F un c t i o n 1 P o w e r S w i t c h T u r n s t h e d i s p l a y s y s t e m po w e r o n o r o f f .
C on t r o l s a n d A d j u s t m e n t O S D Lo c k / U n l o ck Y ou a r e a b l e t o l o c k a n d u n l o c k t h e O S D f ea t u r e . T h e m on it o r i s s h i p p e d i n t h e u n l o c k e d p o s iti on . T o l o c k t h e O S D : 1 P r e ss t h e M e nu b u tt on a n d b u tt on s i m u lt a n e ou s l y f o r 2 s e c on d s .
O S D C on t r o l O p t i on s B r i gh t n e ss • B a c k g r o u n d L u m i n a n ce o f t h e L C D p a n e l i s a d j u s t e d . C on t r a s t • A d j u s t s t h e c on t r a s t o r t h e v a l u e s o f c o l o r g a i n ( R E D , G R EE N o r B L U E ) .
L a ngu a g e • L a n g u a g e s u s e d f o r O S D m e n u d i s p l a y : E n g li s h , F r e n c h , G e r m a n , S p a n i s h a n d J a p a n e s e . R eca ll D e f a u l t s • R eca ll s t h e f a c t o r y O S D d e f a u lt s e tti n g s .
C A U T I O N I n o r de r t o p r o t e c t t h e L CD , be s u r e t o h o l d t h e ba s e w h en ad j u s t i n g t h e L CD , a n d t a k e c a r e n o t t o t ou c h t h e sc r een .
4 3 2 1 12 . 1 ” L CD Fun c t i on K ey C o n t r o l s F un c t i o n 1 S e l ec t D i s p l a y s t h e O S D m e n u s on t h e s c r ee n a nd u s e d t o s e l ec t ( “ C l o c k w i s e ” a n d “ C ou n t e r- c l o c k w i s e ” d i r ec ti on ) t h e O S D c on t r o l op ti on s on t h e s c r ee n .
C on t r o l s a n d A d j u s t m e n t O S D Lo c k / U n l o ck Y ou a r e a b l e t o l o c k a n d u n l o c k t h e O S D f ea t u r e . T h e m on it o r i s s h i p p e d i n t h e u n l o c k e d p o s iti on . T o l o c k t h e O S D : 1 P r e ss t h e M e nu b u tt on a n d b u tt on s i m u lt a n e ou s l y f o r 2 s e c on d s .
O S D C on t r o l O p t i on s B r i gh t n e ss • B a c k g r ou nd L u m i n a n c e o f t h e L C D p a n e l i s a d j u s t e d C on t r a s t • G a i n o f R , G , a n d B s i g n a l i s a d j u s t e d . P h a se • T h e p h a s e o f t h e d o t c l o c k i s a d j u s t e d .
L a ngu a g e • S e l e c t t h e l a n g u a g e u s e d f o r t h e O S D m e n u fr o m a m o n g E n g l i s h , F r e n c h , D e u t s c h , S p a n i s h , a nd J a p a n e s e . R eca ll D e f a u l t s • R e s t o r e a l l o r i g i n a l f a c t o r y d e f a u lt s .
C H A P T E R 4 T R O UB L ES H OO T I N G I f y o u a r e e x p e r i e n c i n g t r ou b l e w i t h y ou r t o u c h m on it o r , r e f e r t o t h e f o ll o w i n g t a b l e . I f t h e p r ob l e m p e r s i s t s , p l ea s e c on t a c t y ou r l o ca l d ea l e r o r ou r s e r v i ce ce n t e r .
4 - 40 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i de.
C H A P T E R A N A T I VE R ES O L U T I O N T h e n a ti v e r e s o l u ti o n o f a m on it o r i s t h e r e s o l u ti o n l e v e l a t w h i c h t h e L C D p a n e l i s d e s i g n e d t o p e rf o r m b e s t . F o r t h e E l o L C D t ou c h m on it o r , t h e n a ti v e r e s o l u t i on i s 1024 x 768 f o r t h e 15 .
A s a n e x a m p l e , a S V GA r e s o l u ti on L C D p a n e l h a s 800 p i x e l s ho r i z on t a ll y b y 6 00 p i x e l s v e r ti ca l l y . I n pu t v i d e o i s a l s o r e p r e s e n t e d b y t h e s a m e t e r m s .
C H A P T E R B T O UC H M O N I T O R S A F E T Y T h i s m a n u a l c on t a i n s i n f o r m a ti on t h a t i s i m p o r t a n t f o r t h e p r op e r s e t u p a n d m a i n t e n a n ce o f y o u r t ou c h m on it o r .
C a r e a nd H a nd li ng o f Y ou r T ou c h m on i t o r T h e f o l l o w i n g t i p s w ill h e l p k ee p y o u r E l o E n t u i ti v e t ou c h m on it o r f u n c ti o n i n g a t t h e op ti m a l l e v e l .
C H A P T E R C T E CHN I CA L S PE C I F I CA T I O N S D i s p l a y M od es Y ou r E l o E n t u iti v e t o u c h m on it o r i s c o m p a ti b l e w it h t h e f o ll o w i n g s t a nd a r d v i d e o m od e s : I t e m R e s o l u t i o n T y p e H .
T ou c h m on i t o r S p ec i f i ca t i on s M o d e l E T 15 29 L L C D D i s p l ay 15. 0” T F T A c ti v e M a t r i x P a n e l D i s p l ay S i z e 304.
A cc uTou c h T ou c h s c r ee n S p e c i f i ca t i on s Mec h a n i c a l C o n s t r u c t i o n T op : P o l y e s t e r w i t h ou t s i d e h a r d - s u rf ace c o a ti n g w it h c l ea r o r a n t i g l a r e f i n i s h. I n s i d e : T r a n s p a r e n t c ondu c ti v e c o a ti ng .
I n t e lli Tou c h Tou c h sc r ee n S p ec i f i ca t i on s Mec h a n i c a l P o s i t i o n a l A cc u r a c y S t a n d a r d d e v i a ti on o f e rr o r i s l e ss t h a n 0.
I n f r a r e d Tou c h s c r ee n S p ec i f i ca t i on s Mec h a n i c a l I n p u t Me t h o d I npu t M e t hod F i n g e r o r g l ov e d h a n d a c ti v a ti on E l e c t r i c a l P o s i t i.
15 ” L C D T ou c h m on i t o r ( E T 1529 L - XXX A - 1 - XX - T ) D i m e n s i on s 15 ” L CD T ou c h m on i t o r ( E T 1 529 L - XXX A - 1 - XX ) D i m e n s i on s C - 50 E l o E n t u i t.
R E G U L A T O R Y I N F O R M A T I O N I. E l ec t r i ca l S a f e t y I n f o rm a t i on : A ) C o m p li a n ce i s r e q u i r e d w i t h r e s p ec t t o t h e v o lt a g e , fr e q u e n c y , a n d c u rr e n t r e q u i r e - m e n t s i n d i ca t e d on t h e m a nu f a c t u r e r ’ s l a b e l .
T h i s I n f o r m a ti on T e c h n o l og y E q u i p m e n t (I T E ) i s r e q u i r e d t o h a v e a C E M a r k on t h e m a n u f a c t u r e r ’ s l a b e l w h i c h m ea n s t h a t t h .
53 " T h e a p p l i ca ti o n o f t h i s m on i t o r i s r e s t r i c t e d t o s p ec i a l c o n t r o l l e d l u m i nou s e n v i r o n m e n t s . T h e s c r ee n s u rf a c e t r e nd t o r e f l ec t a n noy i ng l i g h t o f l a m p s a n d s u n l i g h t .
54 E l o E n t u i t i v e T ou c h m on i t o r U s e r G u i de.
W ARR AN T Y E x c e p t a s o t h e r w i s e s t a t e d h e r e i n o r i n a n o r d e r a c k n o w l e d g m e n t d e l i v e r e d t o B u y e r , S e ll e r w a r r a n t s t o B uy e r t h a t t h e P r odu c t s h a ll b e fr ee o f d e f ec t s i n m a t e r i a l s a n d w o r k m a n s h i p .
T H E S E R E M E D I E S S H A L L B E T H E B U Y E R ’ S E X C L U S I V E R E M E D I E S F O R BR E A C H O F W A R R AN T Y . E X C E P T F O R T H E E X P R E S S W A RR AN T Y S E T F O R T .
N u m e r i c s 15 . 0 " L CD T ou c h m on i t o r ( E T 1529L - X X W A - 1 ) Di m en s i on s , 50 A A bou t T ou c h m on i t o r A d j u s t m en t s , 29 A cc u T ou c h T ou c h sc r een S.
N N a t i v e R e s o l u t i on , 41 O O p t i c a l , A cc u T ou c h , 47 O p t i c a l , I n t e lli T ou c h , 48 O p t i c a l , I R , 49 O p t i m i z i ng t he L CD Di s p l a y , 18 O S D C o.
.
USB I NTELLIHEAD FOR SWIPE READERS TEC HNIC A L REFERE NCE MA N U A L Manual P art Number 99875320-1P OCTOBER 20 04 PRELIMIN A R Y REGISTERED TO ISO 9001:2000 20725 South Annalee Avenue Carson, CA 90746 Phone: (310) 631-8602 FA X: ( 310 ) 631 -39 56 Technical Support: (651) 41 5-6800 www.
ii Copyright © 200 4 MagTe k ® , In c. Printe d in the United S t ates of Amer ica Informa tion in this docum ent is subje ct to change w ithout n oti ce. No part of this docum ent m ay be reproduced or transmit ted in any form or b y any means, electronic or mechanical, for an y purpose , without the express w ritten permis sion of MagTek , Inc.
iii Limited Warranty MagTek , Inc . warran ts tha t the Produc t desc ribed in this documen t is f ree o f defect s in material s and workm anship for a period o f one y ear from the date of purch ase w here the d ate of purchase is defined as the date of shipment from MagTek .
iv FCC WAR NIN G STATEM ENT Thi s equ ip ment ha s bee n test e d and fo und t o compl y wit h th e li mits for C las s B digi ta l devi ce, pur suan t to Part 15 of FCC Rule s. These limits are desig ned to pr ovide reasonab le pro tect ion agai nst harmful inte r fere nce when th e equ ipme nt i s op erat ed in a resi den tial envi ro nme nt.
v TABLE OF CO NTENT S SECT IO N 1. FEA TURES A ND SPECIF I CAT I ONS . ..... ........ ...... ...... ..... ......... ..... ...... ..... ........ ...... ...... ..... 1 FEATU RES . ...... ..... ...... ........ ...... ..... ...... ........ ...... ..... ..
vi Figure 1-1. 3-Trac k USB IntelliHead.
1 SECTI ON 1. FEA TURES AND S PECIFICA TIONS The USB (U niversal Seri al Bus) IntelliHead Swipe Reade r is a co mpact m agnetic stripe card reader that conforms to ISO standards. The Reader is compatible with any device with a USB interface. A c ard is r ead b y slidin g it past the h ead eith er forward o r backward.
USB IntelliHead S wipe Reader 2 CONFIGUR ATIONS The Config urations a re as follows: Table 1 -1. C onfigurations ACCESS ORIES The accessories are as follows: Part Number Description 21042806 USB MSR D.
Section 1. F eatures and Specifications 3 SPECIFICAT IONS Table 1-2 lists the spe cifica tions for the USB Int elliHead . Figure 1- 2 shows the dim ensio ns for the standa rd product.
USB IntelliHead S wipe Reader 4.
5 SECTION 2. IN STALLATION This section describes th e cable connection, the Windows Plu g and Play Setup, and the physical mounting of the unit. USB CONNECTI ON Since the USB In telliHea d is supplied as an OEM product, the installation and system integration will be uniq ue for eac h applica tion.
USB IntelliHead S wipe Reader 6.
7 SECTI ON 3. OPE R A TION C AR D R E AD A card may be swiped past the read head at an y time. The magnetic stripe must face towa rd the head and may be swiped in either direction. If there is data encoded on the card, the device will attempt to decode the data and then send the results to the host via a USB HID input report.
USB IntelliHead S wipe Reader 8.
9 SECT ION 4. US B CO MMUN IC ATIO NS This device conforms to the USB specifi cation revisi on 1.1. This device also conforms with the Human Interface Device (H ID) class specificatio n version 1.1. The device communic ates to the host as a vendor-defined HID device.
USB IntelliHead S wipe Reader 10 followin g table. The u sage t ypes are also l isted. T hese usa ge types are d efined i n the HID Usage Tables document.
Section 4. USB Communications 11 Item Val ue (Hex) Input (Data, Variabl e, Absolute, Buffered By t es) 82 02 0 1 Usage (Command message) 09 20 Report Count (24) 95 18 Feature (Dat a, Varia ble, Absolute, Buffered Bytes) B2 02 01 End Collection C0 C AR D D AT A Card dat a is only sent to the host on t he Inte rrupt In pipe using an Input Repor t.
USB IntelliHead S wipe Reader 12 TRACK 1 DEC ODE S TATUS Bits 7-1 0 Value Reserved Error This is a one-b y te valu e, which in dicates the s tatus of decodin g track 1. Bit po sition zero indicat es if there was an error decodi ng track 1 if the bit i s set to one.
Section 4. USB Communications 13 CA RD ENCO DE TY P E This one-b yte value indic ates the t ype of encodin g that was fou nd on the c ard. T he followin g table defines the possibl e valu es. Value Encode T ype Description 0 ISO/ABA ISO/ABA encode format 1 AAMVA AAMVA encode format 2 reserved 3 Blank The card is blank.
USB IntelliHead S wipe Reader 14 COMM ANDS Most ho st applic ations do not ne ed to send commands to the de vice. Most host applica tions only need t o obtai n ca rd da ta fr om the device as describe d previously in this section. T his section of t he manual can b e ignored b y anyone w ho does not need t o send commands to the device.
Section 4. USB Communications 15 RESUL T CODE This one-b yte field cont ai ns the value o f the resul t code. Th ere are two t yp es of result cod es: generic result codes and command-specifi c result codes. Generic r esult cod es alwa ys have the most significant bit set to zero.
USB IntelliHead S wipe Reader 16 Property ID is a one -byte field that contains a valu e that identi fies the property. The foll owing table lists all the current property ID values: Value Propert y I.
Section 4. USB Communications 17 SERIAL_NUM PROPERTY Propert y ID: 1 Property T y pe: String Le ngth: 0 – 15 byt es Get Propert y: Yes Set Propert y: Yes Default Value: The defaul t value is n o strin g with a len gth of zero . Description: The value is an ASCII string that represents the dev ice’s serial number.
USB IntelliHead S wipe Reader 18 rate decreases the USB bus bandwid th used by the device. This propert y is stored in no n-volatile EEPROM memory so it will not c hange w hen the unit is power cycled. The val ue of this propert y, if an y, will be sent to the host when the host requests th e device’s U SB endpoi nt desc riptor.
Section 4. USB Communications 19 01 02 03 08 Example Set MAX_PACKET_ SIZE propert y Response (Hex): Result Code Data Len Data 00 00 Example Get MAX_PAC KET_SIZE pr operty Req uest (Hex ): Cmd Num Data.
USB IntelliHead S wipe Reader 20 Result Code Data L e n Prp Value 00 01 00.
21 SECTI ON 5. D EMO PRO GRAM The demo progra m, which i s wri tten i n Visua l Basic, ca n be us ed to do the follow ing : • Read cards from the d evice and vi ew the c ard data • Send co mma nd .
USB IntelliHead S wipe Reader 22 SOURC E COD E Source code is i ncluded with the dem o prog r am. I t c an be used as a gu ide for appli cation devel opment.
23 A P PENDIX A . USB INTE LLIHEAD SW IPE REA DER The f ollowing d rawi ng is provid ed in th is secti on: Part Number Title 2103000 6 USB-HID INTHD 3TK 125MM WRE, 5P CONN.
USB Intell iHead Swipe Reader 24 Figure A-1. USB HID IntelliHead, 3-Track, 125mm Wire, 5-Pin Connecto r.
Preliminar y t o Rev 1 10/20/2004 7:30:02 A M USB I NTELLIHEAD KE Y BOA RD E M UL AT I O N FOR SWIPE READERS TEC HNIC A L REFERE NCE MA N U A L Manual P art Number 99875321-1P OCTOBER 20 04 PRELIMIN A.
ii Cop yri ght © 2004 MagTe k ® , In c. Printe d in the United S t ates of Amer ica Informa tion in this docum ent is subje ct to change w ithout n oti ce.
iii Limited Warranty M agTek , Inc. w arrants tha t the Produc t described in this docum ent is free of defect s i n materials and workm anship for a period o f one y ear from the date of purch ase w here the d ate of purchase is defined as the date of shipment from MagTek .
iv FCC WAR NIN G STATEM ENT T his equ ip ment ha s bee n test e d and fo und t o compl y wit h th e li mits for C las s B digi ta l devi ce, pur suan t to Part 15 of FCC Rule s. These limits are desig ned to pr ovide reasonab le pro tect ion agai nst harmful inte r fere nce when th e equ ipme nt i s op erat ed in a resi den tial envi ro nme nt.
v TABLE OF CO NTENT S SECT IO N 1. FEA TURES A ND SPECIF I CAT I ONS . ..... ........ ...... ...... ..... ......... ..... ...... ..... ........ ...... ...... ..... 1 FEATU RES . ...... ..... ...... ........ ...... ..... ...... ........ ...... ..... ..
vi Figure 1-1. 3-Trac k USB Keyboard E mulation Intelli Head.
1 SECTI ON 1. FEA TURES AND S PECIFICA TIONS The USB (U niversal Seri al Bus) , HID Ke y board Emulation , Swipe Reade r i s a compact magnetic s tripe card re ader, wh ich confo rms to ISO stan dards. The R eader is compatible with the PC series of personal computers and emulates the operation of a keyboard.
USB HID Keyboard Emulation Swipe Reader 2 The hardwa re configura t ions a re show n in Table 1- 1. Table 1 -1. C onfigurations ACCESS ORIES The accessories are as follows: Part Number Descripti on 21.
Section 1. F eatures and Specifications 3 SPECIFICAT IONS Table 1-2 lists the spe cifica tions for the USB Int elliHead . Figure 1- 2 shows the dim ensio ns for the stand ard product.
USB HID Keyboard Emulation Swipe Reader 4.
5 SECTION 2. IN STALLATION This section describes th e cable connection, the Windows Plu g and Play Setup, and the physical mounting of the unit. USB CONNECTI ON Since the USB In telliHea d is supplied as an OEM product, the installation and system integration will be uniq ue for eac h applica tion.
USB HID Keyboard Emulation Swipe Reader 6.
7 SECTI ON 3. OPE R A TION C AR D R E AD A card may be swiped past the read head at an y time. The magnetic stripe must face towa rd the head and may be swiped in either direction. If there is data encoded on the card, the device will attempt to decode the data and then send the results to the host via a USB HID input report.
USB HID Keyboard Emulation Swipe Reader 8.
9 SECT ION 4. US B CO MMUN IC ATIO NS This device conforms to the USB specifi cation revisi on 1.1. This device also conforms with the Human Interface Device (H ID) class specificatio n version 1.1. The device communic ates to the host as a H ID ke yboard devi ce.
USB HID Keyboard Emulation Swipe Reader 10 MSR ( Non-Key boar d Emul ation Versio n). Pl ease refe r to Techn ical Ma n ual 99875 320 for further information regardin g the USB IntelliHead HID reader. The device’s programm able confi guration opti ons affect th e format of the card data.
Section 4. USB Communications 11 PROGR A MM A BLE C ONFIGUR ATION OP TIONS This device h as a numb er o f programmable confi guration properti es. Th ese pro perties a re stored in non-vol atile EEPROM mem ory. These properties ca n be config ured at the fa ctory or by the end user usin g a prog ram supplied by MagTek.
USB HID Keyboard Emulation Swipe Reader 12 REPOR T DESCRIP TOR The HID report desc ripto r i s stru ctured as fo llows : Item Val ue(Hex) Usage Page (Generic Desktop) 05 01 Usage (Keyboard) 09 06 Coll.
Section 4. USB Communications 13 COMM ANDS Comman d r equests a nd re sponses are sent to and receive d from the d evice using feature report s. Command requ ests are s ent to the d evice usin g the H ID class sp ecific requ est Set_Report .
USB HID Keyboard Emulation Swipe Reader 14 RESUL T CODE This one-b yte field cont ai ns the value o f the resul t code. Th ere are two t yp es of result cod es: generic result codes and command-specifi c result codes. Generic r esult cod es alwa ys have the most significant bit set to zero.
Section 4. USB Communications 15 Property ID is a one -byte field that contains a valu e that identi fies the property. The foll owing table lists all the current property ID values: Value Prop ert y .
USB HID Keyboard Emulation Swipe Reader 16 SERIAL_NUM PROPERTY Propert y ID: 1 Property T y pe: String Le ngth: 0 – 15 byt es Get Propert y: Yes Set Propert y: Yes Default Value: The defaul t value is n o strin g with a len gth of zero . Description: The value is an ASCII string that represents the dev ice’s serial number.
Section 4. USB Communications 17 bus bandwidt h used b y the device, and slo wing down t he card d ata tr ansfer rate decreases the USB bus bandwid th used by the device. This propert y is stored in no n-volatile EEPROM memory so it will not c hange w hen the unit is power cycled.
USB HID Keyboard Emulation Swipe Reader 18 TRACK_DATA_ SEND_FLAGS PROPERTY Propert y ID: 4 Propert y T ype: Byte L eng th: 1 by te Get Propert y: Yes Set Propert y: Yes Default Value: 63 (hex ) Descri.
Section 4. USB Communications 19 TERMI NATION_CH AR PROPERTY Propert y ID: 5 Propert y T ype: Byte L eng th: 1 by te Get Propert y: Yes Set Propert y: Yes Default Va lue : 0D (h ex) (c arria ge retu r.
USB HID Keyboard Emulation Swipe Reader 20 SS_TK3_ISO_A BA PROPERTY Propert y ID: 8 Propert y T ype: Byte L eng th: 1 by te Get Propert y: Yes Set Propert y: Yes Default Value: 2B (hex) ‘+’ Description: This character is sent as t he trac k 3 start sentinel for cards that h ave track 3 encoded in ISO/ABA f or mat.
Section 4. USB Communications 21 This propert y is st ored in non -volatile EEPRO M memor y so it will not chan ge when th e unit i s power cycled. When this propert y is changed, the u nit must be power cycled to have these changes tak e effect. If a valu e other than t he defa ult val ue is desired , it can be set b y the facto ry upon requ est.
USB HID Keyboard Emulation Swipe Reader 22 PRE_TK_CHAR PROPERTY Propert y ID: 13 (0D hex) Propert y T ype: Byte Len g th : 1 b yte Get Propert y: Yes Set Propert y: Yes Default Value: 0 Description: This character is s ent pri or to the d ata for ea ch track.
Section 4. USB Communications 23 accord in g to a U nit ed S ta tes ke yboar d k e ymap. For ex ampl e, t o tr ans mit the ASCII character ‘?’ (063 decimal), the character is looked up in a ke ymap.
USB HID Keyboard Emulation Swipe Reader 24 Description: The valu e is a b yte that represents th e devi ces interface t y pe. The v alue can be set to 0 fo r the HID inter f ace or to 1 for the keyboa rd emula tion inter face. When the value is set to 0 (HID) the device will behave as described in the HID man ual .
25 SECTI ON 5. D EMO PRO GRAM The purp ose of this demo program is not to dem onstrate card readi ng with this HI D ke yboard emulation device. Use a tex t editor application such as Windows Notepad to demonstrat e card read ing fo r this H ID keyb oard emulati on de vice.
USB HID Keyboard Emulation Swipe Reader 26 • Enter a command in the Message edit box. All data entered should be in hexadecimal bytes with a space between each b y te. Enter the command number followed by the command data if there is any. The appli cation will automatic ally calculate and send the com mand data leng t h for yo u.
27 A P PENDIX A . USB INTE LLIHEAD SW IPE REA DER The f ollowing d rawi ng is provid ed in th is secti on: Part Number Title 2103000 7 USB- KB INTHD 3TK 1 25MM WRE, 5P C ONN.
USB HID K eyboard Emulation Swi pe Reader 28 Figure A-1. U SB Keyboard Emulation, Fo r Swipe Readers, 125mm Wire, 5-Pin Connector.
INSTALLATION GUIDE LD9000U series User Manual available at our web site www.logicc ontrols.com USB Interface Customer Pole Displays LD9000U, LD9200U, LD9 300U, LD9400U, LD9500U, LD9900 U, LD9000XU, LD.
Logic Controls, Inc. SOFTWARE COMMANDS Logic Controls pol e displays ar e controlled by command codes and data from the compu ter. Commands are transmitted to the pole display as ASCII codes.
i Customer Displays 2 by 20 character display USER MANUAL Models: LD9000 Series.
ii NOTICE The manufacturer of the POS pole display makes no representations or warranties, either expressed or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties of fitness for a particular purpose or for any indirect, special or consequential damages.
iii TABLE OF CONTENTS FEATURES ..................................................................................... 1 MODEL IDENTIFICATION ............................................................ 2 CARTON CONTENTS ................................
1 FEATURES The LD9000 family of pole displays offers a wide range of high quality features and models to choice from. Listed below are the features incorporated into each pole display. Not all features are available in all models. The model identification chart will assist you in selecting the model best suited to your needs.
2 MODEL IDENTIFICATION LD9 __ __ __ - __ __ X = Double Sided Display PT = Pass Thru 25 = DB25F connector to computer POWER ADAPTER 0 = 120VAC* COMMAND SET 1 = 220VAC 0 = LOGIC CONTROLS* 1 = LOGIC CONT.
3 INSTALLATION Your PD9000 family of pole displays has been pre-assembled to make the installation as simple as possible. Serial Interface Non-pass-thru Models Installation 1. Mount the pole display to the metal base plate using the mounting hardware provided.
4 Serial Interface Pass-thru Models Installation 1 Mount the pole display to the metal base plate using the mounting hardware provided. 2 The pole display can be used in a freestanding mode or attached to the counter using the remaining mounting hardware.
5 FUNCTIONAL TEST The following test sequence will verify that your pole display is working properly. Before you start this procedure, you must install the pole display correctly as outlined under the INSTALLATION section.
6 LD9100-PT, LD9300-PT, LD9400-PT and LD9500-PT 1. Type “ABCDEFGH” and press ENTER key. The display will show “ABCDEFGH” on the first line. 2. Type “ ^A PASSTHRU” ( ^A is entered as Ctrl-A ) and press ENTER key. The data will be passed through to the peripheral (e.
7 LD9190-PT, LD9390-PT, LD9490-PT and LD9590-PT 1. Type “ECHO ABCDEFGH>LPT1” and press ENTER key. The display will show “ABCDEFGH” on the first line. 2. Type “ECHO ^A PASSTHRU>LPT1” ( ^A is entered as Ctrl-A) and press ENTER key. The data will be passed through to the peripheral (e.
8 INTERFACE CONNECTION Serial Interface Connector Configuration The pin out configuration for the standard serial pole display is a DB9F connector. It plugs directly into the serial port of the computer. 1. DCD (tied to pins 4&6) 2. NC 3. TXD from PC 4.
9 Parallel Interface Connector Configuration All standard parallel pole displays will have a DB25 male connector. It is connected to the printer port of the computer. 1. –Strobe 2. Data 0 3. Data 1 4. Data 2 5. Data 3 6. Data 4 7. Data 5 8. Data 6 9.
10 SOFTWARE COMMANDS Logic Controls pole displays are controlled by command codes and data from the computer. The model of pole display that you have will determine which command set works with your pole. Refer to the model identification chart for further information.
11 7. Carriage R eturn <0D>, (13), {^M}: The cursor moves to the left most digit of the row it is in. 8. Digit Select <10>, (16), {^P}: Moves the cursor to any position on the display with this command followed by a data byte of <00> to <27>, or in decimal (00) to (39).
12 17. Both Side Display <1B><0C>, (27)(12), {^[ ]{^L}: After this command, all messages followed are displayed on both sides of double sided displays. 18. Front Sid e Display <1B><0E>, (27)(14), {^[ ]{^N}: After this command, all messages followed are displayed only on front side of double sided displays.
13 PASS-THRU COMMAND SET (LD9100-PT, LD9100X-PT): All software commands of the non-pass-thru single sided model are available with following additional commands for pass-thru and double-sided display control. When power is turned on or after a reset command has been initiated, all text is displayed on the pole display.
14 HARDWARE CONFIGURATION Serial pole displays were factory configured for serial RS232C interface using the following protocol: · 9600 Baud Rate · 8 Data Bits · 1 Stop Bit · No Parity Other optional baud rates are available with factory settings.
15 DISPLAY CHARACTER CODES D7 0 0 0 0 0 0 0 0 D6 0 0 0 0 1 1 1 1 D5 0 0 1 1 0 0 1 1 D4 0 1 0 1 0 1 0 1 D 3 D 2 D 1 D 0 0 1 2 3 4 5 6 7 0000 0 DP SP 0 @ P ‘ p 0001 1 DC 1 ! 1 A Q a q 0010 2 DC 2 &quo.
16 GENERAL SPECIFICATIONS LD9000 LD900X OPTICAL: Number of rows 2 2 x 2 sides Number of digits/row 20 20 Dot matrix 5 x 7 5 x 7 Digit height) 0.374in. (9.
SecuGen _______________________________________________________ Products -1 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 General Description FDU02 .
SecuGen _______________________________________________________ Products -2 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Theory of Operation The USB host initiates the communication with the FDU02 using operation commands.
SecuGen _______________________________________________________ Products -3 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 ♦ Support s both fingerp.
SecuGen _______________________________________________________ Products -4 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Connector Pin Description .
SecuGen _______________________________________________________ Products -5 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Outline Dimension ♦ FDU0.
SecuGen _______________________________________________________ Products -6 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 OPP02M PCB Dimensions.
SecuGen _______________________________________________________ Products -7 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Mechanical Dimensions(OPP02 M) Optical Specification Hardness of prism surface 750Hk Resolution 500 ± 10 P PI Effective Sensing Area 1 2.
SecuGen _______________________________________________________ Products -8 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Mounting ♦ Cable connect.
SecuGen _______________________________________________________ Products -9 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 ♦ Mouse C onnection (Bet.
SecuGen _______________________________________________________ Products -1 0 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Application ♦ SecuGen Hamster III (HFDU02A) SecuGen Hamster I I I i s the name of SecuGen’s fingerprint recognition PC peripheral device that uses the FDU02.
An important point after buying a device Elo TouchSystems ET1529L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Elo TouchSystems ET1529L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Elo TouchSystems ET1529L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Elo TouchSystems ET1529L you will learn all the available features of the product, as well as information on its operation. The information that you get Elo TouchSystems ET1529L will certainly help you make a decision on the purchase.
If you already are a holder of Elo TouchSystems ET1529L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Elo TouchSystems ET1529L.
However, one of the most important roles played by the user manual is to help in solving problems with Elo TouchSystems ET1529L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Elo TouchSystems ET1529L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
