Instruction/ maintenance manual of the product 1517L iTouch Elo TouchSystems
Go to page of 27
USER MANUAL Elo T ouch Solutions 1517L and 1717L T ouchmonitors SW601708 Rev A.
User Manual: 1517L, 1717L SW601708 Rev A, Page 2 of 27 Copyright © 2012 Elo T ouch Solutions, Inc. All Rights Reserv ed. No part of this publication may be rep r oduced, transmitted, transcribed, sto.
User Manual: 1517L, 1717L SW601708 Rev A, Page 3 of 27 T able of Content s Chapter 1: Introduction ...........................................................................................4 Chapter 2: Inst allation ..................................
User Manual: 1517L, 1717L SW601708 Rev A, Page 4 of 27 Chapter 1: Introduction Product Description Y our new touchmonitor combines the reliable performance of Elo T ouch Solutions touch products with the latest developments in touch technology and display design.
User Manual: 1517L, 1717L SW601708 Rev A, Page 5 of 27 Chapter 2: Inst allation Unp acking the T ouchmonitor Open the carton and verify that the following items are present: T ouchmonitor with pro.
Connector Panel & Interfaces T ouchmonitor Connections 1. Connect the VGA video cables between the m onitor ’ s VGA input connectors and your VGA video source, respectively . T ighten the video cable’s screws for best performance. 2. Connect the USB touch cable between the m onitor ’s USB connector and your PC’ s USB port.
Inst alling the T ouch T echnology Sof tware Drivers Some software inst allation is required for your touchmonitor to work with your computer . The drivers for the Windows 7, XP , V ista, W e POS, and 32-bit Server 2003 and 2008 operating systems are provided with y our touchmonitor on a CD.
For Windows XP , V ista, Server 2003, Server 2008, and WEPOS installations, inst all the “USB T ouchscreen Driver s” when prompted: User Manual: 1517L, 1717L SW601708 Rev A, Page 8 of 27.
For Windows 7 installations, check the “Inst all dr iver” box under “Elo USB Interfaces – Other T ouchscreens” After accepting the end-user license agree ment, the drivers will finish installing. Reboot your computer after the inst all is complete.
Chapter 3: Mounting General Mounting Information The OSD text can be rotated through the OSD menu to better suit your mounting orientation. Rear VESA Mount For the 15 inch touchmonitor , a four-hole 75x 75mm mounting pattern for M4 screws is provided on the rear of the monitor .
For the 17 inch touchmonitor , a four-hole 75x 75mm mounting pattern for M4 screws is provided on the rear of the monitor . Remove the stand using a Phillip s screwdriver to access this mounting interface. The VESA FDMI-compliant counting is coded: VESA MIS-B, 75, C.
Base Mount For the 15 inch touchmonitor , a threaded three-hol e mounting pattern for M4 screws is provided on the bottom of stand base fo r mounting or securing.
For the 17 inch touchmonitor , a threaded three-hol e mounting pattern for M4 screws is provided on the bottom of stand base fo r mounting or securing.
User Manual: 1517L, 1717L SW601708 Rev A, Page 14 of 27 Chapter 4: Operation Power T o turn the touchmonitor on or off, pr ess the touchmonitor power button once.
V ideo A display’s native resolution is its wid th and height measured in number of pixels. Generally , for best performance, an image displayed on this moni tor will look best when your computer ’s output resolution matches this monitor ’s native re solution, which is 1024 x 768 for the 15 inch, and 1280 x 1024 for the 17 inch.
User Manual: 1517L, 1717L SW601708 Rev A, Page 16 of 27 Using the OSD buttons controls an on-screen graphica l user interface which displays on top of your input video, allowing intuitive adjustm ent of the following display parameters: Parameter A vailable Adjustment Brightness Increase/decrease monitor brightness.
User Manual: 1517L, 1717L SW601708 Rev A, Page 17 of 27 All touchmonitor adjustments made through the OSD are automatically memorized as soon as they are entered. This feature saves you from having to reset your choices every time the touchmonitor is unplugged or powered off and on.
User Manual: 1517L, 1717L SW601708 Rev A, Page 18 of 27 Chapter 5: T echnical Support If you are experiencing trouble with your touc hmonitor , refer to the following suggestions. If the problem persists, please cont act your local dealer or contact Elo T ouch Solutions Customer Service.
User Manual: 1517L, 1717L SW601708 Rev A, Page 19 of 27 T echnical Assist ance V isit www .elotouch.com/products for tec hnical specifications for this device V isit www .elotouch.com/go/webs upport for online self-help. V isit www .elotouch.com/go/contactsupport for technical support.
Chapter 6: Safety & Maintenance Safety T o avoid risk of electric shock, follow a ll safety notices and do not disassemble the touchmonitor . They are not user-serviceable. Ensure that your installation is equipped to ma intain the specified environment al conditions listed in the T echnical S pecifications chapter .
W aste Electrical & Electronic Equipment Directive (WEEE) This product should not be disposed of with household waste. It should be deposited at a facility that enabl es recovery and recycling.
User Manual: 1517L, 1717L SW601708 Rev A, Page 22 of 27 Chapter 7: Regulatory Information I. Electrical Safety Information: Compliance is required with respect to the voltage, frequency , and current requirements indicated on the manufacturer ’s label.
User Manual: 1517L, 1717L SW601708 Rev A, Page 23 of 27 as required by EMC Directive 2004/108/EC as indi cated in European S tandard EN 55022 Class B and the Low V oltage Directive 2006/95/EC as indicated in European S tandard EN 60950. General Information to all Users: This equi pment generates, uses and can radiate radio frequency energy .
User Manual: 1517L, 1717L SW601708 Rev A, Page 24 of 27 III. Agency Certifications The following certifications and marks have been issued or declared for this monitor: Australia C-T ick Canada CUL, IC China CCC Europe CE Japan VCCI Korea KCC Mexico CoC T aiwa n BSMI United S tates FCC, UL IV .
Explanation of Markings (1). In accordance with the SJ/T1 1364-2006 requi rement, the electronic information products are marked with the following pollution control logo.
User Manual: 1517L, 1717L SW601708 Rev A, Page 26 of 27 Chapter 8: W arranty Information Except as otherwise stated herein, or in an order acknowledgment delivered to Buyer , Seller warrants to Buyer that the Product shall be free of defect s in materials and workmanship.
User Manual: 1517L, 1717L SW601708 Rev A, Page 27 of 27 Check out Our W ebsite! www .elotouch.com Get the latest... Product Information S pec ifications News on upcoming events Press r.
An important point after buying a device Elo TouchSystems 1517L iTouch (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Elo TouchSystems 1517L iTouch yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Elo TouchSystems 1517L iTouch - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Elo TouchSystems 1517L iTouch you will learn all the available features of the product, as well as information on its operation. The information that you get Elo TouchSystems 1517L iTouch will certainly help you make a decision on the purchase.
If you already are a holder of Elo TouchSystems 1517L iTouch, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Elo TouchSystems 1517L iTouch.
However, one of the most important roles played by the user manual is to help in solving problems with Elo TouchSystems 1517L iTouch. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Elo TouchSystems 1517L iTouch along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center