Instruction/ maintenance manual of the product HV-100XG Elmo
Go to page of 16
HV -100XG INSTRUCTION MANUAL VISUAL PRESENTER Please read this instruction manual carefully before using this Visual Presenter and keep it for future reference.
- 1 - IMPORT ANT SAFEGUARDS Read Instructions – All the safety and operating instructions should be read before the appliance is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
- 2 - Grounding or Polarization – This product may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. The 2-wire polarized plug will fit into the power outlet only one way.
- 3 - Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power-supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the product.
- 4 - The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
- 5 - BEFORE YOU USE Use the Visual Presenter under the rated electrical conditions. Do not leave the Presenter under direct sunlight or by heaters, or the Presenter may be discolored, deformed, or damaged. Do not place the Presenter in any humid, dusty, windy or vibrating location.
- 6 - CONTENTS IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 BEFORE YOU USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1. PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . .
- 7 - Camera Head 1 Arm 2 Base Unit 3 Main Stage 4 Auxiliary Stage 5 Lamp Switch [LAMP] 7 Image Input Selection Switch [INPUT] 8 Power Switch [POWER] 9 Power Terminal [DC IN 12V] 10 AC Adapter 13 Analog RGB Cable 12 Accessory Case 11 Lamp 6 1.
- 8 - Name Camera Head Arm Base Unit Main Stage Auxiliary Stage Lamp Lamp Switch [LAMP] Image Input Selection Switch [INPUT] Power Switch [POWER] Power Terminal [DC IN 12V] Accessory Case Analog RGB Cable AC Adapter Function Moving up/down the camera head can change the size of an object in display on the monitor screen smoothly.
- 9 - Zoom Lamp 15 Digital Zoom Button [DIGITAL ZOOM] 14 Gain Button [GAIN] 16 Auto White Balance Switch [AWB] 17 Auto Electronic Shutter Switch [AES] 18 Gamma Value Selection Switch [ ] 19 RGB-in Terminal [RGB INPUT] 20 RGB-out Terminal [RGB OUTPUT] 21 -Normally ON -Normally ON -[NORM.
- 10 - Name Digital Zoom Button [DIGITAL ZOOM] Zoom Lamp Gain Button [GAIN] Auto White Balance Switch [AWB] Auto Electronic Shutter Switch [AES] Gamma Value Selection Switch [ ] RGB-in Terminal [RGB INPUT] RGB-out Terminal [RGB OUTPUT] Function To operate digital zoom.
- 11 - 2-1 SETTING UP OPEN OPEN ST AGE ST AGE OPEN OPEN ST AGE ST AGE <Accessory case> AC adaptor Analog RGB cable 2. SETTING UP AND ST ORING Latch parts Make sure that the power switch [POWER] is OFF, and then remove all cords connected to the Presenter.
- 12 - Note: - Analog NTSC or S-Video monitors can not be used. - A monitor or projector having a resolution of 1024x768 is recommended. Example of connection To power outlet To the RGB-in terminal of.
- 13 - • Is the analog RGB cable connected properly? • Is the AC adapter inserted correctly? • Is the DC jack inserted firmly in the power terminal [DC IN 12V] of the Presenter? • Is the power switch [POWER] ON? • Is the image-in selection switch [INPUT] set at [RGB IN] ? Symptom No image is on the monitor or project.
- 14 - General Power voltage 12VDC Power consumption 9VA Outside dimensions <Unfolded> 361mm(W)x282mm(D)x161-284mm(H) (14.2in.(W)x11.1in.(D)x6.3-11.2in.(H)) <Folded> 59mm(W)x282mm(D)x161mm(H) (2.3in.(W)x11.1in.(D)x6.3in.(H)) Mass 1.5kg (3.
W ARNING: Unauthorized recording of copyrighted slide films, materials, photographs, etc. may infringe on the rights of copyright owners and be contrary to copyright laws. ELMO CO., L TD. 6-14, Meizen-cho, Mizuho-ku, Nagoya, 467-8567, Japan OVERSEAS SUBSIDIARY COMPANIES U.
An important point after buying a device Elmo HV-100XG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Elmo HV-100XG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Elmo HV-100XG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Elmo HV-100XG you will learn all the available features of the product, as well as information on its operation. The information that you get Elmo HV-100XG will certainly help you make a decision on the purchase.
If you already are a holder of Elmo HV-100XG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Elmo HV-100XG.
However, one of the most important roles played by the user manual is to help in solving problems with Elmo HV-100XG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Elmo HV-100XG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
