Instruction/ maintenance manual of the product BAS 500 WNB Elektra Beckum
Go to page of 7
115 168 8051 / 3602 - 1.0 de, en Achtung! Lesen Sie diese Anleitung vor der Installation und Inbetriebnahme aufmerksam durch. Attention! Carefully read through these instructions prior to installation and commissioning.
.
7 ENG GENERAL SAFETY INFORMATION As with all power tools there is a certain amount of hazard involved with the operator and his use of the machine. Using the machine with the respect and caution demanded as far as safety precautions are concerned will considerably lessen the possibility of personal injury.
8 function which results from improper use or unauthorized modification from standard specifications, faulty maintenance, damage or improper repair by anyone other than qualified persons approved by Elektra Beckum or its representatives.
9 5 Band Saw Setup Blade Speed Change To change the cutting speed, the V-belts must be changed on the pulleys as shown in the table inside the lower wheel housing door. For an easy belt change a quick-action tensioning device is provided, actuated by the handwheel (20) at the lower right hand side of the wheel housing.
10 Saw Table Tilt - For bevel cuts the table can be tilted up to 45 ° . Loosen the wing nut (135) of the table trunnion assembly, tilt the table to the required position and retighten the wing nut. Make trial cut in a piece of scrap wood to verify setting to desired angle.
11 Blade for NF-metals 3380x15x0.5 mm tooth spacing A 2 mm Stock-no. 090 902 9210 Blade for carbon steel 3380x13x0.65 mm tooth spacing 14 teeth/inch Stock-no. 090 902 9229 Blade for cutting fire wood 3380x25x0.6 mm tooth spacing A 8 mm Stock-no. 090 900 0424 General purpose blade for straight and contour cuts, 3380x15x0.
An important point after buying a device Elektra Beckum BAS 500 WNB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Elektra Beckum BAS 500 WNB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Elektra Beckum BAS 500 WNB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Elektra Beckum BAS 500 WNB you will learn all the available features of the product, as well as information on its operation. The information that you get Elektra Beckum BAS 500 WNB will certainly help you make a decision on the purchase.
If you already are a holder of Elektra Beckum BAS 500 WNB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Elektra Beckum BAS 500 WNB.
However, one of the most important roles played by the user manual is to help in solving problems with Elektra Beckum BAS 500 WNB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Elektra Beckum BAS 500 WNB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
