Instruction/ maintenance manual of the product Z2950 Series Electrolux
Go to page of 12
Upright V acuum Cleaner Owner’ s Guide Household T ype Z2950 Series IMPOR T ANT For any advice on your cleaner and to order filters and accessories, please telephone the Electrolux Helpline on 08706 055055 FIL TER REPLACEMENT CODE: EF87a and EF82 www .
2 IMPOR T ANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, inc luding the following: READ ALL INSTRUCTIONS BEFORE USING THIS V ACUUM CLEANER. W ARNING T o reduce the risk of fire, electric shock, or injury: • Do not use outdoors or on wet surfaces.
3 BEFORE Y OU ST AR T CHECK THE VOL T AGE Before connecting the cleaner to an electrical supply , ensure that the voltage shown on the ra ting plate located beneath the cleaner is of the correct voltage for your electricity supply . If it is not, do not use the cleaner but refer back to your dealer .
4 SERVICE Should you require service on your Electrolux cleaner , please telephone Electrolux Customer Services on 08706 055055. Before requesting ser vice, please check whether your problem is covered under Service Checklist (see belo w). New filter pads, brushrolls and drive belts can be obtained from Electrolux Retailers.
5 P ARTS LIST (FIG. 1) ● A Wand and crevice wand (pull apart) ● B Dusting brush ● C Hose ● D Vacuum c leaner body ● E Electrical cord ● F Handle ● G Self-cleaning duster (some models onl.
6 FIG. 20 HOW TO USE WARNING: A void injur y . Keep loose clothing, hair , fingers, and all other parts of body away from any mo ving part (such as the revolving brush). T urn off the switch and unplug the cleaner before changing the c leaner height setting.
7 (CONTINUED) ROUTINE MAINTENANCE Note: T urn off the switch and unplug the electrical cord before routine maintenance. Never operate the vacuum cleaner without the top and bottom filters in place.
8 FIG. 19 FIG. 20 ROUTINE MAINTENANCE (continued) Filter Screen The filter screen is located directly above the dust cup and is easily removed by turning it counter -clockwise. It should be checked regularly to ensure an open airway . Reinsert the screen by turning it clockwise (FIG.
9 PERIODIC MAINTENANCE (continued) How T o Replace Brushroll Belt Step 1: Lower handle to floor to change belt (FIG. 21). Step 2: Remove the two screws from the top of the hood (FIG. 22). Step 3: Lift hood to remove (FIG. 23). Step 4: Lift right end of brushroll (FIG.
10 FIG. 20 PROBLEM SOL VING How to Clear Blockages in Hose CAUTION: T urn off the switch and unplug the electrical cord before periodic maintenance. Step 1: Firmly pull the end of the hose from the hose retainer on the hood of the vacuum (FIG. 26). Step 2: Check for blockages in the hose and hose retainer .
11 PROBLEM SOL VING CAUTION: T urn off the switch and unplug the electrical cord before ser vicing. Problem Cause Solution Motor will not start Electric Plug • Push plug securely into outlet • T r.
Part No. 77828 (06/06) Printed in PRC If you experience any problems with your c leaner , don’t struggle taking it back to the shop . Call our dedicated Customer Helpline for help and advice on 08706 055055 Accessor y Items in This Carton Thank you for purchasing an Electrolux c leaner .
An important point after buying a device Electrolux Z2950 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux Z2950 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux Z2950 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux Z2950 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux Z2950 Series will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux Z2950 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux Z2950 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux Z2950 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux Z2950 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
