Instruction/ maintenance manual of the product Wine Cooler Electrolux
Go to page of 7
Inst allation INST ALLING THE WINE COOLER Y our Electrolux wine cooler has been designed for either free-st anding or built-in installation(refer to the Built-in Installation section of this manual for instructions). In either case, the front grille must NOT be obstructed.
Site Prep aration 5 Position the unit to allow free air flow through the front grille (see Figure 3 ). 6 Wipe out inside of unit with a damp cloth. 7 Final finish of the wooden wine rack trim must be applied at least 24 hours before re- installing the wooden rack trim into the cabinet.
W ood T rim WINE RACKS WITH WOOD TRIM Y our Electrolux wine cooler is equipped with a natural wood trim on the wine racks for appearance and durability . The wood trim has been coated at the factory with a clear vinyl sealer , which will adequately protect the wood in normal usage.
W ood T rim T o stain for a dif ferent wood color: 1 Remove five racks with wood trim from unit, see Rack Removal/ Installation . 2 Remove screws securing wood trim to racks. 3 Apply Minwax W ater-Based W ood S tain® to wood with a synthetic foam brush.
Leveling LEVELING THE UNIT Position the unit on a flat, level surface, capable of supporting the entire weight of the unit when full. This unit contains four adjust able leveling legs. T urn the legs clockwise to raise and counterclockwise to lower (see Figures 4 and 5 ).
UL308 PLASTIC PLUGS Figure 6 Figure 7 Figure 8 Door Reversal REVERSING THE DOOR All Electrolux wine cooler models are field reversible for left or right hand opening. The door opening is easily reversed by moving the hinge hardware to the opposite side (see Figure 6 ).
Door Reversal 3 Remove top hinge (3 screws), reinstall hinge screw pin, and remount on opposite side BOTTOM (see Figure 10 ). 4 Remove the two door closer plastic inserts from the existing bottom hinge and install as shown on the new bottom hinge (see Figure 1 1 ).
An important point after buying a device Electrolux Wine Cooler (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux Wine Cooler yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux Wine Cooler - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux Wine Cooler you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux Wine Cooler will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux Wine Cooler, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux Wine Cooler.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux Wine Cooler. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux Wine Cooler along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
