Instruction/ maintenance manual of the product SDS51400S0 Electrolux
Go to page of 24
SDS51400S0 EN FRIDGE-FREEZER USER MANUAL.
FOR PERFECT RE SULTS Thank you for choosing th is AEG product. We have created it to give you impeccable performance for many years, with innovative techno logies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minute s reading to get the very best from it.
CONTENTS 4 Safety information 6 Operation 7F i r s t u s e 7D a i l y u s e 8 Helpful hints and tips 9 Care and cleaning 11 What to do if… 13 Technical data 13 Installation 20 Environmental concerns.
SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings.
• It is dang erous to alter the specifications or modify this product in any way. Any dam - age to the cord may cause a short-ci rcuit, fire and/or electric sh ock. WARNING! Any electrical component (power cord, plug, co mpressor) must be replaced by a certified service agent or qualified service personnel.
• Adequate air circulation should be around th e appliance, lacking this leads to overheat - ing. To achieve sufficient ventilation follow the instructions relevant to installation. • Wherever possible th e back of the product should be against a wall to avoid touching or catching warm parts ( compressor, condenser) to prevent possible burn.
• the location of the appliance. If the ambient temperature is high or the ap pliance is fully loaded, and the appliance is set to the lowest temperatures, it may run continuously causing frost to form on the rear wall.
The numbers indicate storage times in months for the appropriate types of fro zen goods. Whether the upper or lower value of the indi cated storage time is valid depends on the quality of the foods and tr eating before freezing. Ice-cube production This appliance is equipped wi th one or more trays for the pr oduction of ice-cubes.
• only freeze top quality, fresh and thoroughly cleaned, foodstuffs; • prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw .
Take care of not to damage the coolin g system. Many proprietary kitchen surface cleaners co ntain chemicals that ca n attack/damage the plastics used in this appliance. For this reason it is recommended th at the outer casing of this appliance is only cleaned with warm water with a little washing-up liquid added.
4. When defrosting is co mpleted, dry the interior thoroughly. 5. Switch on the appliance. 6. After two or three hours, reload the previously removed food into the compartment. Never use sharp metal tools to scrape off frost from the evaporator as you could damage it.
Problem Possible cause Solution The door is not closed correctl y. Refer to "Closing the door". The door has been opened too frequently. Do not keep the door open lon - ger than necessary. The product temperature is too high. Let the product temperature de - crease to room temperature b e - fore storage.
3. Remove the lamp cover (refer to the il - lustrati on). 4. Replace the used lamp with a new lamp of the same power and specifically de - signed for household appliances. (the maximum power is shown on the lamp cover). 5. Install the lamp cover. 6. Tighten the screw to the lamp cover.
Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Electrical connection Before plugging in, ensure that the voltage and frequency shown on the rating plate cor - respond to your do mestic power supply.
4. Loos en the middle h inge. 5. Remove the lower door. 6. Loosen and remove the lo wer pin. On the opposite side: 1. Tighten the lower pin. 2. Install the lower door. 3. Tighten the middle hinge. 4. Install the spacer. 5. Install the upper door. 6. Tighten the upper pin.
1. Apply the adhesive sealing str ip to the appliance as shown in figure. 2. Install the appliance in the niche. Push the appliance in the direction of the arrow (1) until the upper gap cover stops against the kitchen furniture. Push the appliance in the direction of the arrow (2) against the cupboard on the opposite side of the hinge.
4. Attach the appliance to the niche with 4 screws. 5. Remove the correct part from the hinge cover (E). Make sure to remove the part DX, in the case of right hinge, SX in opposite case. 6. Attach the covers (C, D) to the lugs and the hinge holes. Install the vent grille (B).
7. Disconnect the parts (Ha), (Hb), (Hc) and (Hd). 8. Install the par t (Ha) on the inner s ide of the kitchen f urniture. 9. Push the part (Hc) on the part (Ha).
10. Open the appliance door and the kitch - en furnitur e door at an angle of 90°. Insert the small squa re (Hb) into guide (Ha). Put together the appliance do or and the furniture door and mark the holes. 11. Remove the brackets and mark a dis - tance of 8 mm from the outer edge of the door where the nail must be fitted (K).
13. Press the part (Hd) on the pa rt (Hb). 14. To open the doors do these step s. Use the sliding system previously illus - trated or open one of the two doors by fitting the small handle supplied as an acces - sory. Do a final check to make sure that: • All screws are ti ghtened.
21.
22.
23.
www.aeg-electrolux.com/shop 212720 301-00-20052010.
An important point after buying a device Electrolux SDS51400S0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux SDS51400S0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux SDS51400S0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux SDS51400S0 you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux SDS51400S0 will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux SDS51400S0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux SDS51400S0.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux SDS51400S0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux SDS51400S0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
