Instruction/ maintenance manual of the product SANTO K 78800 Electrolux
Go to page of 24
SANT O K 78800 i Built-In Refriger ator Oper ating and Installation Instructions.
Dear customer , Before placing your new r efrigerator/fr eezer into operation please r ead these operating instructions car efully . They contain important informa- tion for safe use, for installation and for care of the appliance. Please keep these operating instructions for futur e refer ence.
3 Contents Important Safety Instruction s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Dis posal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appliance P ackaging Information .
4 Important Safety Instructions These warnings ar e provided in the inter ests of your s afety . Ensur e you fully understand them befor e installing or u sing the appliance. Y our safety i s of paramount importance. If you ar e unsure about the meaning of these warnings contact the Cu stomer Care Department for assi stance.
5 Important Safety Instructions • Please make old appliances unusable prior to disposal. Pull out the mains plug, cut off the mains cable, break or r emove spring or bolt catches, if fitted.
Disposal Appliance P ackaging Information All materials are envir onmentally sound! They can be disposed of or burned at an incinerating plant without danger . About the materials: The plastics can be recycled and ar e identified as follows: >PE< for polyethylene, e.
Installation Installation Location The appliance should be set up in a well ventilated, dry room. Energy use and efficient performance of the appliance is affected by the ambient temperatur e. The appliance should therefor e – not be exposed to direct sunlight; – not be installed next to radiator s, boilers or in a very cold r oom e.
8 Instructions for building-in the appliance Building-in Dimensions of the recess Height of housing 880 mm Depth of housing 550 mm Width of housing 560 mm It is necessary that the cabinet has a ventila- tion recess with the following dimensions: Depth 50 mm Width 540 mm 540 50 560 550 880 ☞ 1.
9 Instructions for building-in the appliance 2. Push the appliance into the housing until stop strip (A) touches the kitchen unit. 3. Open the door and push the appliance against the side of kitchen furniture oppo- site to that of appliance hinges. 4.
10 Instructions for building-in the appliance 9. Fix cover (C) on guide (A) until it clips into place. 13. Should the lining up of the furniture door be necessary , use the clearance of slots. At the end of operations, it is necessary to check if the door of the furniture closes properly .
14. Fix cover (D) on guide (B) until it clips into place. PR167/1 D B Electrical Connection Any electrical work requir ed to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED The manufacturer declines any liability s hould these safety mea- sures not be observed.
Description of the appliance 3.The wire colour ed brown must be connected to the terminal marked “L” or coloured r ed. 4.Upon completion there must be no cut, or str ay strands of wir e pre- sent and the cord clamp must be secur e over the outer sheath.
13 Prior to Initial Start–Up Please clean the appliance interior and all accessories prior to initial start-up (see section: “Cleaning and Care”). ☞ Starting up and temper ature r egulation Important! Only use the appliance when built–in! ☞ 1.
14 Interior Accessories Stor age shelves Various glass stor age shelves are included with your appliance. The height of the storage shelves can be adjusted: ☞ 1. To do this pull the stor age shelf for- ward until it can be swivelled upwards or downwar ds and removed.
Corr ect storage For physical reasons, ther e are differ ent temperatur e regions in the fridge. The coldest region is on the lowest stor age shelf. Warmer r egions are the top stor- age shelf, the vegetable drawer and the storage compartments on the door .
Cleaning and Car e For hygienic reasons the appliance interior , including interior acces- sories, should be cleaned regularly . Warning! • The appliance must not be connected to the mains during cleaning.
17 Ener gy Saving Tips • Do not install the appliance near boilers, r adiators or other sour ces of heat. High ambient temperatur es cause longer , more frequent operation of the compr essor . • Ensure sufficient air cir culation and exhaust at the appliance base and at the back wall of the appliance.
18 What to do if ... The compressor does not start immediately after changing the temperatur e setting. This is normal, no error has occurred. Water in the bottom of the cabinet. Water dr ain hole is blocked. See the “Cleaning and Care” section. The compressor starts after a period of time.
19 Changing the light bulb Warning! Ther e is a risk of electric shocks! Before changing the light bulb , switch off the appliance and unplug it, or disconnect from the power supply . Light bulb data: 220-240 V, max. 15 W ☞ 1. To switch off the appliance, turn the thermostat knob to position "0".
20 Regulations , Standards , Guidelines This appliance was designed for household use and was manufactured in accordance with the appr opriate standards.
21 T echnical terminology • Refrigerant Liquids that can be used to a generate a cooling effect ar e known as refriger ants. They have a relatively low boiling-point, indeed so low , that the warmth from the food stor ed in the fridge or freezer can cause the refriger ant to boil and vaporise.
.
.
AEG Hausgeräte GmbH P ostfach 1 036 D-90327 Nürnberg http://www .aeg.hausgeraete.de © Electrolux plc 2003 2222 754-5 1 -02- 0 203 Subject to change without notice.
An important point after buying a device Electrolux SANTO K 78800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux SANTO K 78800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux SANTO K 78800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux SANTO K 78800 you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux SANTO K 78800 will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux SANTO K 78800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux SANTO K 78800.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux SANTO K 78800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux SANTO K 78800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
