Instruction/ maintenance manual of the product SANTO 70398-DT Electrolux
Go to page of 26
SANTO 70398-DT Refrigerator/Freezer Op erating Instructions.
2 Dear customer, Before switching on your new refrigerator/freezer please read these opera- ting instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference.
3 Contents Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Appliance Packaging Information . . . .
4 Safety The safety aspects of our refrigerator/freezers comply with accepted tech- nical standards and the German Appliance Safety Law. Nevertheless, we consider it our obligation to make you aware of the following safety infor- mation: Intended use • The refrigerator is intended for use in the home.
5 Daily Op eration • Containers with flammable gases or liquids can leak at low temperatures. There is a risk of an explosion! Do not store any containers with flamma- ble materials such as, for example, spray cans, fire extinguisher refill car- tridges etc in the refrigerator/freezer.
6 Warning! Before disposing of old appliances make them inoperable. Remo- ve plug from mains, sever the power cable, remove or destroy any snap or latch closures, to prevent small children being trapped inside.
7 Prior to Initial Start-Up Before connecting the appliance to the mains and putting it into ope- ration for the first time, leave the appliance to stand for 30 minutes if it was transported upright. After transp orting on its side, the appliance must be left to stand for 4 hours before switching it on.
8 The following effects are of significance in respect of the interior tem- perature: – Ambient temp erature; – Quantity and temperature of the food stored; – Frequency with which the door is opened and how long it is left open.
9 Interior Accessories Stor age shelves • You should always slide one of the full size glass storage shelf into the lowest set of guides, above the fruit and the vegetable containers, and keep it in this position.
10 Cooked foods, cold dishes, etc : these should be covered and may be placed on any shelf. Fruit and vegetables: these should be thoroughly cleaned and placed in the special drawer(s) provided.
11 Freezing Attention ! • Before foods are frozen, the actual temperature in the freezer com- partment must be -18°C or colder. • Please observe indicated freezing capacity on the serial plate. The freezing capacity represents the maximum amount of fresh goods that can be frozen within 24 hours.
12 Frozen Storage Attention! Before initial loading of the freezer compartment with previously frozen goods, the required storage temperature of -18°C must be reached. The freezer door storage compartment (2 stars) serves only for storage purposes at -12 °C.
13 Pr epar ation of Ice Cubes 1. Fill the ice cube tray 3/4 full with cold water, place it in the freezer com- partment and leave to freeze. 2. To loosen the frozen cubes, either bend the ice cube tray or hold it under running water for a few seconds.
14 Defr osting The refrigerator is defrosted automatically The integrated evaporator on the rear wall of the refrigerator com- partment is defrosted fully automatically.
15 Cleaning and Car e For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly. Warning! • The appliance may not be connected to the mains during cleaning.
16 5. After cleaning wipe with fresh water and rub dry. Accumulation of dust at the condenser increases energy consumption. For this reason carefully clean the condenser at the back of the appliance once a year with a soft brush or a vacuum cleaner. 6.
17 What to do if ... Correcting Malfunctions Perhaps a malfunction has been caused by a minor error, which you can correct yourself with the help of the following instructions. Do not attempt any further repairs if the following instructions do not help in each specific case.
18 Changing the Light Bulb Warning! Danger of electrical shock! Before replacing the light bulb switch appliance off and remove the mains plug, or switch off or turn out the circuit breaker or fuse. Light bulb specifications: 220-240 V, max. 15 W , fitting: E 14 To switch the appliance off turn the temperature regulator to position "0".
19 Service and Spar e P arts In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning: 0870 5 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area.
20 GUARANTEE CONDITIONS Standard guarantee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG applian- ce or any part thereof is proved to be defective by reas.
21 Installation Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED The manufacturer declines any liability should these safety measures not be observed.
22 P ositioning This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rat- ing plate, which is located at the left on the inside of the appliance.
23 Reversing the Doors Before carrying out any operations, remove the plug from the p ower socket. To reverse the door, proceed as follows: 1. Remove the upper hinge and the upp er support taking care that the upper door not fall off ; 2. remove the upper door; 3.
24 Regulations , Standards , Guidelines This appliance was designed for household use and was manufactured in accordance with the appropriate standards.
.
AEG 55-77 High Street SLOUGH Berks SL1 1DZ http://www.aeg.co.uk © Copyright by AEG 214.3617.41 06/04 Subject to change without notice.
An important point after buying a device Electrolux SANTO 70398-DT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux SANTO 70398-DT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux SANTO 70398-DT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux SANTO 70398-DT you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux SANTO 70398-DT will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux SANTO 70398-DT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux SANTO 70398-DT.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux SANTO 70398-DT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux SANTO 70398-DT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
