Instruction/ maintenance manual of the product Santo 1573TK-4 Electrolux
Go to page of 24
ÖKO-SANTO SUPER Automatic Refrigerator Santo 1573TK-4 Operating Instructions.
2 Dear customer, Before placing your new refrigerator/freezer into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference.
3 Contents Safet y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..4 Disposa l . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appliance Packaging Informatio n .
4 1 Safety The safety aspects of our refrigerators/freezers comply with accepted technical standards and the German Appliance Safety Law. Nevertheless, we consider it our obligation to make you aware of the following safety information: Intended use • The refrigerator is intended for use in the home.
Safety 5 themselves in the fridge when playing (there is risk of suffocation!) or get themselves into other dangerous situations. • Often children cannot recognise the hazards present in household appliances.
6 Disposal Appliance Packaging Information All materials are environmentally sound! They can be dumped or burned at an incinerating plant without danger! About the materials: The plastics can be recycled and are identified as follows: >PE< for polyethylene, e.
7 3 You can remove any remnants of adhesive using white spirit. 0 Remove all adhesive tape and packing pieces from the interior of the appliance. Installation Installation Location The appliance should be set up in a well ventilated, dry room. Energy use is affected by the ambient temperature.
Installation 8 Your refrigerator needs air The refrigerating unit of your refrigerator is designed for maintenance- free operation. What it should never lack is good ventilation. Air is sup- plied under the door through the ventilation slot between the refriger- ator an storage surface.
Installation 9 Mounting under a continuous worktop If installed under a continuous worktop, the appliance is fastened with a mounting screw (A) under the panel. Rehingeing the door The side at which the door opens can be changed from the right side (factory adjustment) to the left side, if the installation site requires.
Installation 10 0 Unscrew the handle. Refit it on the opposite side after having pierced the plugs with a punch. Cover the holes left open with the plugs contained in the documentation pack. Changing over the freezer compartment door 0 Open the freezer compartment door a little way.
11 Prior to Initial Start–Up 0 Please clean the appliance interior and all accessories prior to initial start-up (see section: “Cleaning and Care”). Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
12 Plug socket The plug socket necessary for con- nection of your appliance to the electricity supply should be positio- ned so that it is possible to pull out the appliance plug. If your appliance is installed under a continuous worktop, the plug socket should be provided as shown.
13 If you require a lower temperature, select setting „3“ or „4“. On this setting, you can be sure the fresh food will be reliably frozen and that a storage temperature of -18°C will be maintained in the freezer compartment.
14 VARIO glass storage shelf Your appliance is equipped with two half size glass storage shelves. Storing tall items: 0 Slide the front half of the Vario storage shelf in another level to the rear. By this means you will gain space to place tall items on the storage shelf below.
15 Freezing and storing frozen food The freezer compartment is for freezing and storing food. Important! • The temperature in the freezer compartment must be –18 °C or col- der before freezing food or storing food already frozen. • Do not freeze too large a quantity at any one time (max.
16 Preparation of Ice Cubes 0 Fill the ice cube tray 3/4 full with cold water, place it in the freezer compartment and leave to freeze. 0 To loosen the frozen cubes, either bend the ice cube tray or hold it under running water for a few seconds.
17 0 Switch off the appliance and unplug it, or pull the fuse or switch off the circuit breaker. 0 Remove the stopper from the melt- water outlet and place a bowl underneath it to catch the melt- water. Tip: You can speed up the defrosting process by placing a pan with hot water in the freezer compartment and closing the doors.
18 Cleaning and Care For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly. 1 Warning! • The appliance may not be connected to the mains during cleaning.
19 0 Check the water drain hole on the rear wall of the fridge. Clear a blocked drain hole with the aid of the green peg in the pack of accessories included with the appliance. 0 After everything is dry place appliance back into service. 2 Energy Saving Tips • Do not install the appliance near cookers, radiators or other sources of warmth.
20 What to do if ... Correcting Malfunctions Spare parts: Minor repairs you can carry out yourself, spare parts can be ordered from the service centre.
What to do if ... 21 The food is too warm. Temperature is not properly adjusted. Please look in the "Initial Start Up" section. Door was open for an extended period. Open the door only as long as necessary. A large quantity of warm food was placed in the appliance within the last 24 hours.
What to do if ... 22 Changing the light bulb 1 Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or the circuit breaker. Light bulb data: 220-240 V, max. 15 W 0 To switch off the appliance, turn the temperature regulator to position "0".
23 Customer Service If you cannot find the remedy for a malfunction in these operating instructions, please contact your dealer or our customer service department. Addresses and telephone numbers are listed in the accompanying booklet "Guarantee Conditions/Customer Service Locations".
AEG H ausgeräte G m bH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.de © Copyright by AEG H 271 286 200 –01-0298 2222 649-51.
An important point after buying a device Electrolux Santo 1573TK-4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux Santo 1573TK-4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux Santo 1573TK-4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux Santo 1573TK-4 you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux Santo 1573TK-4 will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux Santo 1573TK-4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux Santo 1573TK-4.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux Santo 1573TK-4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux Santo 1573TK-4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
