Instruction/ maintenance manual of the product PR43RE1FEU Electrolux
Go to page of 19
PART NO. 5957 410 01 VERSION 2 2005.12 "PROSTORE SMART" VERTICAL REFRIGERATORS FRIGORIFERI VERTICALI "PROSTORE SMART" RÉFRIGÉRATEURS VERTICAUX "PROSTORE SMART" FRIGORÍ.
2 K I 2 3 / 4 " 7 0 m m 23 27 / 64 " 5 9 5 m m 23 5 / 8 " 600 m m 53 / 64 " 21 mm 1 37 / 64 " 4 0 m m 7 3 m m 47 1 / 4" 12 00 m m 83 5 / 32 " 2112 mm 600 m m 53 / 64.
3 CONTROL PANEL PANNELLO COMANDI 2 3 4 1 CA TEGORY HUM HIGH % SET HACCP ACCESS T O FOOD CA TEGORIES HIGH HUM. ON/OFF SERVICE ALARMS PRINT TEMPERA TURE/ CA TEGORY SELECTION MANUAL DEFROST COMPRESSOR S .
4 REVERSING OPENING OF THE DOOR INVERSIONE APERTURA DELLE PORTE H G F E (Dett.1) (Dett.2) INVERSION DU SENS D'OUVERTURE DE LA PORTE CAMBIO DE DIRECCIÓN DE APERTURA DE LA PUERTA.
5 LEVELLING THE APPLIANCE LIVELLAMENTO DELL'APPARECCHIATURA +30 mm -10 mm MISE À NIVEAU DE L'APPAREIL NIVELADO DEL APARATO.
6 PRODUCT LOADING DIAGRAM SCHEMA DI RIEMPIMENTO DEL FRIGORIFERO DIAGRAMME DE CHARGEMENT DU PRODUIT DIAGRAMA DE CARGA DE PRODUCTO.
7 SAFETY INSTRUCTIONS ......................................................... Page 9 A . 1 GENERAL INFORMA TION ........................................................ Page 10 A.1.1 Foreword .........................................................
8 C.1.7.1 General description ..................................................................................................... Page 15 C.1.7.2 HACCP .................................................................................................
9 SAFETY INSTRUCTIONS T o reduce the risk of fire, electrical shock, or injury when using your appliance, please follow these basic precautions including the following: • Read all instructions before using your appliance. • This Manual does not cover every possible condition and situation that may occur .
10 A.1.1 FOREWORD The purpose of this manual is to provide the necessary information for the correct installation, operation, use and maintenance of the appliance.
11 WEAR PROTECTIVE GLOVES WHEN UNPACKING AND INSTALLING THE APPLIANCE. Read these instructions carefully before attempting installation. Installation and initial startup should be performed by a qualified installer.
12 K 53 / 64 " 21 mm 1 37 / 64 " 4 0 m m 53 / 64 " 21 mm B.2.2 ELECTRICAL CONNECTION When making the electrical connection, carefully comply with the information on the dataplate.
13 C.1.1 CONTROL P ANEL 2 3 4 1 CA TEGORY HUM HIGH % SET HACCP ACCESS TO FOOD CA TEGORIES HIGH HUM. ON/OFF SERVICE ALARMS PRINT TEMPERA TURE/ CA TEGORY SELECTION MANUAL DEFROST COMPRESSOR S TAT U S PO.
14 - press SET/DOWN button or MANUAL DEFROST/UP button temperature SET or - T o store the new set value, wait until it stop s flashing to exit the program SET Here below the temperature range for the appliances: Position “MIN” = 32°F / 0°C Position “MAX” = +50°F / +10°C C.
15 There is a sticker inside the chamber indicating the maximum level of loading: Cover or wrap food before placing it in the refrigerator and avoid putting hot foods or steaming liquids inside. Do not leave the door open longer than necessary when putting in or taking out products.
16 starting and ending time and date of the alarm are shown by a rolling label: “TEMP 78.8F/26C Start 17.05 10-10-99 End----” . T o have access to recorded HACCP alarms press HACCP button for 4 seconds; now the display visualizes HISt and then AL_1 (symbol of the alarm); this shows the last maximum chamber temperature alarm stored in the PCB.
17 C.1.7.5 ALARM MANAGING · Whenever a high chamber temperature alarm occurs the display shows the label “TEMP” and the buzzer is active. · T o reset the buzzer press the HACCP button for 1 second. · Whenever a type “ b ” service alarm occurs the display shows the label code of the alarm and the buzzer is active.
18 Non-routine maintenance tasks must be performed by an AUTHORIZED SERVICE AGENT. USE APPROPRIATE SAFETY GEAR (GLOVES AND MASK) WHEN CARRYING OUT ANY MAINTENANCE OPERATION.
19 D.4.1 WASTE STORAGE At the end of the appliance’s working life, make sure it is dis- posed of properly . Make sure you remove the doors before scrapping the appliance. S pecial waste materials can be stored temporarily while await- ing processing for disposal and/or permanent disposal.
An important point after buying a device Electrolux PR43RE1FEU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux PR43RE1FEU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux PR43RE1FEU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux PR43RE1FEU you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux PR43RE1FEU will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux PR43RE1FEU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux PR43RE1FEU.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux PR43RE1FEU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux PR43RE1FEU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
