Instruction/ maintenance manual of the product PL36WC50EC Electrolux
Go to page of 12
Model PL36WC50EC ENGLISH.....................................3 FRANÇAIS................................12 99043841A.
- 3 - READ AND SAVE THESE INSTRUCTIONS WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: 1 . Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address or telephone number listed in the warranty.
- 4 - OPERATION Controls The hood is operated using the (4) push-buttons located at eye-level, on the front edge of the hood. The light switch turns the halogen lamps on and off. The blower on-low / off switch turns the blower on to its lowest running speed.
- 5 - PREPARE THE HOOD Unpack hood and check contents. You should receive: 1 - Hood 1 - Decorative Flue Assembly 1 - Parts Bag containing: 1 - Mounting Bracket 1 - Discharge Collar 1 - Flue Mounting Bracket 8 - Mounting Screws (4.8 x 38mm Pan Head) 4 - Mounting Screws (3.
- 6 - 39” INSTALL ELECTRICAL WARNING: Electrical wiring must be done by a qualified person(s) in accor- dance with all applicable codes and standards. This range hood must be properly grounded. Turn off electrical power at service entrance before wiring.
- 7 - PREPARE THE HOOD Note: On stainless steel hoods, carefully remove the plastic protective film from all exterior surfaces of the hood and decorative flues, prior to final installation. (DUCTED HOODS ONLY) Install the discharge collar into the duct connector of the range hood.
- 8 - PREPARE THE HOOD (NON - DUCTED HOODS ONLY) Note: The following materials must be purchased separately for non-ducted recirculation installations. • Non - Ducted Recirculation Kit, Model DFKTWC50EC. • 5” diameter metal duct. 1. Discard discharge collar supplied with the hood.
- 9 - MAKE ELECTRICAL CONNECTIONS WARNING: Electrical wiring must be done by a qualified person(s) in accor- dance with all applicable codes and standards. This range hood must be properly grounded. Turn off electrical power at service entrance before wir- ing.
- 10 - INSTALL FILTERS (DUCTED AND NON-DUCTED HOODS) 1. To remove the GREASE filter, push in on the metal latch tab and tilt filter downward to remove. 2. To install the GREASE filter, align rear filter tabs with slots in the hood. Depress the metal latch tab, push filter into position and release.
- 11 - Major Appliance Warranty Information Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or r.
- 21 - SERVICE PARTS - LISTE PIECES DE RECHANGE MODELS PL36WC50EC KEY No. DESCRIPTION (ENGLISH ) 9 Grease Filter 1 4 Motor Capacitor 1 6 Wiring Plate 2 6 Lamp Bulb 45 Blower 4 8 Motor 4 9 Blower Wheel.
- 22 - SERVICE PARTS - LISTE PIECES DE RECHANGE MODEL PL36WC50EC.
An important point after buying a device Electrolux PL36WC50EC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux PL36WC50EC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux PL36WC50EC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux PL36WC50EC you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux PL36WC50EC will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux PL36WC50EC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux PL36WC50EC.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux PL36WC50EC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux PL36WC50EC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
