Instruction/ maintenance manual of the product MGH 621 Electrolux
Go to page of 16
GAS HOB MGH 621 INSTRUCTION BOOKLET Please read this instruction booklet before using the appliance Keep this instruction book for future reference and ensure it is passed on to any new owner. 1. Hob T op 2. Rapid Burner 3. Semi-rapid Burners 4. Auxiliary Burner 5.
2 Import ant Safety Information You MUST read hese warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08705 950950 Inst allation .
3 The following symbols will be found in the text to guide you throughout the Instructions: Safety Instructions Step by step instructions for an operation Hints and Tips Environmental information Guide to Use the instructions Never use plastic or aluminium foil dishes on the hob.
4 Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply . The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool.
5 SYMPTOM There is no spark when lighting the gas. The gas ring burns unevenly . SOLUTION Check that the unit is plugged in and the electrical supply is switched on. Check that the RCCB has not tripped (if fitted). Check the mains fuse has not blown.
6 Overall dimensions Cut out dimensions Width: 580 mm. Width: 550 mm. Depth: 500 mm. Depth: 470 mm. Engineers technical data Instructions for the Inst aller Rear Left Burner (semi-rapid) Heat Input 2.0 kW (6824 BTU/HR) Front Left Burner (rapid) Heat Input 3.
7 Import ant safety requirement s 700 mm 400 mm 100 mm 400 mm 50 mm 55 mm 50 mm 650 mm 400 mm 400 mm 100 mm 50 mm 50 mm 55 mm 600 mm FO 0812 FO 0813 FITTING THE GAS HOB WITHOUT A COOKER HOOD ABOVE FIT.
8 When the hob is first installed Once the hob has been installed, it is important to remove any protective materials, which were put on in the factory . On the end of the shaft, which includes the GJ 1/2" threaded elbow , adjustment is fixed so that the washer is fitted between the components as shown in the diagram.
9 FO 0763 FO 0764 Dimensions are given in mm. Building In Building over a cupboard or drawer If the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board below the base of the hob on the underside of the work surface.
10 Permanent Connection In the case of a permanent connection, it is necessary that you install a double pole switch between the hob and the electricity supply (mains), with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations.
11 Wiring Diagram Commissioning When the hob has been fully installed it will be necessary to check the minimum flame setting. T o do this, follow the procedure below . 1. Turn the gas tap to the MAX position and ignite. 2. Set the gas tap to the MIN flame position then turn the control knob from MIN to MAX several times.
12 Conversion from Natural Gas to LPG It is important to note that this model is designed for use with natural gas but can be converted for use with butane or prop ane gas providing the correct injectors are fitted. The gas rate is adjusted to suit.
13 BURNER RAPID SEMI-RAPID AUXILIARY (large) (medium) (small) POSITION MA X MIN MAX M IN MAX M IN NOMINAL THERMAL 3. 0 0.65 2.0 0.45 1.0 0.33 POWER (kW) NOMINAL FLOW 0.286 0.062 0.190 0.043 0.095 0.031 RATE (m 3 /h) NOZZLE REFERENCE 11 9 Adjust. 96 Adjust.
Service and S pare Part s If you require spare parts or an engineer contact your local Service Force Centre by telephoning: 08705 929 929 Your call will be routed to the Service Centre covering your post code area. The addresses of Service Force Centres are detailed on the following pages.
.
Grafiche MDM - Forlì 35676-2903 07/06 www .electrolux.com.
An important point after buying a device Electrolux MGH 621 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux MGH 621 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux MGH 621 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux MGH 621 you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux MGH 621 will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux MGH 621, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux MGH 621.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux MGH 621. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux MGH 621 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
