Instruction/ maintenance manual of the product K 78800-4 i Electrolux
Go to page of 24
SANT O K 78800-4 i Refriger ator Oper ating Instructions PERFEKT IN FORM UND FUNKTION.
2 Dear customer , Before placing your new r efrigerator/fr eezer into operation please r ead these operating instructions car efully . They contain important informa- tion for safe use, for installation and for care of the appliance. Please keep these operating instructions for futur e refer ence.
3 Contents Important Safety Instruction s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Dis posal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appliance P ackaging Information .
4 Important Safety Instructions These warnings ar e provided in the inter ests of your s afety . Ensur e you fully understand them befor e installing or u sing the appliance. Y our safety i s of paramount importance. If you ar e un sure about the meaning of these warnings contact the Cu stomer Care Department for assi stance.
5 • Please make old appliances unusable prior to disposal. Pull out the mains plug, cut off the mains cable, break or r emove spring or bolt catches, if fitted. By doing this you ensure that childr en cannot lock themselves in the appliance when playing (there is risk of suffoca- tion!) or get themselves into other dangerous situations.
6 Disposal Appliance P ackaging Information All materials are envir onmentally sound! They can be disposed of or burned at an incinerating plant without danger . About the materials: The plastics can be recycled and ar e identified as follows: >PE< for polyethylene, e.
7 Installation Installation Location The appliance should be set up in a well ventilated, dry room. Energy use and efficient performance of the appliance is affected by the ambient temperatur e.
8 Installation Building-in Please check whether , after installing your appliance and especially after rever sing the door , the door seal seals right round. A badly fitting door seal may lead to heavy frosting and ther eby to a higher power consumption (see also „What to do if.
9 Installation ☞ 1. The appliance’s door has been locked in position for transport by means of pins on both sides. According to the door opening dir ection, remove relevant pins at the top and at the bottom. B A 2. Press in the joint cover s between the appliance and the kitchen furniture.
10 Installation 5. Apply blanking covers (B) as indicated. B B 6. Separate parts A, B, C, D as shown in the figure. A B C D 7. Place guide (A) on the inside part of the furniture door , upper and lower posi- tions as shown in the figure and mark the position of external holes.
11 Installation 9. Open the appliance door and the furni- ture door at 90°. Insert the small squar e (B) into guide (A). Put together the appliance door and the furniture door and mark the holes as indicated in the figure. Remove the squares and drill holes with Ø 2 mm at 8 mm from the outer edge of the door .
12 Installation P ower supply A correctly installed, earthed socket is r equired for the electrical sup- ply . The supply must have a fuse rating of at least 1 0 Amps. If the socket is not accessible once the appliance is built in, the electrical installation must include suitable means of isolating the appliance from the mains (e.
13 1.The wire colour ed green and yellow must be connected to the termi- nal marked with the letter “E” or by the earth symbol or coloured green and yellow . 2.The wire colour ed blue must be connected to the terminal “N” or coloured black. 3.
14 Prior to Initial Start–Up Please clean the appliance interior and all accessories prior to initial start-up (see section: “Cleaning and Care”). ☞ Starting up and temper atur e regulation Important! Only use the appliance when built–in! ☞ 1.
15 Interior Accessories Stor age shelves Various glass stor age shelves are included with your appliance. The height of the storage shelves can be adjusted: ☞ 1. To do this pull the stor age shelf for- ward until it can be swivelled upwards or downwar ds and removed.
16 Corr ect stor age For physical reasons, ther e are differ ent temperatur e regions in the fridge. The coldest region is on the lowest stor age shelf. Warmer r egions are the top stor- age shelf, the vegetable drawer and the storage compartments on the door .
Cleaning and Car e For hygienic reasons the appliance interior , including interior acces- sories, should be cleaned regularly . Warning! • The appliance must not be connected to the mains during cleaning.
18 Symptom P ossible Cau se Remedy Appliance does not work. Appliance is not switched on. Mains plug is not plugged in or is loose. Fuse has blown or is defec- tive Socket is defective. Mains malfunctions are to be corrected by an electrician. Switch on the appliance.
19 What to do if ... The compressor does not start immediately after changing the temperatur e setting. This is normal, no error has occurred. Water in the bottom of the cabinet. Water dr ain hole is blocked. See the “Cleaning and Care” section. The compressor starts after a period of time.
20 Changing the light bulb Warning! Ther e is a risk of electric shocks! Before changing the light bulb , switch off the appliance and unplug it, or disconnect from the power supply . Light bulb data: 220-240 V, max. 15 W ☞ 1. To switch off the appliance, turn the thermostat knob to position "0".
21 Regulations , Standar ds, Guidelines This appliance was designed for household use and was manufactured in accordance with the appr opriate standards.
22 T echnical terminology • Refrigerant Liquids that can be used to a generate a cooling effect ar e known as refriger ants. They have a relatively low boiling-point, indeed so low , that the warmth from the food stor ed in the fridge or freezer can cause the refriger ant to boil and vaporise.
.
AEG Hausgeräte GmbH P ostfach 1 036 D-90327 Nürnberg http://www .aeg.hausgeraete.de © Electrolux plc 2004 2222 754-52 -00- 0304 Subject to change without notice.
An important point after buying a device Electrolux K 78800-4 i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux K 78800-4 i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux K 78800-4 i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux K 78800-4 i you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux K 78800-4 i will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux K 78800-4 i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux K 78800-4 i.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux K 78800-4 i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux K 78800-4 i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
