Instruction/ maintenance manual of the product K 7 18 40 - 1i Electrolux
Go to page of 24
SANT O K 7 18 40 - 1i Integr ated Fridge Freezer Oper ating and Installation Instructions.
2 Dear cu stomer , Befor e placing your new r efrigerator/fr eezer into operation please r ead the- se operating instructions car efully . They contain important information for safe use, for installation and for car e of the appliance. Please keep these oper ating instructions for future r eference.
3 Contents Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Dis posal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Appliance P ackaging Information .
4 Safety Please read this instruction book befor e using the appliance and r etain for futur e r eference. These warnings ar e provided in the inter ests of your safe- ty , ensure you understand them fully befor e using the appliance. Intended u se • The appliance is intended for use in the home.
5 Daily Oper ation • Containers with flammable gases or liquids can leak at low temper atur es. Ther e is a risk of an explosion! Do not stor e any containers with flamma- ble materials such as, spray cans, fir e extinguisher refill cartridges etc in the refriger ator/freezer .
6 Remove tr ansport packaging The appliance and the interior fittings ar e protected for tr ansport. • Remove all adhesive tape and packing pieces fr om the interior of the appliance. Disposal of old Appliances For environmental r easons, refriger ation appliances must be disposed of properly .
7 Starting up and temper ature r egulation W ash the inside of the appliance with lukewarm water with a little bicar - bonate of soda added (5ml to 0,5 litr e of water). Do not use soap or deter- gent as the smell may linger . Dry the appliance thoroughly .
8 Interior Accessories Stor age Shelves The glass shelf above the fruit and vegetable compartment should always remain in position, to ensure fruit and vegetables stay fresh longer . The remaining stor age shelves can be adjusted to various heights: Pull the storage shelf forwar d until it can be tipped up or down and remo- ved.
9 Butter and cheese: these should be placed in special airtight container s or wr apped in aluminium foil or polythene bags to exclude as much air as pos - sible. Milk bottles: these should have a cap and should be stor ed in the bottle r ack on the door .
10 1. Place the packed food in the drawer s. Place food to be frozen in the upper drawer . Unfrozen food must not touch items alr eady frozen, otherwise the fr ozen food could begin to defr ost. 2. Place frozen foods in the dr awers sorted by type, as far as possible.
11 4. T urn the thermostat knob to the r equired setting and r eplace the plug in the power socket. W arning! Never use metal tools to scr ape off the frost Do not use a mechanical device or any artificial means to speed up the thawing process other than those r ecommended by the manufactur er .
12 – cleansers which contain acetic acid. Do not allow such substances to come into contact with appliance parts. • Many proprietary kitchen surface cleaner s contain chemicals that can attack/damage the plastics used in this appliance.
13 Something Not W orking If the appliance is not functioning corr ectly , please carry out the following checks before contacting your local AEG Service For ce Centr e. W arning! Repair s should only be carried out by qualified service engineer s. Repairs carried out by inexperienced persons may cause injury or serious malfunc - tioning.
14 If, after carrying out the necessary checks ther e is still a fault with your appliance please contact your local AEG Service For ce Centre. In guarantee cu stomer s s hould ensur e that the suggested check s have been made as the engineer will make a char ge if the fault is not a mechanical or electrical br eakdown.
15 Service and Spar e Parts In the event of your appliance r equiring service, or if you wish to purchase spar e parts, please contact your local Service For ce Centr e by telephoning: 087 0 5 929929 Y our telephone call will be automatically routed to the Service For ce Cen- tr e covering your post code ar ea.
16 Guar antee Conditions Guar antee Conditions AEG offer the following guarantee to the fir st purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first r etail purchaser , which must be verified by pur chase invoice or similar documen- tation.
17 Installation Electrical Connection Any electrical work r equired to install this appliance should be carried out by a qualified electrician or competent per son. WARNING – THIS APPLIANCE MUST BE EARTHED The manufactur er declines any liability should these s afety measures not be observed.
18 P ositioning This appliance should only be installed at a location wher e the ambient temperatur e corresponds to the climate classification indicated on the r at- ing plate, which is located on the inside left of the appliance. The following table shows which ambient temper ature is corr ect for each climate classification.
19 Housing dimensions Height 1780 mm Depth 550 mm Width 560 mm Inner door r eversal 1. Using a screwdriver r elease bracket (1) by pressing on the internal spring and withdraw it fr om its seat togeth.
20 Push appliance into the housing until stop strip (A) touches the kitchen unit. Instructions for building-in D765 Apply joint the sealing strip as shown in figure. 13mm D740 Ø 2,5 An additional midpoint location br acket may be fitted to the appli - ance (as shown) to assist r etention of the housing side wall.
21 D726 B Apply covers (B) into the r elevant holes. Separ ate parts A, B, C, D as shown in the figure PR266 A B C D D C D723/2 Open the door and push the appliance against the side of the kitchen unit op- posite to that of appliance hinges. Fasten the appliance with 4 scr ews provided in the kit included with the appliance.
22 Open the appliance door and the fur- nitur e door at 90°. Insert the small squar e (B) into guide (A). Put togeth - er the appliance door and the furni- tur e door and mark the holes as indi - cated in the figure. Remove the squar es and drill holes with ø 2 mm at 8 mm from the outer edge of the door .
23 Regulations , Standar ds , Guidelines This appliance was designed for household use and was manufactur ed in accor dance with the appr opriate standards.
AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www .aeg.hausgeraete.de 2222 221-43.
An important point after buying a device Electrolux K 7 18 40 - 1i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux K 7 18 40 - 1i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux K 7 18 40 - 1i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux K 7 18 40 - 1i you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux K 7 18 40 - 1i will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux K 7 18 40 - 1i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux K 7 18 40 - 1i.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux K 7 18 40 - 1i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux K 7 18 40 - 1i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
