Instruction/ maintenance manual of the product FI22/10SA Electrolux
Go to page of 16
user manual Fridge-Freezer FI22/10FA FI22/10SA.
Electrolux. Thinking of you. Share more of our thinki ng at www.electrolux.com Contents Safety information 2 Operation 4 First use 4 Daily use 4 Helpful hints and tips 6 Care and cleaning 6 What to do.
• It is dangerous to alter the specifications or modify this product in any way. Any dam- age to the cord may cause a short-circuit, fire and/or electric shock. Warning! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel.
by a qualified electrici an or competent per- son. • This product must be serviced by an au- thorized Service Cent re, and only genuine spare parts must be used. Environment Protection This appliance does not contain gasses which could damage the ozone lay er, in either its refrigerant circuit or insulation materials.
partment let the app liance run at least 2 hours on the higher s ettings. If large quantities of food are to be stored, remove all drawers and baskets from appli- ance and place food on cooling shelves to obtain the best performance.
Helpful hints and tips Hints for energy saving • Do not open the door frequently or leave it open longer than ab solutely necessary. • If the ambient temperat ure is high and the Temperature Regulator is set to low tem- perature and the appliance is fully loaded, the compressor may run continuously , causing frost or ice on the evaporator.
charging must theref ore only be carried out by authoriz ed technicians. Periodic cleaning The equipment has to be cleaned regularly: • clean the inside and accessories with luke- warm water and some neutral soap. • regularly check the door seals and wipe clean to ensure they are clean and free from debris.
4. When defrosting is completed, dry the in- terior thorou ghly and keep the scraper for future use. 5. Switch on the appliance. 6. After two or t hree ho urs, reload the pre- viously removed food into the compart- ment. Warning! Never use sharp metal tools to scrape off frost from the evaporator as you could damage it.
Problem Possible ca use Solution The product temperature is too high. Let the product temperat ure de- crease to room temperature before storage. The room temperature is too high. Decrease the room temperature. Water flows on the rear plate of the refrig erator.
Closing the door 1. Clean the door gaskets. 2. If necessary, adjust the door. Refer to "In- stallation". 3. If necessary, rep lace the defective door gaskets.
Door reversibility The door of the applia nce opens to the right. If you want to open the door to the left, do these steps before you install the appliance: 1. Loosen and remove the upper pin. 2. Remove the upper door. 3. Remove the spacer. 4. Loosen the middle hinge.
1 2 2. Adjust the applia nce in the niche. The lower hinge cover (in the accesso- ries bag) makes sure that the distance between the appliance and the kitchen furniture is correct. Open the door. Put the lower hinge cover in position. 44mm 4mm 3. Attach the appliance to the niche with 4 screws.
Attach the hinge cove rs (E) to the hinge. B E E D C 7. Connect the applian ce laterally to the kitchen furniture sidewall: a) Loosen the screws of the part (G) and move the part ( G) till the fur niture sidewall. b) Tigh ten the screws of the part (G) again.
Put together the app liance door and the furniture door and mark the holes. Ha Hb 8 mm 12. Remove the brackets and mark a dis- tance of 8 mm from the outer edge of the door where the nail must be fitted (K). Ha K 8 mm 13. Place the small square on the guide again and fix it with the screws supplied.
electrolux 15.
212715131-0 0-13102009 www.electrolux.com.
An important point after buying a device Electrolux FI22/10SA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux FI22/10SA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux FI22/10SA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux FI22/10SA you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux FI22/10SA will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux FI22/10SA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux FI22/10SA.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux FI22/10SA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux FI22/10SA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
