Instruction/ maintenance manual of the product EWS 126540 W Electrolux
Go to page of 28
user manual Washing Machine EWS 126540 W.
Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information 2 Product description 4 Control panel 5 First use 7 Personalisation 7 Daily use 8 Helpful hint.
INSTALLATION • This appliance is heavy. Care should be taken when moving it. • When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre. • All packing and transit bolts must be re- moved before use.
PRODUCT DESCRIPTION Your new appliance meets all modern requir ements for effective treatm ent of laundry with low water, energy and detergent consumption. Its new washing system allows to- tal use of detergent and reduces wa ter consumption so saving energy.
CONTROL PANEL Below is a picture of the control panel. It shows the program me sel ector di al as well as the buttons, pilot lights and the display. These are presented by relevant numbers on the following pages. 1 2 3 4 5 6 7 8 9 1 Programme selector dial 2 Display 3 TEMPERATURE button ( Temp.
TIME MANAGER These buttons allows you to modify t he programme duration automatically pro- posed by the appliance. DISPLAY 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.12 2.11 2.10 The display shows the following informa- tion: 2.1: Temperature value 2.2: Temperature icons , Cold .
icon 2.8 disappears and the door can be opened. • Incorrect option selection If an option which is not com patible with the set wash programme is selected, the messa ge Err is displayed at the bottom of the display for a f ew seconds and the integrated red light of button 8 start flash- ing.
fault). By press ing these 2 buttons again, the acoustic signal is reactivated. CHILD SAFETY LOCK This device permits you to leave the appli- ance unattended and not to worry that chil- dren might be injured by or cause damage to the appliance. This function remains ena- bled also when the washing machine is not working.
Caution! If you turn the program me selector dial to another programme when the machine is working, the red pilot light of bu tton 8 will blink 3 times and the message Err is displayed to indicate a wrong selection. The machine will not perform the new selected programme.
SELECT THE TIME MANAGER OPTION BY PRESSING BUTTONS 9 By pressing these bu ttons repeatedly, the duration of the was h ing cycle can be in- creased or decreased. The icon 2.10 will appear on the display to indicate the chos- en degree of soil. This opti on is available only with Cotton , Synthetic and Delicate programmes.
Turn the programme selector dial to to switch the machine off. Remove the laundry from the drum and carefully check that th e drum is empty. If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.
• powder detergents for delicate fabrics (60°C max) and woo llens • liquid detergents, preferably for low tem- perature wash programmes (60°C max) for all types of fabric, or special for wool- lens only. The detergent and any additives must be placed in the appropri ate compartments of the dispenser drawer before starting the wash programme.
Programme Maximum and Minimum Te mperature Cycle Descriptio n Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Deterge nt Compartment Delikatne 40° - Cold Main wash - Rinses Maximum spin speed: 700 rpm Max. load 3 kg - Reduced lo ad 2 kg 1) Delicate fa brics: acrylics, viscose, p olyester.
Programme Maximum and Minimum Te mperature Cycle Descriptio n Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Deterge nt Compartment Drain Draining of water Max. load 6 kg For emptying out the water of the last rinse in p ro- grammes with the option selected, which ends with water left in the tub.
Programme Maximum and Minimum Te mperature Cycle Descriptio n Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Deterge nt Compartment Sport light 30° Main wash - Rinses Maximum spin speed: 700 rpm Max. load 2.5 kg Short programme for lightly soiled mixed fabric sports clothes.
Flush it out under a tap, to remove any traces of accumulated powder. To aid cleaning, the top part of the additive compartment should be removed. Clean all parts with water.
2. Put a container below the recess of the drain pump to collect the water that flows out. 3. Press the two levers and pull forward the drainage duct to let the water flow out. 4. When the container is full of water, put the drainage duct back again and emp- ty the container.
3. Clean the filter in the hose using a hard bristle brush. 4. Screw the hose back onto the tap. 5. Unscrew the hose from the machine. Keep a rug nearby because some wa- ter may flow. 6. Clean the filter in the valve with a stiff brush or with the piece of cloth.
• : problem with the water supply. • : problem with the water draining. • : door open. Once the problem has been eliminated, press the button 8 to restart the pro- gramme. If after all checks, the proble m persists, contact your local Service Centre.
Problem Possible ca use/Solution There is water on the flo or: Too much detergent or unsuitabl e detergent (creates too much foam) has been used. • Reduce the detergent quan tity or use another one. Check whether there are any leaks from one of the inlet hose fit- tings.
If you are unable to id entify or solve the problem, contact our service centre. Before telephoning, make a note of th e model, se- rial number and purchase date of your ma- chine: the Service Centre will requi re this information. Mod. ... ... ... Prod.
1. After removing all the packaging, care- fully lay machine on it’s back to remove the polystyrene base from the bottom. 2. Remove the power supply cabl e and the draining hose from the hos e holders on the rear of the appliance. 3. Unscrew the three bolts.
WATER INLET An inlet hose is supplied and can been found inside the mach ine drum. Do not use the hose from your previous machine to connect to the water supply. Important! This appliance must be con- nected to a cold water supply. 1. Open the porthole and extract the inlet hose.
cannot come unhooke d when the ma- chine is emptying. This could be done by tying it to the tap with a piece of string or attaching it to the wall. • In a sink drain pip e branch. This branch must be above the trap so tha t the bend is at least 60 cm above the ground.
PACKAGING MATE RIALS The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropr iate collection containers.
26 electrolux.
electrolux 27.
132928090-A-4 62011 www.electrolux.com/shop.
An important point after buying a device Electrolux EWS 126540 W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux EWS 126540 W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux EWS 126540 W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux EWS 126540 W you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux EWS 126540 W will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux EWS 126540 W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux EWS 126540 W.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux EWS 126540 W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux EWS 126540 W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
