Instruction/ maintenance manual of the product EWS 1051 Electrolux
Go to page of 20
user manual Washing Machine EWS 85110 A EWS 105110 A.
Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information 2 Environment concerns 3 Technical information 4 Product description 4 Control panel 5 Program.
• Make sure that the mains plug is discon- nected from the main s socket during in- stallation. • Only a qualified person must do the elec- trical installation, th e plumbing and the in- stallation of the applia nce. This to prevent the risks of structural damage or injury.
TECHNICAL INFORMATION Dimensions Width / Height / Depth 595 / 850 / 390 mm Electrical connection: Voltage Overall power Fuse Frequency 220-240 V 2100 W 10 A 50 Hz Level of protection against ingress o.
2 Large plastic caps To close the holes on the rear side of the cabinet after the removal of the transit bolts. 3 Plastic hose guide To connect the drain hose on the edge of a sink. 4 Small plastic caps To attach the protect ion cover to th e bottom of the appliance.
PROGRAMMES Programme Temperature Type of load and soil Weight of load Programme phases Possible functions Хлопок 90° C White cotton with heavy soil. This programmes add also t he phase of hygiene to the laundry. max. 5 kg Wash Rinses Spin phase at the maximum speed Хлопок 1) 60° C White and fast coloured cotton with normal soil.
Programme Temperature Type of load and soil Weight of load Programme phases Possible functions Стирка без нагрева White and coloured cotton with light soil. max. 5 kg Wash Rinses Spin phase at the maximum speed Полоскание All fabrics.
Equivalent scales measure the water hard- ness: • German degrees (°dH). • French degrees (°TH). • mmol/l (millimol for each l itre - interna- tional unit for the hardness of water). • Clarke degrees. Water hardness table Level Type Water hardness °dH °T.
2 1 1 The detergent compartment for the prewash phase or for th e soak pro- gramme. Add the detergent for prewash and soak before the start of the pro- gramme. 2 The detergent compartment for the washing phase. If you use a liquid detergent, put it im- mediately before you start the pro- gramme.
Cancel a programme 1. Turn the programme knob to to cancel the programme and to deacti- vate the appliance. 2. Turn the programme knob again to ac- tivate the appliance. Now, you can set a new washing programme. The appliance does not drain t he wa- ter.
After each wash, keep the door open for a while to prevent moul d and to let unpleas- ant smells go out . Drum Regularly examine the drum to prevent limescale and rust particles. Only use special prod ucts to remove rust particles from the drum. To do this: • Clean the drum with special product for stainless steel.
1. Open the pump door. 2. Put a container below the recess of the drain pump to collect the water that flows out. 3. Unscrew the filter to let the water flow out. 4. When the container is full of water, screw the filter again and empty the container. Do steps 3 and 4 again and again until no more water flows out from the drain pump.
3. Clean the filter in the valve with a stiff brush or a towel. 4. Install again the inlet hose. Make sure that the couplings ar e tight to prevent leakages. 5. Open the water tap. Emergency drain Because of a malfunction, the appliance cannot drain the water.
Problem Possible ca use Possible solution The programme knob is not in the correct position. Turn the programme knob in the correct position. The delay start is set. It is available only for models with the Delay start. To start immediately the programme, cancel the delay start.
Problem Possible ca use Possible solution The applian ce fills with water and drain imme- diately. The end of the drain hose is too low. Make sure that the drain hose is in the correct position. Refer to 'Installation'. The washing results are not satisfactory.
3. Remove the internal film . 4. Open the door and remove all the items from the drum. 5. Put the front piece on the floor behind the appliance. Care fully put down the appliance with the rear side on it. M ake sure not to damage the h oses. 6. Remove the polystyrene protection from the bottom.
10. Replace the plasti c spacers with the large plastic caps. You can find these large caps in the user manual bag. Warning! Remove all the packaging and the transit bolts before you install the appliance. We recommend that you keep the packaging and the transit bolts for when you move the appliance.
With the plastic hose guide. • • On the edge of a sink. Make sure that the plastic guide cannot move when the appliance drains. Attach the guide to the water tap or the wall. • To a stand pipe with vent-hole. Refer to the illustration. Directly into a drain pipe at a height of not l ess than 60 cm and not more than 90 cm.
electrolux 19.
155219000-A-1 82011 www.electrolux.com/shop.
An important point after buying a device Electrolux EWS 1051 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux EWS 1051 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux EWS 1051 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux EWS 1051 you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux EWS 1051 will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux EWS 1051, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux EWS 1051.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux EWS 1051. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux EWS 1051 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
