Instruction/ maintenance manual of the product EWS 10470 W Electrolux
Go to page of 28
user manual Washing Machine EWS 10470 W.
Electrolux. Thinking of you. Share more of our thinki ng at www.electrolux.com Contents Safety information 2 Product description 4 Control panel 5 First use 7 Personalisation 7 Daily use 7 Helpful hints and tips 11 Washing programmes 13 Care and cleaning 16 What to do if.
Installation • This appliance is h eavy. Care should be taken when moving it. • When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre. • All packing and transit bolts must be re- moved before use.
Product description Your new appliance meets all modern requir ements for effective treatm ent of laundr y with low water, energy and detergent consum ption. Its new washing system allows total use of detergent and reduces wate r consumption so saving energy.
Control panel Below is a picture of the control panel. It shows the progra mme selector dial as well as the buttons, pilo t light and the display. These are presented by relevant numbers on the following pages.
This option is recommended for heavily soiled laundry. Extra Rinse This appliance is design ed for saving energy. If it necessary to rinse the laundry using an extra quantity of water (extra rinse), select this option. Some additional rinses will be performed.
• Wash • Rinses • Drain • Spin By selecting the wash programme, the pro- gramme phase icons corresponding to the various phases making up the programme are shown in the bottom part of the display. After having pressed button 8 only the icon of the running phase stays on.
Measure out the detergent and the fab- ric softener Pull out the dispenser dr awer until it stops. Measure out the amount of detergent re- quired, pour it into the main wash compart- ment or in the appropriate compartment if the selected programme/option it requires (see more details in «Detergent dispenser drawer»).
Reduce the spin speed by pressing button 3 By selecting a programme, the appliance proposes automatically the m aximum spin speed provided for that programme. Press button 3 repeatedly to change the spin speed, if you want your laun dry to be spun at a different speed.
Important! The Time Manager cannot be selected with the Econ omy programmes. The availability of these soil level icons change according to th e type of fabric as shown in the following chart.
blinking to indicate th at the appliance has to be switched off. By pr essing any button the appliance will come out from the energy sav- ing status and you can set another pro- gramme or switch the appliance off.
Mould stains: treat with bleach, rinse well (whites and fast coloureds only). Grass: soap lightly and treat with bleach (whites and fast coloureds only). Ball point pen and glue: moisten with ace- tone 1) , lay the garment on a soft cloth and dab the stain.
Washing programmes Programme - Maximum and Min imum Tempera- ture - Cycle Des cription - Maximum Spi n Speed - Maximum Fabrics Load - Type of Laundry Options Detergent Com- partment COTTONS 90° - Cold Main wash - Rinses Spin at the maximum speed Max.
Programme - Maximum and Min imum Tempera- ture - Cycle Des cription - Maximum Spi n Speed - Maximum Fabrics Load - Type of Laundry Options Detergent Com- partment SOAK 30° Prewash - Soak for about 40 minut es - Stop with water in the tub Max. load 6 kg Special programme for heavily soiled laundry.
Programme - Maximum and Min imum Tempera- ture - Cycle Des cription - Maximum Spi n Speed - Maximum Fabrics Load - Type of Laundry Options Detergent Com- partment CURTAINS 40° - Cold Prewash - Main wash - Rinses Maximum spin speed 700 rpm Max.
Care and cleaning Warning! You must disconnect the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine.
Washing drum Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron. Important! Do not clean the drum with acidic descaling agen ts, scouring agents containing chlorine or iron or steel wool. 1. Remove any rust deposits on the drum with a cleaning agent for stainless steel.
6. When no more water comes ou t, un- screw the pump cover, using a pliers, and remove the filter. Always keep a rag nearby to dry up spillage of water when removing the cover. 1 2 7. Remove any objects from the pump im- peller by rotating it. 8. Replace the filter in to the pump paying attention to insert it properly.
Warning! When the appliance is in use and depending on the programme selected there can be hot water in the pump. Nev er remove the pump cove r during a wash cycle, always wait until the appliance has finished the cycle, and is empty.
• Screw the hose back to the machine and make sure the connection is tight. • Turn on the water tap. Emergency emptying out If the water is not discharged, proceed as follows to empty out the machine: 1. pull out the plug fr om the power socket; 2.
Problem Possible ca use/Solution The machine doe s not start: The door has not been closed. E40 •C l o s e t h e d o o r f i r m l y . The plug is not properly inserted in th e power socket. • Insert the plug into the power socket. There is no power at the socket.
Problem Possible ca use/Solution The door wi ll not open: The programme is still running. • Wait the end of washing cycle. The door lock has not been released. • Wait until the pilot light 9 goes off. There is water in the drum. • Select drain or spin programme to empty out th e water.
Technical data Dimensions Width Height Depth Depth (Overall dimensions) 60 cm 85 cm 45 cm 48 cm Electrical connection Voltage - Overall power - Fuse Information on the electrical connect ion is given on the rating plate, on the inner edge of the appliance door.
2. Remove the power supply cable and the draining and inlet hose from the hose holders on the rear of the appliance. 3. Unscrew the three bolts. 4. Slide out the relevant plastic spacers. 5. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet.
Positioning Install the machine on a flat hard floor. Ma ke sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Le vel the washing ma- chine by raising or lowe ring the feet.
Water drainage The end of the drain hose can be positioned in three ways. • Hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this case, make sure the end cannot come unhooke d when the ma- chine is emptying. This could be done by tying it to the tap with a piece of string or attaching it to the wall.
Warning! The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1363/A) fuse must be used. The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution.
132952390 - 0 0 -242009 www.electrolux.com web portal 1 web portal 2.
An important point after buying a device Electrolux EWS 10470 W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux EWS 10470 W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux EWS 10470 W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux EWS 10470 W you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux EWS 10470 W will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux EWS 10470 W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux EWS 10470 W.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux EWS 10470 W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux EWS 10470 W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
