Instruction/ maintenance manual of the product EWN 1020 Electrolux
Go to page of 22
INSTR UCTION BOOKLET BR UKSANVISNING KÄYTTÖOHJE RUKOVODSTVO PO ÈKSPLUATACII W ASHING MA CHINE TVÄTTMASKIN PYYKINPESUK ONE STIRALWNAÅ MAfiINA EWN 820 EWN 1020 132 987 171 RU S FIN S GB 132987171_cop.
2 Dear customer , Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners.
ENGLISH W ar nings Installation • All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph in the instruction book.
4 Disposal Tips for envir onmental pr otection Packaging materials The materials marked with the symbol are recyclable. >PE< =polyethylene >PS< =polystyrene >PP< =polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers.
5 ENGLISH Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. Using a spanner, unscrew and remove the two rear bottom screws.
6 The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use. W ater drainage The end of the drain hose can be positioned in three ways: Hooked over the edge of a sink using the plastic hose guide supplied with the machine .
Y our new washing machine 7 This new washing machine meets all modern needs for effective treatment of laundry with low water, energy and detergent consumption. • The possibility of selecting the temperature, spin speed and all the options offered by this washing machine gives you truly “customised” washing.
8 Use 19 23 4 5 6 7 8 10 95 °C 60 °C 40 °C 30 °C 800 700 600 500 / Control panel 1 ON/OFF button Press this button to switch the washing machine on. Press the ON/OFF button again to switch the machine off. 2 MAINS-ON light This light is connected to the ON/OFF button .
ENGLISH RINSE HOLD position : when you choose this option, the machine will not drain the water of the last rinse, so as not to wrinkle the laundry. At the end of the cycle the door is locked, the light of the START/PAUSE button goes off, the pilot lights and remain lit, to indicate that the water must be drained.
- depress RESET once or repeatedly to cancel the previously performed programme (all the phase indicator lights must be off); - select the type of fabric by means of the relevant button; - select the special programme: • RINSES AND SPIN Depress RESET once , the pilot light / (PREWASH/WASH) goes out.
ENGLISH 11 W ashing hints Sorting the laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. T emperatures 95° for normally soiled white cottons and linen (e.
The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme. If using concentrated powder or liquid detergents, a programme without prewash must be selected. Pour liquid detergent into the dispenser drawer compartment marked just before starting the programme.
ENGLISH 13 International wash code symbols These symbols appear on f abric labels, in order to help you choose the best w ay to treat y our laundr y . Energetic wash Delicate wash Max. wash temperature 95°C Max. wash temperature 60°C Max. wash temperature 40°C Max.
4. Switch the machine on To switch the machine on, press the ON/OFF button : the mains-on light comes on. 5. Select the desired pr ogramme/ fabric Press the FABRIC button repeatedly, in order to select the desired programme/fabric. The relevant light will light up.
ENGLISH 15 10. How to change a programme during its cycle Before you make any change, you must pause the washing machine by pressing the START/PAUSE button. It is possible to change any option before the programme carries it out. Changing the type of fabric or temperature is possible, obviously, only by resetting it.
Pay attention to the level and temperature of the water in the washing machine! When you close the door and press the ON/OFF button again, the washing machine will resume the programme from the point where it had been interrupted. 13. End of programme The machine stops automatically.
ENGLISH 17 W ashing pr ogrammes * The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It refers to the highest temperature for each wash programme.
18 Maintenance Door seal Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold. Bodywork Clean the outside of the machine with warm water and a neutral, non-abrasive household detergent. Rinse with clean water and dry with a soft cloth.
ENGLISH 19 W ater inlet filter If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. Turn off the water tap. Unscrew the hose from the tap. Clean the filter with a stiff brush. Screw the hose back onto the tap.
Something not working? Problem Possible cause • The machine does not start up: • The door is not firmly closed. • The machine is not plugged in or there is no power at the socket. • The main fuse has blown. • The START/PAUSE button has not been depressed.
ENGLISH 21 If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. Mod. ..........
MADE IN EEC The Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.
An important point after buying a device Electrolux EWN 1020 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux EWN 1020 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux EWN 1020 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux EWN 1020 you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux EWN 1020 will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux EWN 1020, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux EWN 1020.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux EWN 1020. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux EWN 1020 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
