Instruction/ maintenance manual of the product ENB 36400 X Electrolux
Go to page of 20
user manual Fridge-Freezer ENB31400W ENB31400X ENB36400W ENB36400X.
Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Safety information 2 Control panel 4 First use 7 Daily use 7 Helpful hints and tips 10 Care and cleaning 11 What .
• It is dangerous to alter the specifications or modify this product in any way. Any dam- age to the cord may cause a short-circuit, fire and/or electric shock. Warning! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel.
Service • Any electrical work required to do the serv- icing of the appliance should be carried out by a qualified electrician or competent per- son. • This product must be serviced by an au- thorized Service Centre, and only genuine spare parts must be used.
Switching on Insert the plug into the power outlet. If the display is not illuminated, press button (A), to start the appliance. As soon as the appliance is turned on, the temperature flashes and you will hear a buz- zer. Press button (E) and the buzzer will switch off.
Ambient Temperature Function The ambient temperature function is activa- ted by pressing key (D) (several times if nec- essary) until the corresponding icon appears . In this condition the displayed temper- ature is the ambient temperature. You must confirm the choice by pressing key (E) within few seconds.
Temperature alarm Temperature increase in the freezer com- partment (for example due to an power fail- ure or door is open) is indicated by: • flashing temperature • flashing icon • acoustic buz.
Important! If the ambient temperature is high or the appliance is fully loaded, and the appliance is set to the lowest temperatures, it may run continuously causing frost to form on the rear wall. In this case the Temperature regulator must be set to a higher temperature to allow automatic defrosting and therefore reduced energy consumption.
This bottle holder shelf can be tilted in order to store previously opened bottles. To obtain this result, pull the shelf up so it can rotate upwards and be placed on the next higher level. Important! A few positions can't be used due to interference with the temperature sensor.
Helpful hints and tips Hints for energy saving • Do not open the door frequently or leave it open longer than absolutely necessary. • If the ambient temperature is high and the Temperature Regulator is set to low tem- perature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice on the evaporator.
make it possible subsequently to thaw only the quantity required; • wrap up the food in aluminium foil or pol- ythene and make sure that the packages are airtight; • do not allow fresh, unfrozen f.
Defrosting the refrigerator Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, dur- ing normal use. The defrost water drains out through a drain hole into a special container at the back of the appliance, over the motor compressor, where it evaporates.
Problem Possible cause Solution The appliance is noisy. The appliance is not supported properly. Check if the appliance stands sta- ble (all feet and wheels should be on the floor). Refer to "Levelling". The cushion spacers located be- tween the back of the cabinet and the pipes come loose.
Problem Possible cause Solution The food temperature is too high. Let the food temperature decrease to room temperature before stor- age. The temperature in the refrigeration is too warm. There is no cold air circulation in the appliance. Make sure that there is space be- tween food to allow air circulation.
Technical data ENB31400W ENB31400X ENB36400W ENB36400X Dimension Height 1800 mm 1800 mm 2000 mm 2000 mm Width 595 mm 595 mm 595 mm 595 mm Depth 623 mm 623 mm 623 mm 623 mm Rising Time 11 h 11 h 11 h 11 h The technical information are situated in the rating plate on the internal left side of the ap- pliance and in the energy label.
Removing the transport support Your appliance is equipped with transport support to secure the door during transpor- tation. To remove them do these steps: 1. Open the door. 2. Remove the transport support from the door sides. 3. Remove the transport support from the lower hinge (some models).
3. Lay the appliance back side down on a wooden support. 4. Unscrew the lower hinge and remove the lower door. 5. Unscrew and remove the front cover (a). Unscrew the hinge pin (b) and remove the upper door. Remove the two covers on the roof (c). 6. Remove the cover on the front (d).
9. Re-assembly the upper door. 10. Screw on the hinge pin (b) on the oppo- site side. 11. Re-assembly the covers (c) and (d) and the front cover (a). 12. Install the lower door and screw the low- er hinge by changing the position of the pin. 13. Tighten the hinge.
your household waste disposal service or the shop where you purchased the product. electrolux 19.
298376844-01-03012010 www.electrolux.com.
An important point after buying a device Electrolux ENB 36400 X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux ENB 36400 X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux ENB 36400 X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux ENB 36400 X you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux ENB 36400 X will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux ENB 36400 X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux ENB 36400 X.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux ENB 36400 X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux ENB 36400 X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
