Instruction/ maintenance manual of the product E36WC45FSS Electrolux
Go to page of 24
5995465548 U se & Car e Guide In stallation In struction s V ent Hood E36WC45FSS.
2 Finding Information PLEASE READ AND SA VE THIS GUIDE Thank you for choosing Electrolux , the new premium brand in home appliances. This Use & Care Guide is part of our commitment to customer satisfaction and product quality throughout the service life of your new hood.
3 PRODUCT REGISTRA TION INFORMA TION The package containing this manual also includes your product registration information. W arranty coverage begins at the time your Electrolux vent hood was purchased. If you received a damaged product, immediately contact your dealer or builder .
4 T ABLE OF CONTENTS Finding Information .............................................. 2 Please Read And Save This Guide ................... 2 Make A Record For Quick Reference ................ 2 Questions ............................................
5 Safety IMPORT ANT SAFETY INSTRUCTIONS Safety Precautions Do not attempt to install or operate your unit until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a W arning or Caution based on the risk type.
6 Safety General Precautions WARNING • T o reduce the risk of a range top grease fire: a) Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.
7 CA UTION • For general ventilating use only . Do not use to exhaust hazardous or explosive materials and vapors. • Do not store items of interest to children above or at the back of the cooktop or vent, as they could climb on the appliance to reach items and be injured.
8 CA UTION • For best capture of cooking impurities, the bottom of the hood should be a minimum of 24” and a maximum of 30” above the cooking surface. See “Install Mounting Bracket” section for mounting restrictions. • T wo installers are recommended because of the large size and weight of this hood.
9 Getting Started OPERA TING YOUR HOOD Controls The hood is operated using the (5) push-buttons located at eye-level, on the front edge of the hood. The light switch turns the halogen lights on and off.
10 Operation Halogen Bulbs This range hood requires two halogen bulbs (T ype JC, 12V olt, 20W att Max, G-4 Base). T o change bulbs: 1 Open the cover by prying from the proper slots. 2 Remove the bulb by pulling sideways. (DO NOT ROT A TE). 3 Replace with T ype JC, 12V olt, 20 Watt Max, G-4 Base halogen bulb.
1 1 Care and Cleaning CARING FOR YOUR RANGE HOOD Proper maintenance of the Range Hood will assure proper performance of the unit. Grease Filters The grease filters should be cleaned frequently . Use a warm detergent solution. Grease filters are dishwasher safe.
12 Installation CHECK CONTENTS Unpack hood and check contents. Y ou should receive: 1 - Hood 1 - Decorative Flue Assembly 1 - Parts Bag (B080810604) containing: 1 - Mounting Bracket 1 - Discharge Collar 1 - Flue Mounting Bracket 6 - Mounting Screws (4,8 x 38mm Pan Head) 7 - Mounting Screws (3,9 x 9,5mm Pan Head) 2 - Mounting Screws (3.
13 Installation INST ALL THE DUCTWORK 1 Decide where the ductwork will run between the hood and the outside. 2 A straight, short duct run will allow the hood to perform most efficiently . 3 Long duct runs, elbows, and transitions will reduce the performance of the hood.
14 Installation INST ALL THE MOUNTING BRACKET Ducted and Non-Ducted Hoods 1 Construct wood wall framing that is flush with interior surface of wall studs. Make sure: a the framing is centered over installation location. b the height of the framing will allow the mounting bracket to be secured to the framing within the dimensions shown.
15 Installation INST ALL THE FLUE MOUNTING BRACKET Ducted and Non-Ducted Hoods 1 Assemble the flue mounting bracket, adjusting outside width as shown. See Figure 8. 2 Carefully center the mounting bracket directly over the range hood location. 3 Secure the bracket assembly to the ceiling using (2) 4.
16 Installation PREP ARE THE HOOD Note: On stainless steel hoods, carefully remove the plastic protective film from all exterior surfaces of the hood and decorative flues, prior to final installation. Ducted Hoods Only 1. Remove the tape on the electrical system plate; place the electrical system plate on the hood (use a protection).
17 Installation Non-Ducted Hoods Only 1 Remove the tape on the electrical system plate; place the electrical system plate on the hood (use a protection). Figure 12 2 Discard discharge collar/damper supplied with the hood. Install the 5” to 6” adapter supplied with the Non-Ducted Recirculation Kit.
18 Installation INST ALL THE HOOD 1 Raise the hood into its mounting position. 2 Align the rectangular opening on the back of the hood with the wall-mounting bracket. Gently lower the hood until it securely engages the bracket. Figure 14. 3 Level the hood with (2) 3.
19 Installation 9 Carefully place the decorative flue on the hood. Figure 16. - On ducted installation in rooms with 8-foot ceilings, the air vents are concealed. Install the flue with the air vents down. - On non-ducted installations in rooms with 8-foot ceilings, the air vents are exposed.
20 Installation INST ALL THE FIL TERS Ducted and Non-Ducted Hoods 1 T o remove the GREASE filter , push in on the metal latch tab and tilt filter downward to remove. 2 T o install the GREASE filter , align rear filter tabs with slots in the hood. Depress the metal latch tab, push filter into position and release.
21 T roubleshooting IF SER VICE IS REQUIRED First, review the recommended checks listed in the T roubleshooting Guide . Then, be certain that the appliance has been installed properly and is being operated correctly . Familiarize yourself with the warranty terms and conditions listed in the W arranty section.
22 T roubleshooting TROUBLESHOOTING GUIDE IMPORT ANT Unnecessary service calls may be expensive, frustrating and time consuming. Before you call for service, please review the potential problems, possible causes and remedies shown in the table below .
23 Saving Energy ENERGY SA VING TIPS 1 Do not operate the blower at a speed that is higher than necessary to remove the cooking exhaust. Running at excessive speeds removes more air from the inside of the house that must be replaced by outside air . This may be especially costly when the housing air conditioning or heating system is in operation.
24 14 W a r r a n t y I n f o r m a t i o n HOO D WA RR AN TY Your hood i s pr otected by this war ranty WARRAN TY PERIOD THROU GH OUR AUTHORIZE D SERVICERS, WE WIL L: THE CON SUMER WILL BE RESPONS IBLE FOR: FULL ON E-YEAR WARRAN TY One y ear from original p urchase date .
An important point after buying a device Electrolux E36WC45FSS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux E36WC45FSS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux E36WC45FSS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux E36WC45FSS you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux E36WC45FSS will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux E36WC45FSS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux E36WC45FSS.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux E36WC45FSS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux E36WC45FSS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
