Instruction/ maintenance manual of the product E30GC64ESS Electrolux
Go to page of 20
Installation Instructions Installation Instructions Installation Instructions Installation Instructions Installation Instructions Cooktop 5995426250 E30GC64ESS E36GC65ESS E46GC66ESS E46GC67ESS.
2 Safety IMPORT ANT SAFETY INSTRUCTIONS Safety Precautions Do not attempt to install or operate your unit until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a W arning or Caution based on the risk type.
3 ! WARNING WARNING WARNING WARNING WARNING • Read all instructions before using the appliance. • Improper installation, adjustment, alteration, service, or maintenance can cause personal injury or property damage. Refer to these instructions and the accompanying Use & Care Manual.
4 Safety ! WARNING WARNING WARNING WARNING WARNING • Based on safety considerations, the top burner flame should be adjusted so it does not extend beyond the edge of the cooking utensil. • Cooking utensils should not be used on the open top broiler section.
5 Finding Information READ AND SA VE THESE INSTRUCTIONS Read all instructions before installing the cooktop. For your safety , please read and observe all safety instructions. This guide will help you anticipate all installation connections. QUESTIONS? For toll-free telephone support in the U.
6 Finding Information TABLE OF CONTENTS Safety ................................................................... 2 Definitions .......................................................... 2 Important Safety Instructions .............................. 2 Safety Precautions .
7 Prep aring for Inst allation VERIFY P ACKAGE CONTENTS • Use & Care Manual • Cleaning Kit • Hold Down Bracket Kit • Grill Drip Pan (E46GC67ESS only) • Grate/Burner Cap Pack • Grill U-.
8 Prep aring for Inst allation Plan the installation so that the electrical connection, gas shut-off valve, and pressure regulator are accessible from the front of the cabinet. IMPOR IMPOR IMPOR IMPOR IMPOR T T T T T ANT ANT ANT ANT ANT • When installing the cooktop into a laminated (Formica, etc.
9 30" (762mm) 21" (533mm) 4" (102mm) Chassis height 1/4" (6mm) Min. to combustibles below chassis 27 1/2" (699mm) 19 7/8" (505mm) 3 1/8" (79mm) 7 1/2" (191mm) Min. to combustible side wall above the cooktop (both sides) 2 1/4" (57mm) Min.
10 Making the Gas/Electric Connection REQUIREMENTS Gas Supply Requirements Check your local building codes for the proper method of installation. In the absence of local codes, this appliance should be installed in accordance with the National Fuel Gas Code ANSI Z223.
11 IMPOR IMPOR IMPOR IMPOR IMPOR T T T T T ANT ANT ANT ANT ANT • If the electrical supply circuit does not have a grounding-type receptacle, it is the responsibility of the customer to have the existing receptacle changed by an electrician to a properly grounded receptacle.
12 Inst allation INST ALLING THE COOKTOP Place and center the cooktop within the cutout. Secure the cooktop to the countertop utilizing the two (2) hold-down brackets provided. Do not overtighten the screws. See Figure 6 . CONNECTING THE GAS Attach the gas pressure regulator (included with the cooktop) to cooktop pipe nipple inlet.
13 Inst allation GAS AND ELECTRIC REQUIREMENTS TABLE Refer to the following table for more information on gas and electric requirements. Model No. E lectrical circuit required T otal connected load Gas type Manifold pressure Minimum gas supply pressure E30GC64ESS 120V AC , 60Hz, 15A 0.
14 Inst allation INST ALLING THE BURNER COMPONENTS Burner Components Remove the brass burner rings, porcelain burner caps, and porcelain grates from their shipping packages. Place each burner ring onto its corresponding burner base, being certain that the five alignment tabs slide into the matching notches in the base.
15 Inst allation MAKING THE ELECTRICAL CONNECTION Plug the three-prong plug from the appliance into the properly grounded and polarized wall receptacle. ! WARNING WARNING WARNING WARNING WARNING • Ensure that the power supply is disconnected before proceeding.
16 Operation VERIFYING THE OPERA TION Before beginning the test procedure, ensure that the gas supply is turned off at the shut-off valve, all cooktop control valves are in the “OFF” position, and all burner rings, burner caps, and grates are properly positioned on the cooktop.
17 Operation T urn on the main gas supply to the cooktop by opening the gas shut-off valve. T est each burner separately by pressing and turning one control knob at a time counterclockwise to the “HI/LITE” position. All ignitors will sp ark simultaneously .
.
.
1-877-4Electrolux www .electroluxusa.com www .electroluxca.com.
An important point after buying a device Electrolux E30GC64ESS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux E30GC64ESS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux E30GC64ESS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux E30GC64ESS you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux E30GC64ESS will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux E30GC64ESS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux E30GC64ESS.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux E30GC64ESS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux E30GC64ESS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
