Instruction/ maintenance manual of the product AH 360-120 Electrolux
Go to page of 16
Operating and assembly instructions AH 360-120 Extractor hood.
AH 360-120 1 Preface 1. Important notes Page 3-4 1.1 F or your safety Page 3 1.2 Operating for the first time Page 4 1.3 About use Page 4 2. Structure and operating principle Page 5-6 2.1 Structure of the appliance Page 5 2.2 Accessories/special accessories Page 5 2.
2 Preface With your new extractor hood, working in the kitchen will be even more fun. The appliance offers you a number of advantages : – effective extraction thanks to the so-called “Coanda effec.
3 1. Important notes 1.1 F or your safety Damaged appliances must not be operated. Connecting cables must not come into contact with hot cooking surfaces. Do not operate the extractor hood without inserted lamps. Never operate the appliance without a grease filter .
1.2 Operating for the first time Before operating the appliance for the first time, please pay attention to the following notes: The appliance must be installed and connected by a specialist before it is operated for the first time.
5 2. Structure and operating principle 2.1 Structure of the appliance 2.2 Accessories/special accessories Y ou can order the following special accessories: – Back draught flap RK 040-150: Back draught flap for insertion in the extractor ’s blow-out opening – Flexible aluminium pipe AR 040-150: DN 150 up to 3.
2.3 Operating principle This extractor hood swiftly and silently extracts all odours produced while cooking. Y ou can set different intensity levels depending on the intensity of odours. The fan in the extractor hood sucks in the kitchen vapours and passes them through the grease filter to outdoors.
3.1 Switching on and off Switching on – T urn the “V entilation level” control knob to the ventilation level you require (Fig. 6). – The set level is displayed. After a power failure , the extactor will not go on again automatically . Y ou can recommence operation by turning a knob or by pressing any key .
8 3.2 Special functions Intensive level Y ou should select the intensive level when browning and frying in an open pan. Switching on: (Fig. 9) – T urn the control knob to a ventilation level (1-3). – Press the intensive level key . The intensive level symbol appears on the display .
Cleaning the grease filters: The (Grease filter saturation) symbol flashes on the display after an operating time of 30 hours. Flashing of this symbol signals to you that the grease filters have to be cleaned. The grease filters can be cleaned at any time, even if the (Grease filter saturation) symbol does not flash.
Cleaning the glass plates Apply commercially available window cleaning agent with a soft, moist cloth. T o facilitate cleaning, you can detach the glass plates as follows: Detach the grease filters. In the extractor hood, you will find two openings on the upper side through which you can lift the glass plates singly with a blunt object (e.
11 First disconnect the appliance from the mains before carrying out any repairs. In the event of malfunctions, first of all check the household fuses. If the power supply is in proper working order , but the appliance is nevertheless not functioning, then please contact your specialist dealer or your responsible Gaggenau after -sales service.
12 6.1 T echnical data W eight: 41 kg without ventilation duct Dimensions: 1 198 x 560 mm Electrical connection Pay attention to the rating plate data.
Flexible aluminium pipes, corrosion-protected sheet metal pipes and exhaust air pipes whose material conforms to fire B1 in accordance with DIN 4102 can be used.
Proceed as follows: – From the bottom edge of the hood, mark a center line on the wall. – With the aid of the drilling template, mark the positions of the screws on the wall. Mark the contour of the hook-in area. This will make it easier to hook in the hood (Fig.
– Secure the hood to the wall using the 4 screws b (Fig. 18). – Establish the pipe connection. – Establish the electrical connection. – Extract the protective file from the chimney paneling. Note: A void damaging the sensitive stainless steel surfaces.
An important point after buying a device Electrolux AH 360-120 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux AH 360-120 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux AH 360-120 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux AH 360-120 you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux AH 360-120 will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux AH 360-120, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux AH 360-120.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux AH 360-120. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux AH 360-120 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
