Instruction/ maintenance manual of the product 86000 i Electrolux
Go to page of 28
SANT O U 86000 i Built-In Refriger ator Oper ating and Installation Instructions.
2 Dear customer , Before placing your new r efrigerator/fr eezer into operation please r ead these operating instructions car efully . They contain important informa- tion for safe use, for installation and for care of the appliance. Please keep these operating instructions for futur e refer ence.
3 Contents Important Safety Instruction s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Dis posal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appliance P ackaging Information .
4 Important Safety Instructions These warnings ar e provided in the inter ests of your s afety . Ensur e you fully understand them befor e installing or u sing the appliance. Y our safety i s of paramount importance. If you ar e unsure about the meaning of these warnings contact the Cu stomer Care Department for assi stance.
Important Safety Instructions 5 • Please make old appliances unusable prior to disposal. Pull out the mains plug, cut off the mains cable, break or r emove spring or bolt catches, if fitted.
Disposal Appliance P ackaging Information All materials are envir onmentally sound! They can be disposed of or burned at an incinerating plant without danger . About the materials: The plastics can be recycled and ar e identified as follows: >PE< for polyethylene, e.
7 Installation Installation Location The appliance should be set up in a well ventilated, dry room. Energy use is affected by the ambient temper ature.
Installation 8 Grid pr eparation The side at which the door opens can be changed from the right side (as supplied) to the left side, if the installation site requir es. Warning! When changing the side at which the door opens, r emove plug from the mains.
Installation 9 6 8 7 2 3 10 11 9 12 13 Warning! After completion of the door rever sing opera- tion, check that the door gasket adheres to the cabi- net. If the ambient temper- ature is cold (i.e. in Winter), the gasket may not fit per- fectly to the cabinet.
Installation 10 Installation kit ☞ Building the appliance in under a worktop The dimensions of the recessed installation area must corr espond with those indicated in the figure. ☞ 600 550 min. 600 1 1xA 12 1xB 2xC 2 2 1 1 2 2. To fit these br ackets remove the two scr ews at the top left and right hand front corner s of the cabinet.
4. Push the appliance into place. The plug socket nec- essary for connection of the appliance to the elec- tricity supply should be positioned, so that the plug is not placed in the recess. To adjust the height pr o- ceed as follows: 5. Loosen or tighten the two front feet.
4 11 5 ° 9. To mount the furnitur e door proceed as shown in the fig- ures: Installation 12 6 a b 10 1 2 3 4 C 8. Push the appliance into place and r etain the cab- inet with screws thr ough the securing brackets into the worktop or adjacent woodwork as necessary .
7 8 ab clic clic c C C Installation 13.
Installation 14 Upper part of kitchen furniture panel Lower part of kitchen furniture panel 9/a 275 275 max 100 11 = = 10 9 b a = = 1 2 10 1 2 3 45 °.
10. Refit the covering strip. 13 A Installation 15 12.
Installation 16 Fitting the plinth Important! For the efficient operation of the appliance, it is important that the original ventilation grid is used. • For an opening height dimension A=820 mm and a plinth height dimension a=1 00 mm, the plinth may be fitted without adjustments.
Installation Electrical Connection Any electrical work requir ed to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED The manufacturer declines any liability s hould these safety mea- sures not be observed.
18 ➀ ➁ ➂ ➃ ➄ ➅ Description of the appliance View of the appliance ➀ Butter/cheese compartment ➁ Sliding shelf ➂ Bottle shelf ➃ Vegetable dr awers ➄ Storage shelves ➅ Thermostat Prior to Initial Start–Up Please clean the appliance interior and all accessories prior to initial start-up (see section: “Cleaning and Care”).
19 Starting up and temper ature r egulation Important! Only use the appliance when built–in! ☞ 1. Connect the appliance to the mains electricity supply . When the refriger ator compartment door is opened, the internal light- ing is switched on. The temperatur e control knob is located on the right hand side of the refriger ator compartment.
20 Switching off the appliance To switch off the appliance, turn the temper ature r egulator to position "0". If the appliance is not going to be u sed for an extended period: ☞ 1. Remove all refriger ated packages. 2. Switch off the appliance by turning the thermostat knob to position "0".
Defr osting The fridge defr osts automatically The rear wall of the fridge cover s with frost when the compr essor is running, and defrosts when the compr essor is off. The water from the thawing frost evapor ates by itself. Corr ect storage For physical reasons, ther e are differ ent temperatur e regions in the fridge.
22 Cleaning and Car e For hygienic reasons the appliance interior , including interior acces- sories, should be cleaned regularly . Warning! • The appliance must not be connected to the mains during cleaning.
An accumulation of dust will affect the performance of the appliance and cause excessive electricity consump- tion. The structure of the appliance permits you to clean the rear zone close to the wall, using a vacuum cleaner . ☞ 1. Remove the plinth (1), then the venti- lation grid (2); 2.
What to do if ... 24 The compressor does not start immediately after changing the temperatur e setting. This is normal, no error has occurred. Water in the bottom of the cabinet. Water dr ain hole is blocked. See the “Cleaning and Care” section. The compressor starts after a period of time.
25 Changing the light bulb Warning! Ther e is a risk of electric shocks! Before changing the light bulb , switch off the appliance and unplug it, or disconnect from the power supply . Light bulb data: 220-240 V, max. 15 W ☞ 1. To switch off the appliance, turn the thermostat knob to position "0".
26 Regulations , Standards , Guidelines This appliance was designed for household use and was manufactured in accordance with the appr opriate standards.
27 T echnical terminology • Refrigerant Liquids that can be used to a generate a cooling effect ar e known as refriger ants. They have a relatively low boiling-point, indeed so low , that the warmth from the food stor ed in the fridge or freezer can cause the refriger ant to boil and vaporise.
AEG Hausgeräte GmbH P ostfach 1 036 D-90327 Nürnberg http://www .aeg.hausgeraete.de © Electrolux plc 2003 2222 682-15 -02- 0 203 Subject to change without notice.
An important point after buying a device Electrolux 86000 i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux 86000 i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux 86000 i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux 86000 i you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux 86000 i will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux 86000 i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux 86000 i.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux 86000 i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux 86000 i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
