Instruction/ maintenance manual of the product 36 Electrolux
Go to page of 26
3 18 200 647 (0 7 0 1) Dishwasher Use & Care Guide Electric Cooktop.
2 Finding Information MAKE A RECORD FOR FUTURE USE Brand_______________________________________________________________ Purchase Date______________________________________________________ Model Number.
3 Finding Information TABLE OF CONTENTS Finding Information ........................................... 2-3 Make a Record for Future use ................................ 2 Questions? .............................................................. 2 Safety .
4 Safety IMPORT ANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. Save these instructions for future reference. • Remove all t ape and p ackaging wrap before using the appliance. Destroy the carton and plastic bags after unp acking the appliance.
5 Safety • Do not leave children alone. Children should not be lef t alone or unattended in the area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance. • DO NOT TOUCH SURF ACE UNITS OR AREAS NEAR THESE UNITS.
6 Safety • Utensil Handles Should Be Turned Inward and Not Extend Over Adjacent Surface Units . To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil. • Never Leave Surface Units Unattended.
7 COOKT OP FEA TURES ! CA CA CA CA CA UTION UTION UTION UTION UTION The Cooking Zones may appear to be cool while turned ON and after they have been turned OFF. The glass surface may be HOT form residual heat transferred from the cookware and burns may occur.
8 6. Left Front Element Control Pads 7. Left Rear Element Control Pads 8. Right Rear Element Control Pads 9. Right Front Element Control Pads 10. Main Cooktop Controls 1 1. Center Front Element Control Pads (36” model only) 12. Minute T imer Key Pads 13.
9 Setting Surface Controls ABOUT THE CERAMIC GLASS COOKT OP NO NO NO NO NO TE TE TE TE TE Radiant elements have a limiter that allows the element to cycle ON and OFF, even at the HI setting.
10 Setting Surface Controls LOCA TIONS OF THE SURF ACE RADIANT ELEMENTS Your cooktop is equipped with radiant surface burners with different wattage ratings. The ability to heat food quicker and in larger volumes increases as the element wattage increases.
11 LED MESSAGES OR LIGHT INDICA T ORS DISPLA YED BY MAIN CONTROL CONTROLS LOCK - This feature allows the cooktop to be locked at anytime. T ouch and hold the LOCK key pad for few seconds. If the cooktop is in use, it will be impossible to enter in the lock mode.
12 Setting Surface Controls THE RECOMMENDED SURF ACE COOKING SETTINGS Use the chart to determine the correct setting for the type of food you are preparing. LIGHT INDICA T ORS DISPLA YED BY COOKING ELEMENT CONTROLS ELEMENT SIZE INDICA TOR LIGHTS - Some cooking elements of fer 2 or 3 different element sizes.
13 Setting Surface Controls OPERA TING THE SINGLE SURF ACE RADIANT ELEMENTS ! CA CA CA CA CA UTION UTION UTION UTION UTION Radiant surface elements may appear to have cooled after they have been turned OFF. The Hot Surface Indicator Light will turn ON and will continue to glow until the glass cooktop has cooled down to a moderate level.
14 Setting Surface Controls OPERA TING THE DUAL SURF ACE RADIANT ELEMENT Both the 30” and 36” cooktops are equipped with dual radiant surface element located as shown in Figs. 1 & 2. A touch key pad on the element controls is used to select one of the 2 positions of the element.
15 Setting Surface Controls OPERA TING THE TRIPLE SURF ACE RADIANT ELEMENT Both the 30” and 36” cooktops are equipped with “Triple” surface radiant elements located as shown in Figs. 1 & 2. A touch key pad on the element controls is used to select one of the 3 positions of the element.
16 Setting Surface Controls KEEP W ARM FEA TURE The Warm feature may be used with any of the Cooking Elements. To Turn the Keep Warm Feature ON: 1. To select the Keep Warm feature for any Cooking Element touch the ON OFF key pad for the corresponding Cooking Element.
17 LOCKING THE CONTROLS Setting Surface Controls The Cooktop Controls may be locked in order to prevent the cooktop from accidentally being turned ON. This feature can be activated only when no cooking zone is active. MINUTE TIMER The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping track of time.
18 Setting Surface Controls SURF ACE COOKING UTENSILS POOR • Curved and warped pan bot- toms. • Pan overhangs unit by more than 2.5 cm (1”). • Heavy handle tilts p an. • Pan is smaller than element. GOOD • Flat bottom and straight sides . • T ight fitting lids.
19 CARE & CLEANING TABLE General Care & Cleaning Surfaces Aluminum & Vinyl Painted and Plastic Control Knobs Stainless Steel , Chrome Control Panel, Decorative Trim How to Clean Use hot, soapy water and a cloth. Dry with a clean cloth. Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar and water.
20 Consistent and proper cleaning is essential to maintaining your ceramic glass cooktop ! CA CA CA CA CA UTION UTION UTION UTION UTION Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop is COOL. ! WARNING WARNING WARNING WARNING WARNING DO NOT use a cooktop cleaner on a hot cooktop.
21 General Care & Cleaning CLEANING RECOMMENDA TIONS FOR THE CERAMIC GLASS COOKT OP (CONTINUED) Plastic or foods with a high sugar content: These types of soils must be removed immediately if spilled or melted onto the ceramic cooktop surface. Permanent damage (such as pitting of the cooktop surface) may occur if not removed immediately .
22 Solutions to Common Problems ENTIRE COOKTOP DOES NOT OPERA TE • House fuse has blown or circuit breaker has tripped. Check/reset breaker or replace fuse. If the problem is a circuit overload, have this situation corrected by a qualified electrician.
23 Solutions to Common Problems FOOD NOT HEA TING EVENL Y • Improper cookware. Select flat-bottomed cookware of a proper size to fit element. • Incorrect control setting. Raise or lower setting until proper amount of heat is obtained. POOR COOKING RESUL TS • Many factors af fect cooking result s.
24 Solutions to Common Problems BROWN STREAKS AND SPECKS ON CERAMIC GLASS COOKT OP SURF ACE • Boilovers have cooked onto surface. Use razor blade scraper to remove soil. See instructions under General Care & Cleaning. • Cleaning materials not recommended for ceramic-glass cooktop have been used.
25 Notes.
26 W arranty Information Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will repair or replace any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used, and maintained in accordance with the provided instructions.
An important point after buying a device Electrolux 36 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux 36 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux 36 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux 36 you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux 36 will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux 36, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux 36.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux 36. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux 36 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
