Instruction/ maintenance manual of the product Sx600 Electro-Voice
Go to page of 16
Electro-V oice ® Sx600 User Manual.
Electro-V oice ® T able of Contents Product Description ................................................................................. 1 Important Features .................................................................................. 1 Product Feature Identification .
Electro-V oice ® Product Description The Sx600 Series is a remarkably flexible indoor/outdoor speaker system designed to produce high-fidelity high-level audio in distributed applications such as stadiums, ra cetracks, amusement parks, fairgrounds, etc.
Electro-V oice ® Product Feature Identification Figure 1: Sx600 Product Features S tainless S teel SuperSAM TM Mounting Bracket SuperSAM TM Down Angle Adjustment (0°- 60° in 5° Increments) Ful.
Electro-V oice ® System Acoustic Design Considerations Direct radiator acoustic systems can offer great vocal band clarity but dont usually of fer the ef ficiency and directivity of horn loaded systems.
Electro-V oice ® Installation Precautions This document det ails general mounting practices appropriate to the entertainment industry , as they would apply to the mounting of Electro- V oice Sx600 loudspeaker systems. It is intended to familiarize the reader with mounting hardware and techniques for suspending Sx600 loud- speaker systems overhead.
Electro-V oice ® 5 Block W all Mounting Do not attempt to mount an Sx600 to a block or brick wall without through-bolts and large, heavy steel backing plates on both sides of the wall. On poured concrete walls use deep ½ inch diameter anchors that cannot be pulled out once set.
Electro-V oice ® Stud W all Mounting First determine whether the structural members in the wall can withstand not only the weight of the Sx600, but also the side-to-side stresses of heavy cross-winds. Reinforce both sides of the wall with heavy plates, ¾ inch marine plywood minimum, and use through bolts.
Electro-V oice ® Installation Procedure S tep 1: Selection and Preparation of the Mounting Surface Surface must be clean and smooth. It must also be a material that is not easily crushed.
Electro-V oice ® S tep 4: Completing the Electrical Connections T rim the SJO cord to a neat length while allowing enough slack for future aiming adjustment s or service. Make electrical connections per all applicable codes in a weather-tight box and secure the SJO cord through a weather-tight gland nut.
Electro-V oice ® Selecting W att age T a p s The Sx600 is intended to be a high level speaker , so the transformer taps are set up to produce a full 600 watts at each of the 4 voltages listed. If necessary , the wattage may be halved by selecting the next HIGHER volt age tap.
Electro-V oice ® S tep 5: System Adjustment and Acoustic Tuning The Sx600 MUST BE HI-P ASSED at 90Hz using a minimum slope of 12dB/octave with a Q of 1.
Electro-V oice ® 11 System shut s down when driven hard. 1.) Insufficient amplifier power . Amplifier goes into protect mode due to overcurrent or thermal stress.
Electro-V oice ® 12 the microphone and use a good compressor/limiter to compensate for variances in microphone distance and excitement. Appendix B: Warranty S tatement Electro-V oice® product s are .
Electro-V oice ® 13 not apply to burned voice coils or malfunctions such as cone and/or coil damage resulting from improperly designed enclosures. Electro-V oice® active electronics associated with the speaker systems are guaranteed for three (3) years from the date of original purchase.
Electro-V oice ® U.S.A. and Canada: For customer orders, contact the Customer Service department at: 800/392-3497 Fax: 800/955-6831 For warranty repair or service information, contact the Service Rep.
An important point after buying a device Electro-Voice Sx600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electro-Voice Sx600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electro-Voice Sx600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electro-Voice Sx600 you will learn all the available features of the product, as well as information on its operation. The information that you get Electro-Voice Sx600 will certainly help you make a decision on the purchase.
If you already are a holder of Electro-Voice Sx600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electro-Voice Sx600.
However, one of the most important roles played by the user manual is to help in solving problems with Electro-Voice Sx600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electro-Voice Sx600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
