Instruction/ maintenance manual of the product 2181F Electro-Voice
Go to page of 8
Xi-2181/2181F X-Array™ Install Bass System • Unprecedented acoustic output in a small, lightweight package • Ring-Mode Decoupling (RMD)™ provides accurate transient detail • EVX-180B woofers.
Xi-2181 Bass System Xi-2181 Bass System 2 ing its sonic integrity from the very-lowest sound pressure levels to the very-highest sound pressure levels. This means that the front-of-house engineer will not have to re- tune the EQ and level settings as the SPL is increased throughout the show .
Xi-2181 Bass System Xi-2181 Bass System 3 quickly , and of fers such flexibility in the vertical angling of cabinets that pull-up points are usually unnecessary . Furthermore, all of the flying Xi loudspeaker models in- clude the same rigging hardware, allowing different models to be mixed as necessary throughout an array .
Xi-2181 Bass System Xi-2181 Bass System 4 V ertical Horizontal 5 dB per division Xi-2181 Bass System 63 Hz 80 Hz 125 Hz 200 Hz 160 Hz 100 Hz tro-V oice shall not be liable for any incidental or consequential damages including, without limitation, injury to persons or property or loss of use.
Xi-2181 Bass System Xi-2181 Bass System 5 Xi-2181 Bass System DIRECTIVITY F A CT OR R θ Q Without Crossover and EQ With Cro sso ver and EQ Figure 4 — Directivity The directivity index, D i , and directivity fac- tor , R , of the Xi-2181 were measured with a full- spherical measurement system as de- scribed in Figure 1.
Xi-2181 Bass System Xi-2181 Bass System 6 Figure 7 — Wiring Diagram The wiring diagram of each frequency band of the Xi is shown. Figure 6 — Impedance The impedance of each frequency band of the X.
Xi-2181 Bass System Xi-2181 Bass System 7 Figure 8—Dimensions.
Xi-2181 Bass System Xi-2181 Bass System 8 600 Cecil Street, Buchanan, MI 49107 616/695-6831, 616/695-1304 Fax Specifications Frequency Response (measur ed in far field, with and without crossover and equalization, calculated to one meter on axis, swept sine wave, one watt into system - 2.
An important point after buying a device Electro-Voice 2181F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electro-Voice 2181F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electro-Voice 2181F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electro-Voice 2181F you will learn all the available features of the product, as well as information on its operation. The information that you get Electro-Voice 2181F will certainly help you make a decision on the purchase.
If you already are a holder of Electro-Voice 2181F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electro-Voice 2181F.
However, one of the most important roles played by the user manual is to help in solving problems with Electro-Voice 2181F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electro-Voice 2181F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
