Instruction/ maintenance manual of the product RMD-1220 Elation Professional
Go to page of 12
24-004-2355-00 Rev1.0 User Instructions RMD-1220 It is important to read this instruction book prior to installing or using your new p roduct for the first time.
General Introduction...................................................................2 Overview .....................................................................................4 Operation Guide...................................................
ENTER MENU ESC 7) SETUP 19. When selected Silent, The Fans are running in lower speed and the temperature not higher than 90 degree C. 20. T ap ENTER button to save your set or use ESC button to exit without record. 18. When selected Full On,all the time the Fans keep in full speed on.
Thanks for you purchasing Botex RMD-1220 Rack Mount Dimmer . RMD-1220 is designed to build and expand your lighting control console.It is compact, portable and easy to operate by menus.
10. T ap UP/DOWN button to scroll the GoScene## from 01~99. 1 1. In ArtNET Failed menu, you can tap ENTER button to save your set or use ESC button to exit without record. 9. When selected GoScene##, tap >> button to activate cursor . 8. In this page, tap UP/DOWN button to scroll Off, Hold, 7.
Overview Front View -4- POWER DMX ArtNET Rack Mount Dimmer - 12 channel, 20 Amps per channel 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 11 Operation Guide 1. T ap UP/DOWN to scroll SETUP menu. 2. T ap >> button to select the mode you want enter in.
2. T ap ENTER button to enter CURVES menu. The cursor is blinking on bar 1. 4. T ap UP/DOWN button to select , and tap ENTER button to save your setup. The LCD page will back to step 1. Linear , Square or NO-DIM 3. Y ou can tap >> button to move cursor from bar 1 to bar 12.
Overview Rear View 3. Power Input Single phase input:AC 120V~60Hz,total 75A 1. DMX Input The XLR connector is used to receive an incoming DMX signal 2.
Operation Guide 5) PLA Y SCENE 1. T ap UP/DOWN button scroll to PLA Y SCENE menu to perform scene out. 2. In this menu, there are 2 sub-menus, Chase and Scene. Y ou can tap >> button to select the sub-menu you want to enter in. 3. T ap ENTER button to enter Chase.
Operation Guide Power on this unit, the POWER led will be lit and the LCD shows "Initialize...", then enter Home(Live Display) mode automatically . Home as the ROOT position, except LOCAL CONTROL and PLA Y SCENE, all menu pages will jump to Home page after free hand for 5 seconds.
Operation Guide 4) Scenes REC 1. T ap UP/DOWN button to scroll to SCENES REC menu. 2. T ap >> button to swap sub-menu between Copy and Assign. 3. T ap ENTER button to enter the Sub-menu you selected, and tap UP/DOWN button to scroll scene number .
Operation Guide 2. T ap >> button to select sub-menu DMX-512A or ArtNET . 6. -10- ENTER MENU ESC ENTER MENU ESC ENTER MENU ESC ENTER MENU ESC ADDRESS ArtNET 3. T ap ENTER button to enter DMX-512A sub-menu. ENTER MENU ESC ADDRESS[DMX] Start:001 ADDRESS[DMX] Start:001 ENTER MENU ESC ADDRESS[DMX] Start:001 4.
An important point after buying a device Elation Professional RMD-1220 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Elation Professional RMD-1220 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Elation Professional RMD-1220 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Elation Professional RMD-1220 you will learn all the available features of the product, as well as information on its operation. The information that you get Elation Professional RMD-1220 will certainly help you make a decision on the purchase.
If you already are a holder of Elation Professional RMD-1220, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Elation Professional RMD-1220.
However, one of the most important roles played by the user manual is to help in solving problems with Elation Professional RMD-1220. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Elation Professional RMD-1220 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
