Instruction/ maintenance manual of the product MX240W Eizo
Go to page of 40
Impor tant Ple ase re ad thi s U ser ’ s M an ual ca ref ull y t o f amili ariz e y our sel f w ith sa f e and ef f ectiv e usa ge pro ced ure s . Ple ase re tai n t his ma nu al f or fu tur e ref ere nce . About TCO'03 ........................
2 SAFETY SYMBOLS SAFETY SYMBOLS This manual uses the saf ety symbols below . The y denote critical information. Please read them carefully . W ARNING F ailure to abide by the information in a W ARNING may result in ser ious injur y and can be lif e threatening.
PRECA UTIONS 3 PRECA UTIONS IMPOR T ANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications.
4 PRECA UTIONS W ARNING Place the unit at the strong and stab le place . A unit placed on an inadequate surface may f all and result in injur y or equipment damage. If the unit f alls, disconnect the power immediately and ask your dealer for advice. Do not continue using a damaged unit.
PRECA UTIONS 5 W ARNING When attaching an arm stand, please refer to the user's manual of the arm stand and install the unit securely . Not doing so ma y cause the unit to come unattached, which may result in injur y or equipment damage. When the unit is dropped, please ask your dealer for advice.
6 PRECA UTIONS LCD P anel In order to suppress the luminosity change b y long-ter m use and to maintain the stable luminosity , use of a monitor in low er br ightness is recommended.
1. Introduction 7 1. Intr oduction Thank you very much for choosing an EIZO Color Monitor . 1-1. Features • 24" wide format LCD • Applicable to HDCP • Dual inputs compliant (DVI-I x 2) • .
8 1. Introduction 1-2. Buttons and Indicator s 1 2 4 5 6 7 8 3 9 1. Sensor (BrightRegulator) 2. Adjustment Lock button 3. Input Signal Selection button 4. Mode button 5. Auto Adjustment button 6. Enter button 7. Control buttons (Left, Down, Up, Right) 8.
1. Introduction 9 1-3. Utility Disk An "EIZO LCD Utility Disk" (CD-ROM) is supplied with the monitor . The following table shows the disk contents and the overview of the application software programs.
10 2. Installation 2. Installation 2-1. Connecting T w o PCs to the Monitor T wo PCs can be connected to the monitor through the DVI-I connector on the back of the monitor . Connection examples PC 1 PC 2 (Ex.1) Digital D VI Signal Cable (FD-C39 enclosed) Signal Cable (FD-C16 enclosed) D-Sub mini 15 pin Analog (Ex.
2. Installation 11 2-2. Making Use of USB (Univer sal Serial Bus) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected.
12 3. Screen Adjustment and Settings 3. Screen Adjustment and Settings 3-1. Basic Operation and Functions Adjustment menu allows you to adjust screen performance though the main menu and select a CAL Switch mode easily . NO TE • The Adjustment menu and the CAL Switch mode name cannot be displayed at the same time.
3. Screen Adjustment and Settings 13 Functions The following table shows all the Adjustmet menu's adjustment and setting menus. " * " indicates adjustments of analog input only and " ** " indicates digital input only . Main menu Sub menu Reference Screen Clock * 3-2.
14 3. Screen Adjustment and Settings 3-2. Screen Adjustment NO TE • Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments.
3. Screen Adjustment and Settings 15 3 Adjust by using <Screen> menu in the Adjustment menu. (1)V ertical bars appear on the screen Use the <Clock> adjustment. Select the <Clock> and eliminate the vertical bars by using and of the Control buttons.
16 3. Screen Adjustment and Settings (4)Screen image is smaller or larger than the actual screen images. Use the <Resolution> adjustment. Adjustment is needed when the input signal resolution and the resolution now being displayed are different.
3. Screen Adjustment and Settings 17 3-3. Color Adjustment Simple adjustment [CAL Switch mode] This function allows you to select the best display mode for monitor brightness, etc. T o select CAL Switch mode Directly pressing allows you to select the best suited mode for screen display from 4 CAL Switch modes; DICOM-CL, T ext, Custom and CAL.
18 3. Screen Adjustment and Settings Adv anced Adjustments[Adjustment menu] Color settings of each CAL Switch mode can be adjusted and saved by using the <Color> menu of the Adjustment menu. In the analog input, perf or m the "Range Adjustment" bef ore making the color adjust ments.
3. Screen Adjustment and Settings 19 Adjustment Contents Menu Function Descriptions Adjustable range Brightness T o set the brightness of the screen 0~100% Tips • The values sho wn in the “%” are av ailable only as ref erence.
20 3. Screen Adjustment and Settings 3-4. P o wer -save Setup The <PowerManager> menu in the Adjustment menu enables to set the power -save setup. NO TE • Do your part to conserve energy , turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely .
3. Screen Adjustment and Settings 21 3-5. Off Timer The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed. This function was created to reduce Afterimage characteristics that are particular to LCD monitors when the monitor screen is left on for a long period without use.
22 3. Screen Adjustment and Settings 3-7. P o wer Indicator Setting Light off the power indicator . This function is available for the multiple panels settings. [Procedure] 1. Select <Power Indicator> in the Adjustment menu <Others> menu. 2.
3. Screen Adjustment and Settings 23 3-9. Displa ying Lo wer Resolutions The lower resolutions are enlarged to full screen automatically . Using the <Screen Size> function in the <Others> menu enables to change the screen size. 1 Enlarge the screen size when displaying a low resolution.
24 3. Screen Adjustment and Settings 3 Set the brightness of the black area surrounding the displayed image. Set the <Border Intensity>. In the <Enlarge> mode or <Full Screen> mode, the outer area (border) is usually black. Select <BorderIntensity> in the <Others> menu and adjust by using .
4. T roubleshooting 25 4.T r oubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer . • No-picture problems : See No.1 - No.2 • Imaging problems : See No.3 - No.14 • Other problems : See No.15 - No.
26 4. T roubleshooting Prob lems P ossible cause and remed y 3. Displa y position is incorrect. • Adjust image position so that it is display ed properly within the displa y area using the <P osition> adjustment (page 15). • Adjust image position so that it is display ed properly within the displa y area using the "Hor .
4. T roubleshooting 27 Prob lems P ossible cause and remed y 14.Noise appears on the screen. • When enter ing the signals of analog input, select 1 to 4 in <Signal Filter> from the <Screen> menu to change the mode. • When enter ing the signals of HDCP system, the nor mal images ma y not be display ed immediately .
28 5. Reference 5. Reference 5-1. Attaching an arm The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the LCD monitor . NO TE • If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers before selecting.
5. Reference 29 5-2. Cleaning Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NO TE • Never use thinner , benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel.
30 5. Reference 5-3. Specifications LCD P anel 61 cm (24.1 inch), TFT color LCD panel Surf ace treatment : Anti-Glare Hard Coating Surf ace hardness : 3H Response Time : 16ms Viewing Angle Horizontal : 178°, V er tical : 178° (CR: 10 or more) Dot Pitch 0.
5. Reference 31 Default settings Smoothing 3 CAL Switch Mode DICOM-CL P ow erManager Analog input : VESA DPMS Digital input:D VI DMPM Screen Size Full Off Timer Disable Menu Settings Menu Siz e Normal Menu Off Timer 45 seconds BrightRegulator Disable Language English Dimensions 566(22.
32 5. Reference Pin Assignment •D VI-I Connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 19 20 21 17 18 22 23 24 C1 C2 C3 C4 C5 Pin No. Signal Pin No.
5. Reference 33 5-4. Glossary Clock With the analog input signal display , the analog signal is converted to a digital signal by the LCD circuitry . T o convert the signal correctly , the LCD monitor needs to produce the same number clock pulse as the dot clock of the graphics system.
34 5. Reference Resolution The LCD panel consists of a fixed number of pixel elements which are illuminated to form the screen image. This monitor consists of 1920 horizontal pixels and 1200 vertical pixels. At a resolution of 1920 x 1200 , all pixels are displayed as a full screen.
6. APPENDIX/ANHANG/ANNEXE 35 6. APPENDIX/ANHANG/ANNEXE Preset Timing Chart for Analog input Timing-Übersic hten für Analog Eingang Synchr onisation des Signaux pour Analog numerique NO TE • Based on the signal diagram shown below factory presets have been registered in the monitor's microprocessor .
36 6. APPENDIX/ANHANG/ANNEXE Mode Dot Clock MHz F requencies Sync P olarity Horizontal:kHz V er tical:Hz VESA 1600×1200@70Hz 189.0 MHz Hor izontal 87.50 P ositive V er tical 70.00 Positiv e VESA 1600×1200@75Hz 202.5 MHz Hor izontal 93.75 P ositive V er tical 75.
37 Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
38 For U.S.A. , Canada, etc. (rated 100-120 V ac) Only FCC Declaration of Conformity W e, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 W arland Drive, Cypress, CA 90630 Phone: (562) 431-501 1 declare that the pr oduct T rade name: EIZO Model: FlexScan MX240W is in conformity with Part 15 of the FCC Rules.
39 Hinweise zur Auswahl des richtigen Schwenkarms für Ihr en Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. W enn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden.
1st Edition-September , 2007 03V22216A1 (U.M-MX240W).
An important point after buying a device Eizo MX240W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eizo MX240W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eizo MX240W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eizo MX240W you will learn all the available features of the product, as well as information on its operation. The information that you get Eizo MX240W will certainly help you make a decision on the purchase.
If you already are a holder of Eizo MX240W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eizo MX240W.
However, one of the most important roles played by the user manual is to help in solving problems with Eizo MX240W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eizo MX240W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
