Instruction/ maintenance manual of the product RT-ID 75 Einhell
Go to page of 12
Operating Instructions Hammer Drill Art.-Nr .: 42.597.46 I.-Nr .: 11010 RT -ID 75 Anleitung_RT_ID_75_SPK1:_ 05.02.2009 16:06 Uhr Seite 1.
2 To avoid damaging the gearbox, the drill / hammer drill selector switch should only be moved when the machine is at a standstill Anleitung_RT_ID_75_SPK1:_ 05.
1 2 2 3 1 9 10 6 8 7 5 4 1 3 8 8 Anleitung_RT_ID_75_SPK1:_ 05.02.2009 16:06 Uhr Seite 3 3.
4 4 5 6 7 8 8 A A 2 B 8 B 10 8 9 9 8 9 10 8 9 10 Anleitung_RT_ID_75_SPK1:_ 05.02.2009 16:06 Uhr Seite 4.
10 11 12 7 6 4 5 3 A B 1 Anleitung_RT_ID_75_SPK1:_ 05.02.2009 16:06 Uhr Seite 5 5.
6 GB “Caution - Read the operating instructions to reduce the risk of inquiry” Wear ear-muffs. The impact of noise can cause damage to hearing. Ꮯ Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials.
GB Important! When using equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating manual with due care. Keep this manual in a safe place, so that the information is available at all times.
8 GB Important! The vibration value changes according to the area of application of the electric tool and may exceed the specified value in exceptional circumstances. 5. Before starting the equipment Before you connect the equipment to the mains supply make sure that the data on the rating plate are identical to the mains data.
GB 6. Operation 6.1 ON/OFF switch (Fig. 11/Item 5) First fit a suitable drill bit into the tool (see 5.4). Connect the mains plug to a suitable socket. Position the drill in the position you wish to drill. To switch on: Press the ON/OFF switch (5) Continuous operation: Secure the ON/OFF switch (5) with the locking button (4).
Press the drill bit and machine gently against the mark whilst the ON/OFF switch (5) is still set to off. Then drill the hole. See the instructions in point 6.7 for more details. The dust extraction system (9) must be cleaned after at least every 15 holes.
GB 9. Disposal and recycling The unit is supplied in packaging to prevent its being damaged in transit. This packaging is raw material and can therefore be reused or can be returned to the raw material system. The unit and its accessories are made of various types of material, such as metal and plastic.
GUARANTEE CERTIFICATE Dear Customer, All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your device develops a fault, please contact our service department at the address shown on this guarantee card.
An important point after buying a device Einhell RT-ID 75 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Einhell RT-ID 75 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Einhell RT-ID 75 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Einhell RT-ID 75 you will learn all the available features of the product, as well as information on its operation. The information that you get Einhell RT-ID 75 will certainly help you make a decision on the purchase.
If you already are a holder of Einhell RT-ID 75, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Einhell RT-ID 75.
However, one of the most important roles played by the user manual is to help in solving problems with Einhell RT-ID 75. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Einhell RT-ID 75 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
