Instruction/ maintenance manual of the product RT-CD 18/1 Li Einhell
Go to page of 12
Original operating instructions Cordless drill/screwdriver Art.-Nr.: 45.132.67 I.-Nr.: 11010 RT-CD 18/1-2B Li Anleitung_RT_CD_18_1_Li_SPK7:_ 19.08.
1 9 1 7 11 6 8 5 2 3 3 5 5 2 10 4 6 8 2 Anleitung_RT_CD_18_1_Li_SPK7:_ 19.08.2010 10:58 Uhr Seite 3.
4 1 5 4 6 8 7 7 11a 11b 1 2 3 a 9 a 10 2 3 Anleitung_RT_CD_18_1_Li_SPK7:_ 19.08.2010 10:58 Uhr Seite 4.
4 GB Change the gear only when the drill is at a standstill. If you fail to observe this point, the gearing may be damaged. Store the battery only in dry rooms with an ambient temperature of +10°C to +40°C. Place only charged batteries in storage (charged at least 40%).
Important! When using equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating manual with due care. Keep this manual in a safe place, so that the information is available at all times. If you give the equipment to any other person, give them these operating instructions as well.
GB 6 Sound and vibration Sound and vibration values were measured in accordance with EN 60745. L pA sound pressure level 68.9 dB(A) K pA B d 3 y t n i a t r e c n u L WA sound power level 79.9 dB(A) K WA B d 3 y t n i a t r e c n u Wear ear-muffs. The impact of noise can cause damage to hearing.
GB 7 the red LED flashes after the battery has been inserted, the battery is defective. In this case, pull out the mains plug of the charger immediately and remove the defective battery.
GB 8 possible into the chuck opening (a). Tighten the chuck (9) and then check that the tool is secure. 6.10 Screwdriving We recommend using self-centering screws (e.g. Torx screws, recessed head screws) designed for reliable working. Be sure to use a bit that matches the screw in shape and size.
GUARANTEE CERTIFICATE Dear Customer, All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your device develops a fault, please contact our service department at the address shown on this guarantee card.
EH 06/2010 (01).
EH 06/2010 (01).
EH 06/2010 (01).
An important point after buying a device Einhell RT-CD 18/1 Li (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Einhell RT-CD 18/1 Li yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Einhell RT-CD 18/1 Li - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Einhell RT-CD 18/1 Li you will learn all the available features of the product, as well as information on its operation. The information that you get Einhell RT-CD 18/1 Li will certainly help you make a decision on the purchase.
If you already are a holder of Einhell RT-CD 18/1 Li, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Einhell RT-CD 18/1 Li.
However, one of the most important roles played by the user manual is to help in solving problems with Einhell RT-CD 18/1 Li. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Einhell RT-CD 18/1 Li along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
