Instruction/ maintenance manual of the product XGA "Diamond" Series LC-XD25 Eiki
Go to page of 75
Multimedia Pr ojector Owner's Man ual LC-XD25 MODEL.
2 Features and Design This Multimedia Projector is designed with the most adv anced technology f or por tability , durability , and ease of use. This projector utilizes b uilt-in multimedia f eatures, a palette of 16.77 million colors, and matrix liquid cr ystal displa y (LCD) technology .
3 T able of Contents T rademarks Each name of corporations or products in this book is either a registered trademark or a tr ademark of its respectiv e cor poration. Features and Design . . . . . . . . . . . . . 2 T able of Contents . . . . . . . . . .
4 T o the Owner Bef ore operating this projector, read this manual thoroughly and operate the projector properly . This projector provides many conv enient features and functions. Operating the projector proper ly enables you to manage those f eatures and maintains it in better condition f or a considerab le time.
5 Safety Instructions All the safety and operating instructions should be read bef ore the product is operated. Read all of the instructions given here and retain them f or later use. Unplug this projector from AC power supply bef ore cleaning. Do not use liquid or aerosol cleaners.
6 CA UTION Choose the r unning speed of cooling fans in the fan control setting according to the altitude in which the projector is being used (p.55). Failure to do so may aect the projector life.
7 Compliance Federal Communications Commission Notice Note: This equipment has been tested and f ound to comply with the limits f or a Class B digital device, pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonable protection against har mful interference in a residential installation.
8 P ar t Names and Functions q t y e r w Fr ont Bottom q Speaker w Infrared Remote Receiver e Focus Lever r Lens t Zoom Lever y Lens Cover (See page 58 f or attaching.) CA UTION Do not turn on a projector with lens cover attached. High temperature from light beam ma y damage lens cov er and result in fire hazard.
9 P ar t Names and Functions Rear T erminal e COMPUTER IN 2 / MONIT OR OUT This ter minal is switchab le and can be used f or input from a computer or output the incoming R G B a n a l o g s i g n a l f r o m C O M P U T E R I N 1 /S-VIDEO IN / COMPONENT IN ter minal to the other monitor .
10 T op Contr ol y LAMP REPLA CE indicator T ur n yellow when the life of the projection lamp dra ws to an end. (p .60, 69) t W ARNING indicator Emit a red light when the projector detects an abnor mal condition. This also blinks red when the inter nal temperature of the projector e xceeds the operating range.
11 P ar t Names and Functions P ar t Names and Functions Remote Contr ol q PO WER ON/ST AND-BY button T ur n the projector on or off. (p .18, 20) w VIDEO button Select VIDEO input source. (p .24, 37) e COMPUTER button Select COMPUTER input source. (p .
12 P ar t Names and Functions T o ensure safe operation, please observe the f ollowing precautions: ● Use two (2) AA or LR6 type alkaline batteries. ● Alwa ys replace batteries in sets. ● Do not use a ne w batter y with a used batter y . ● A void contact with w ater or liquid.
13 Installation ✔ Notes: • The brightness in the room has a great influence on picture quality . It is recommended to limit ambient lighting in order to obtain the best image. • The values shown belo w are approximate and ma y vary from the actual sizes.
14 T o the A C outlet. (200 - 240 V A C) Installation This projector uses nominal input v oltages of 100-120 V or 200-240 V A C. This projector automatically selects the correct input v oltage. It is designed to work with single-phase pow er systems having a grounded neutral conductor .
15 Installation Connecting to a Computer Cables used f or connection • V GA Cables (Mini D-sub 15 pin) (Only one cab le is supplied.) • A udio Cables (Mini Plug: stereo) ( Not all the cables are supplied with this projector .
16 Installation Connecting to Video Equipment Cables used f or connection • Video and A udio Cable (RCA x 3) • S-VIDEO Cable • S-VIDEO-V GA Cable • A udio Cable (RCA x 2, Mini Plug: stereo) (Not all the cables are supplied with this projector .
17 Installation Connecting to Component Video and RGB (Scart) Equipment Cables used f or connection • A udio Cables (Mini Plug :stereo) • Scar t-V GA Cable • Component Cable • Component-V GA Cable (Not all the cables are supplied with this projector .
18 Basic Operation C o n n e c t t h e p r o j e c t o r ’s AC p ow e r c o r d i n t o a n A C outlet. The PO WER indicator becomes red. Open the lens cov er . Press the POWER ON/ST AND-BY button on the top control or on the remote control. The POWER indicator becomes green and the cooling fans star t to operate.
19 T o Enter a PIN code Select a number by pressing the P oint ed buttons, an d then press the P oint 8 button to fix the number and mov e the pointer .
20 Basic Operation Press the POWER ON/ST AND-BY button on the top control or on the remote control, and a message "P ow er off?" appears on the screen. Press the POWER ON/ST AND-BY button again to tur n off the projector .The POWER indicator star ts to blink red, and the cooling fans keep r unning.
21 Basic Operation How to Operate the On-Screen Men u The projector can be adjusted or set via the On-Screen Menu. Refer to the f ollowing pages regarding each adjustment and setting procedures. Press the P oint 7 8 buttons to select a Menu icon to adjust and press the P oint ed buttons to select an item to adjust.
22 Basic Operation Menu Bar PC System Menu Used to select c o mp u t e r s y s t e m . (p .27) Setting Menu U s e d t o s e t t h e projector's operating configurations. (p .45-56) Image Select Menu Used to select an image lev el among Dynamic, Standard, Real, Blackboard (Green), Colorboard and Image 1 ~ 4.
23 Basic Operation Rotate the Zoom Le ver to zoom in and out. Rotate the F ocus Lev er to adjust the projected picture f ocus. Zoom and Focus Adjustment Zoom Le ver (Rear) F ocus Le ver (F ront) If a .
24 Basic Operation Press the V OLUME+/– buttons on the top control or on the remote control to adjust the v olume. The volume dialog bo x appears on the screen for a f ew seconds . Press the MUTE button on the remote control to temporarily tur n off the sound.
25 Basic Operation blac k out ➜ the captured image ➜ nor mal ➜ • • • • • Press the NO SHOW button on the remote control to black out the image. T o restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as "User" in the Logo selection (p .
26 Computer Input Choose either RGB or Computer 2 by pressing the COMPUTER button on the remote control. Before using COMPUTER button, correct input source should be selected through Menu operation as described below . Input Sour ce Selection Direct Operation RGB COMPUTER button ✳ See Notes at the bottom of this page.
27 Computer Input Computer System Selection This projector automatically tunes to v ar ious types of computers based on V GA, SV GA, XGA, SXGA, WXGA, or UXGA with its Multi-scan system and A uto PC Adjustment.
28 Computer Input A uto PC Adjustment function is provided to automatically adjust Fine sync, T otal dots, Hor izontal, and V er tical to conf or m to your computer .
29 Computer Input Press the MENU button to display the On-Screen Menu. Press the P oint 7 8 buttons to move the red framed pointer to the PC Adjust Menu icon. Press the P oint e d butt ons to mov e the red frame d pointer to the item that you w ant to adjust and then press the SELECT button to display the adjustment dialog box.
30 Computer Input Adjust the hor izontal area display ed by this projector . Press the P oint 7 8 buttons to decrease/increase the v alue. Display area H Adjust the ver tical area display ed by this projector . Press the P oint 7 8 buttons to decrease/increase the v alue.
31 Computer Input Select an image lev el among Dynamic, Standard, Real, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3, and Image 4 by pressing the IMAGE button on the remote control. Nor mal picture le vel preset on this projector . Picture le vel with improv ed halftone f or graphics .
32 User preset image in the Image Adjust Menu. (p .34) Image 1 ~ 4 M o v e t h e r e d f r a m e d pointer to the lev el and press the SELECT button. The le vel being selected. Image Select Menu Image Select Menu icon Computer Input Colorboard Press the MENU button to display the On-Screen Menu.
33 Computer Input Computer Input Press the MENU button to display the On-Screen Menu. Press the P oint 7 8 b uttons to mo ve the red framed pointer to the Image Adjust Menu icon. Press the P oint ed buttons to mov e the re d frame d pointer to the item that y ou want to adjust, and then press the SELECT button.
34 Computer Input Store Exit the Image Adjust Menu. Quit T o store the adjusted data, select Store and press the SELECT b utton. Select a le v el from Image 1 to 4 with the P oi nt ed buttons and press the SELECT button. A confir mation bo x appears and then select [Y es].
35 Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displa yed on the screen f or a fe w seconds and then the Aspect dialog bo x appears. Scale H/V ...............
36 Computer Input When the Digital zoom + is selected, the On-Screen Menu disappears and the message "D . zoom +" is display ed. Press the SELECT button to e xpand the image size. And press the P oint ed 7 8 buttons to pan the image . The P anning function can work only when the image is larger than the screen size .
37 Computer Input Video Input Choose Video by pressing the VIDEO button on the remote control. Input Sour ce Selection (Video) Direct Operation Video Remote Control VIDEO button Press the MENU button to display the On-Screen Menu. Press the P oint 7 8 butt o ns to move t he re d framed pointer to the Input Menu icon.
38 Video Input COMPUTER button ✳ See Notes at the bottom of this page. Remote Control COMPUTER button Computer 2 ✳ S-video Choose S-video , Component or RGB(Scar t) by pressing the COMPUTER button on the remote control. Bef ore using COMPUTER button, correct input source should be selected through Menu operation as described below .
39 Video Input Video Input Press the MENU button to display the On-Screen Menu. Press the P oint 7 8 b uttons to mo ve the red framed pointer to the A V System Menu icon. Video System Selection Press the P oint e d b ut t o n s to mo ve t h e re d a rr o w pointer to the system that y ou want to select and then press the SELECT button.
40 Video Input Select an image lev el among Dynamic, Standard, Cinema, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3, and Image 4 by pressing the IMAGE button on the remote control. Nor mal picture le vel preset on this projector . Picture le vel adjusted f or the picture with fine tone.
41 Video Input User preset image in the Image Adjust Menu. (p .43) Image 1 ~ 4 M o v e t h e r e d f r a m e d pointer to the lev el and press the SELECT button. The le vel being selected. Image Select Menu Image Select Menu icon Colorboard Press the MENU button to display the On-Screen Menu.
42 Video Input Press the MENU button to display the On-Screen Menu. Press the P oint 7 8 buttons to move the red framed pointer to the Image Adjust Menu icon. Press the P oint e d butt ons to mov e the red frame d pointer to the item that y ou want to adjust, and then press the SELECT b utton.
43 Video Input Video Input T o reset the adjusted data, select Reset and press the SELECT button. The confir mation box appears and then select [Y es]. All adjustments returns to their previous figures. Reset Press the P oint 7 8 b uttons to obtain better balance of contrast.
44 Video Input This projector has the picture screen resize function, which enab les you to customize the image siz e. Press the MENU button to display the On-Screen Menu. Press the P oint 7 8 buttons to move the red framed pointer to the Screen Menu icon.
45 Setting Press the MENU button to display the On-Screen Menu. Press the P oint 7 8 b uttons to mo ve the red framed pointer to the Setting Menu icon.
46 A uto setup S e l e c t A u t o s e t u p and this box appears. Choose the desired setting f or Input search, A uto keystone and Auto PC adj. with the Point 7 8 buttons . This function enables Input search, Auto K eystone correction and A uto PC adjustment by pressing the A UTO SETUP button on the top control.
47 Blue back Press the P oint 7 8 buttons to switch On/Off. When this function is "On", a blue image is display ed while the input signal is not detected. Ke ystone This function corrects distor tion of a projected image. Select either Store or Reset with the P oint 7 8 butto ns, and then press the SELECT button.
48 Setting Logo select This function decides the star t-up display as f ollows: User . . . . the image you captured Def ault . . the factory-set logo Off . . . . . countdown only Logo (Logo and Logo PIN code lock settings) This function allows you to customize the screen logo with Logo select, Capture, and Logo PIN code loc k functions.
49 Setting This function prev ents an unauthor ized person from changing the screen logo . Off . . . . . . the screen logo can be changed freely from the Logo select menu. (p .48) On . . . . . . the screen logo cannot be changed without the Logo PIN code.
50 Setting Ceiling When this function is "On", the picture is top/bottom and left/right re v ersed. This function is used to project the image from a ceiling mounting the projector . Rear When this function is "On", the picture is left/right re versed.
51 Setting P ower management F or reducing power consumption as well as maintaining the lamp life , the P ower management function tur ns off the projection lamp when the projector is not used for a cer tain period.
52 Setting Remote control This projector provides two diff erent remote control codes: th e fac t o r y - s et i ni t i a l c o d e ( C o de 1 ) a n d th e s e c o nd a r y code (Code 2). This s witching function prev ents remote control interference when operating se veral projectors or video equipment at the same time.
53 Setting Ke y lock Security (Ke y lock and PIN code lock settings) This function allows y ou to use K ey lock and PIN code loc k function to set the security for the projector oper ation. This function loc ks operation of the top control or the remote control.
54 Setting T o Enter the PIN code Select a number by pressing the P oint e d butt ons. And then press the P oint 8 button to fix the number and move the pointer .
55 Setting This function provides the f ollowing alter nativ es in the cooling f ans' operation after tur ning off the projector . (p.20) L1 . . . . . . nor mal operation L2 . . . . . . s l o w e r a n d l o w e r - s o u n d t h a n t h e n o r m a l operation (L1), but it takes longer to cool the projector down.
56 This function is used to reset the lamp replacement counter . When replacing the projection lamp , reset the lamp replacement counter by using this function.
57 Maintenance and Cleaning The W ARNING indicator shows the state of the function which protects the projector . Check the state of the W ARNING indicator and the PO WER indicator to take proper maintenance. W arning indicator The projector is shut down and the W ARNING indicator is blinking red.
58 Maintenance and Cleaning T ur n off the projector , and disconnect the AC po wer cord from the A C outlet. Remov e the air filter by pulling the latch horizontally . Air filter pre v ent dust from accumulating on the optical elements inside the projector .
59 Maintenance and Cleaning Maintenance and Cleaning Cleaning the Pr ojector Cabinet Softly wipe the projector body with a soft, dr y cleaning cloth. When it is heavily soiled, use a small amount of mild detergent and finish with a soft, dr y cleaning cloth.
60 Maintenance and Cleaning When the lif e of the projection lamp of this projector draws to an end, the LAMP REPLA CE indicator emits a y ellow light. If this indicator lights yellow , replace the lamp with a new one promptly . Lamp Replacement T op Control This indicator is yellow w h e n t h e l i f e o f t h e projection lamp draws to an end.
61 F ollow these steps to replace the lamp . T ur n off the projector and disconnect the AC power cord. Allow the projector to cool for at least 45 minutes . Loosen 3 screws of the lamp with a screwdriver and pull out the lamp upwards ver tically by g rasping the handles.
62 Maintenance and Cleaning Be sure to reset the Lamp replacement counter after the lamp is replaced. When the Lamp replacement counter is reset, the LAMP REPLA CE indicator stops lighting. T ur n the projector on, press the MENU button to displa y the On-Screen Menu.
63 Maintenance and Cleaning Appendix T r oubleshooting Bef ore calling your dealer or ser vice center f or assistance, check the items belo w once again. – M a k e s u r e y o u h a v e p r o p e r l y c o n n e c t e d t h e p r o j e c t o r t o p e r i p h e r a l e q u i p m e n t a s d e s c r i b e d o n pages15-17.
64 Image is Left/Right rever sed Image is T op/Bottom reversed – Check the Ceiling/Rear function. (See page 50) – Check the Ceiling function. (See page 50) No sound – Check audio cab le connections from the audio input source. – Adjust the audio source.
65 Appendix The Remote Control does not work. – Check the batteries. – Make sure there is no obstr uction between the projector and remote control. – Mak e sure y ou are not too f ar from the projector when using the remote control. Maximum operating range is 16.
66 Appendix Menu T ree System (1) Mode 1 Mode 2 SV GA 1 - - - - Computer Input ✽ Systems display ed in the System Menu vary depending the input signal.
67 Appendix Image Adjust Contrast Brightness Color temp . Red Green Blue Gamma Store Quit 0 - 63 0 - 63 High 0 - 63 0 - 63 0 - 63 0 - 15 Image 1 Image 2 Image 3 Image 4 Quit Mid Reset Y es/No Low XLow Adj.
68 Appendix Normal Wide Screen Setting Setting Store/Reset On/Off On/Countdown off/Off K eystone Blue back Display Ceiling Rear P ower management On star t Capture Ready Shut down Hour(s) Security Timer (1-30 Min.
69 Appendix Check the indicators f or projector condition. Indicators and Pr ojector Condition The projector is off . (The AC po wer cord is unplugged.) The projector is prepar ing for stand-by or the projection lamp is being cooled down. The projector cannot be tur ned on until cooling is completed.
70 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V , H-F requency below mentioned and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. MAC LC13 640 x 480 34.
71 Appendix Appendix T echnical Specifications Mechanical Inf ormation Projector T ype Multi-media Projector Dimensions (W x H x D) 264 mm x 55 mm x 188 mm (Not including protrusion) Net Weight 3.53lbs (1.6 kg) F oot Adjustment 0˚ to 10.0˚ P anel Resolution LCD P anel System 0.
72 Appendix Accessories Owner's Manual (CD-ROM) Quick Ref erence Guide AC P ower Cord Remote Control and Batter ies VGA Cab le Lens Cover with String PIN Code Label Carr y bag Ferrite Core ● The specifications are subject to change without notice.
73 Appendix T erminal: Mini DIN 8-PIN 1 2 3 4 5 8 7 6 SER VICE PORT CONNECT OR COMPUTER INPUT/COMPONENT INPUT/MONIT OR OUTPUT TERMINAL (ANALOG) T erminal : Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configurations of T erminals Red (R/Cr/S-C) Input/R Output Ground (Horiz.
74 Appendix Write down the PIN code number in the column below and keep it with this manual securely . If you forgot or lost the number and unab le to operate the projector , contact the ser vice station. PIN Code Number Memo F actor y def ault set No: 1 2 3 4* * Should the four-digit number be changed, the factory set number will be inv alid.
KT7BC U.S.A. EIKI In terna tio nal, In c. 30251 E sp eranza Ranch o Sa nta Ma rga rita CA 92 688-2 132 U.S.A. Tel : 800- 242- 345 4 ( 949)- 457-0 20 0 Fax : 800-45 7-3 454 ( 94 9)-4 57-7 878 E-Ma il : usa@ eik i.
An important point after buying a device Eiki XGA "Diamond" Series LC-XD25 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eiki XGA "Diamond" Series LC-XD25 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eiki XGA "Diamond" Series LC-XD25 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eiki XGA "Diamond" Series LC-XD25 you will learn all the available features of the product, as well as information on its operation. The information that you get Eiki XGA "Diamond" Series LC-XD25 will certainly help you make a decision on the purchase.
If you already are a holder of Eiki XGA "Diamond" Series LC-XD25, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eiki XGA "Diamond" Series LC-XD25.
However, one of the most important roles played by the user manual is to help in solving problems with Eiki XGA "Diamond" Series LC-XD25. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eiki XGA "Diamond" Series LC-XD25 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
