Instruction/ maintenance manual of the product Smoke Resistant Box AH-69601 Eiki
Go to page of 14
MODEL AH-69601 Smoke Resistant Box OWNER’S MANUAL.
Before operating this Projector, read this manual thoroughly and operate the projector properly. Provide appropriate space on the top, sides and rear of the Projector and Smoke Resistant Box for allowing air circulation and cooling the Projector. Minimum clearance must be maintained.
• The Smoke Resistant Box protects the projector from dust and cigarette smoke by adopting a highly efficient filter. • Provide two powerful silent rotary fans, and cool down the Projector efficiently.
4 PA RT NAMES PA RT NAMES MOUNTING SCREWS (pro vided on each corner) (Screws are pr o vided in the holes) INDICA T ORS CONNECT OR FIL TER FIL TER CO VER (AIR INT AKE VENTS) REAR FRONT.
Please ensure that there is sufficient clearance around the unit at the time of installation, as shown in the figure on the right. Take out the Smoke Resistant Box from the packaging and place it on a flat surface with the projector. Take off the connector cover from the Projector.
Align the connector of the Projector with the connector pins of the Smoke Resistant Box. Hold the Smoke Resistant Box parallel to the Projector and push it slowly towards the Projector. Hold the Smoke Resistant Box with one hand and use a Phillips-head screwdriver to tighten the four fixed screws to fix the box in place.
When the Projector is turned on, the POWER indicator lights in green. * When the POWER indicator does not light and the WARNING FILTER indicator flashes, the filter is not attached to the Smoke Resistant Box. In this case, the READY indicator on the Projector does not light and the Projector can not be turned on.
Select [SPECIAL] in the Projector's menu. Then select [Filter]. Select [Option box] and then select [Reset] and then [ Yes]. A message [Please wait---] will appear. When this message disappears initial set-up is complete. Close the menu. When replacing the filter, replace with a specified filter.
Open the filter cover and take out the used filter. Install the new filter. Check that the filter is not tilted or warped and then close the filter cover.
The filter operation time can be checked in the projector menu. Open [INFORMATION] in the menu and check [Option filter time] for the hour counter. "Option filter time" menu will not exist when Smoke Resistant Box is not attached on the projector.
IF THE SMOKE RESISTANT BOX IS NOT USED LONG PERIOD OF THE TIME. Remove the Smoke Resistant Box from the Projector and store in safe place. CARE AND CLEANING OF THE CABINET. Remove stains on the cabinet with a soft cloth. If the stain is particularly stubborn, use a cloth soaked in a heavily diluted mild detergent, and finish with a dry cloth.
SMOKE RESIST ANT BO X A CCESSORIE APPENDIX DIMENSIONS SPECIFICA TIONS (461mm) 18.1'' (216mm) 8.5'' (165mm) 6.5'' TOP FRONT RIGHT SIDE ITEM ITEM CONTENTS CONTENTS ITEM CONTENTS TYPE Projector smoke proof and dustproof box DIMENSIONS 6.
.
Printed in Japan © 2004 Eiki International, Inc. A-key to better communications U. S . A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : usa@eiki.
An important point after buying a device Eiki Smoke Resistant Box AH-69601 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eiki Smoke Resistant Box AH-69601 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eiki Smoke Resistant Box AH-69601 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eiki Smoke Resistant Box AH-69601 you will learn all the available features of the product, as well as information on its operation. The information that you get Eiki Smoke Resistant Box AH-69601 will certainly help you make a decision on the purchase.
If you already are a holder of Eiki Smoke Resistant Box AH-69601, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eiki Smoke Resistant Box AH-69601.
However, one of the most important roles played by the user manual is to help in solving problems with Eiki Smoke Resistant Box AH-69601. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eiki Smoke Resistant Box AH-69601 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
