Instruction/ maintenance manual of the product LC-HDT10 Eiki
Go to page of 52
✽ Projection lens is optional. MUL TIMEDIA PR OJECT OR MODEL LC-HDT10 O WNER'S INSTR UCTION MANU AL.
2 C AU TI ON : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
4 COMPLIANCES The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. A C P ower Cord f or the United States and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).
5 T ABLE OF CONTENTS TRADEMARKS ● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc. ● IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. ● Windows and PowerPoint are registered trademarks of Microsoft Corporation.
6 FEA TURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
7 PREP ARA TION NAME OF EA CH P ART OF PR OJECT OR BO TT OM OF CABINET B ACK OF CABINET HOT AIR EXHAUSTED ! Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken. ● Do not put a flammable object near this vent.
8 PREP ARA TION SETTING-UP PR OJECT OR This projector uses nominal input voltages of 120 V or 200-240 V AC. This projector automatically selects correct input voltage. It is designed to work with single- phase power systems having a grounded neutral conductor.
9 PREP ARA TION POSITIONING PR OJECT OR Before setting up a projector, install Projection Lens on a Projector. 1. Before installation, check where a projector is used and prepare suitable lens. For specifications of Projection Lens, refer to manual separately attached or contact sales dealer where you purchased a projector.
10 PREP ARA TION PICTURE LEVEL AND TIL T ADJUSTMENT Picture tilt and projection angle can be adjusted with handles on both sides of a projector. Projection angle can be adjusted to 5.
11 CONNECTING PR OJECT OR TERMINALS OF PR OJECT OR This projector applies various input/output terminals and 4 terminal slots for expansion to tune to diversity of signals from computers and video equipment. 4-built-in Terminal Slots enable you to arrange desired combinations of input sources just by changing Terminal Boards.
12 CONNECTING PR OJECT OR INPUT 1 INPUT 2 INPUT 3 DVI AUDIO CONTROL PORT CONTROL PORT AUDIO R/Pr G/Y B/Pb H/HV V (MONO) (MONO) R L R L (MONO) A UDIO OUT R L R/C JA CK USB SERIAL PORT IN SERIAL PORT OUT RESET INPUT 4 SDI IN1 SDI IN2 SDI OUT Connect audio output from computer or video equipment to these jacks.
13 CONNECTING PR OJECT OR Connect an external audio amplifier to these jacks. (Refer to P14, 15.) AUDIO OUTPUT JACKS This projector uses a micro processor to control unit. Occasionally, micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart unit.
INPUT 1 INPUT 2 INPUT 3 DVI AUDIO CONTROL PORT CONTROL PORT AUDIO R/Pr G/Y B/Pb H/HV V (MONO) (MONO) R L R L (MONO) AUDIO OUT R L R/C JACK USB SERIAL PORT IN SERIAL PORT OUT RESET INPUT 4 SDI IN1 SDI .
15 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQUIPMENT INPUT 1 INPUT 2 INPUT 3 CONTROL PORT CONTROL PORT AUDIO R/Pr G/Y B/Pb H/HV V (MONO) R L (MONO) AUDIO OUT R L R/C JA CK USB SERIAL PORT IN SERIA.
16 IMAGE button Selects image levels. (P32) BEFORE OPERA TION MENU A UTO PC ADJUST IMA GE SELECT V OLUME ZOOM FOCUS LENS SHIFT ON-OFF INPUT 1/2 INPUT 3/4 SIDE CONTR OLS AND INDICA T ORS Adjust zoom. (P23) INPUT 3/4 button POWER ON–OFF button FOCUS buttons VOLUME buttons Select input source either INPUT 3 or INPUT 4.
17 BEFORE OPERA TION READ Y LAMP LAMP REPLA CE W ARNING TEMP . READY indicator LAMP indicator LAMP REPLACE indicator This indicator lights green when a projector is ready to be turned on. And it flashes green in Power Management mode or internal projector temperature is to high.
18 BEFORE OPERA TION OPERA TION OF REMO TE CONTR OL RESET ▲ ▲ ▲ ▲ FOCUS ZOOM ON-OFF SELECT q w y u !0 e r t o i !2 !3 !4 !6 !7 !8 !5 !9 !1 !9 RESET switch Slide this switch to the "RESET" to initialize the remote control code.
Remote Control Code Number of Times of Pressing IMAGE Button 19 BEFORE OPERA TION To insure safe operation, please observe following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at same time. ● Do not use a new battery with an used battery.
20 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU OPERA TION Display ON-SCREEN MENU Press MENU button to display ON-SCREEN MENU (MENU BAR). A red frame is POINTER. Move POINTER (red frame) to MENU ICON that you want to select by pressing POINT RIGHT / LEFT buttons.
21 BEFORE OPERA TION MENU B AR SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P35-38) GUIDE WINDOW Shows selected item of ON- SCREEN MENU. SYSTEM BOX Used to select computer system or video system. Shows selected system on this box.
22 B ASIC OPERA TION TURNING ON PR OJECT OR TURNING OFF PR OJECT OR TURNING ON / OFF PR OJECT OR Connect a projector's AC Power Cord into a wall outlet and turn MAIN ON/OFF SWITCH to ON. LAMP indicator lights RED, and READY indicator lights GREEN.
23 B ASIC OPERA TION ADJUSTING SCREEN ZOOM ADJUSTMENT FOCUS ADJUSTMENT 1 Press ZOOM ▲ / ▼ button on Side Control or on Remote Control Unit. Message “ Zoom ” is displayed. 2 Press ZOOM ▲ button to make image larger, and press ZOOM ▼ button to make image smaller.
24 B ASIC OPERA TION 1 2 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to SOUND Menu icon. Volume Press VOLUME (+/ – ) button(s) on Side Control or on Remote Control Unit to adjust volume.
25 B ASIC OPERA TION When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from video equipment to R/Pr, G/Y and B/Pb jacks. WHEN SELECT INPUT 2 (5 BNC TERMINAL) WHEN SELECT INPUT 1 (SDI TERMIN.
26 B ASIC OPERA TION SYSTEM SELECT This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA or UXGA (refer to “ COMPATIBLE COMPUTER SPECIFICATION ” on pages 50-51).
27 B ASIC OPERA TION SYSTEM SELECT MENU (SDI) SYSTEM SELECT Menu icon Displays system being selected. Systems on this dialog box can be selected. Custom Mode (1~15) set in DISPLAY ADJUST Menu. (P30, 31) SYSTEM SELECT MENU (Component video) SYSTEM SELECT Menu icon Displays system being selected.
28 DISPLA Y ADJUST DISPLA Y ADJUSTMENTS This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to DISPLAY ADJUST Menu icon.
29 DISPLA Y ADJUST A UT O PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows. Press MENU button and ON-SCREEN MENU will appear.
30 DISPLA Y ADJUST MANU AL DISPLA Y ADJUSTMENTS This projector can automatically tune to display signals from most computers and video equipments currently distributed. However, some computers and video equipments employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system of this projector.
31 DISPLA Y ADJUST Press SELECT button to show information of computer selected. Current mode Adjusts clamp position. When image has a dark bar(s), try this adjustment. Clamp Press SELECT button at Current mode icon to show information of computer connected.
32 IMAGE ADJUST MENU Move a red frame pointer to item to be selected and then press SELECT button. IMAGE ADJUST Menu icon IMA GE ADJUSTMENTS Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE ADJUST Menu icon.
33 DISPLA Y ADJUST Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press POINT UP/DOWN button to move a red frame pointer to item that you want to adjust and then press SELECT button.
34 DISPLA Y ADJUST Reset all adjustment to previous figure. Reset Store Closes IMAGE MENU. Quit Other icons operates as follows. To store manually preset image, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear.
35 SETTING SETTING MENU Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red-frame pointer to SETTING icon. 1 2 Language Press POINT DOWN button to move a red-frame pointer to item that you want to set and then press SELECT button.
36 SETTING Logo When this function is “ On, ” projector displays logo when starting up. Menu position Ceiling When this function is “ On, ” picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounting the projector.
37 SETTING On start When this function is “ On, ” projector is automatically turned on just by connecting AC Power cord to a wall outlet. Note ; B e sure to turn projector off properly (refer to section “ TURNING OFF PROJECTOR ” on P22). If projector is turned off in wrong steps, On Start function does not operate properly.
38 SETTING Lamp counter reset Key lock Factory default Press POINT UP/DOWN button to move a red frame pointer to “ Factory default ” and then press SELECT button. The message "Return to Factory default?" is displayed. Move the pointer to [Yes] and then press SELECT button.
READ Y LAMP LAMP REPLACE W ARNING TEMP . 39 AIR FIL TER CARE AND CLEANING Turn power off, and disconnect AC power cord from AC outlet. 1 2 Air Filter prevents dust from accumulating on surface of Projection Lens and Projection Mirror.
40 LAMP MANA GEMENT This Projector is equipped with 4 Projection Lamps to ensure brighter image and those lamps are controlled by Lamp Management Function. Lamp Management Function detects status of all lamps and shows status on screen or on LAMP REPLACE indicator.
41 APPENDIX Check number of lamp to be replaced on Lamp Status Display. Remove two screws on Lamp Cover and press button to open Lamp Cover. (See right figure.) 1 3 Loosen two screws and pull out Lamp Assembly to be replaced by grasping handle. 4 Turn off a projector and disconnect AC Power Cord.
42 APPENDIX This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. ● Lamp lifetime may differ from lamp to lamp and according to the environment of use.
43 ● Check audio cable connection from audio input source. ● Adjust audio source. ● Press VOLUME (+) button. ● Press MUTE button. TR OUBLESHOO TING Before calling your dealer or service center for assistance, check matters below once again. 1.
44 APPENDIX SER VICE W ARNING: High voltages are used to operate this pr ojector . Do not attempt to open cabinet. You can often correct operating problems yourself. If a projector fails to work properly, see "TROUBLESHOOT- ING" section on pages 43-44.
45 APPENDIX INDICA T ORS AND PR OJECT OR CONDITION Check the Indicators for projector condition. • • • on : red • • • dim • • • off • • • flashing : red ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow.
46 APPENDIX SDI 1 SYSTEM Input 2 Y, Pb/Cb, Pr/Cr SYSTEM 3) 1) Input 1 RGB Input 2) System System SVGA 3 Custom SVGA 1 SVGA 2 Auto PC Adj. Fine sync Total dots Horizontal Vertical Current mode Clamp Di.
47 APPENDIX Lamp 2 Sound Mute Quit Volume Built-in SP. On/Off On/Off 0 - 63 Language Setting English German French Italian Spanish Portuguese Dutch Swedish Chinese Korean Japanese On/Off On/Off On/Off.
48 APPENDIX Owner ’ s Manual AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries Remote Control Cable DVI-VGA Cable and DVI Cable MAC/VGA Adapter 6 Types Light-Block Sheet (For option lens) 2 Types Lens Attachment (For option lens) Protective Dust Cover TECHNICAL SPECIFICA TIONS 1.
49 APPENDIX CONFIGURA TIONS OF TERMINALS DVI-I TERMINAL (DIGITAL/ANALOG) This terminal accepts only Digital (TMDS) or Analog (RGB) output signal. Connect display output terminal of computer to this terminal with DVI cable (supplied). 1 9 17 2 10 18 3 11 19 4 12 20 5 13 21 6 14 22 7 15 23 8 16 24 C1 C2 C3 C5 C4 T.
50 APPENDIX COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept a signal from all computers with V, H-Frequency mentioned below and less than 230 MHz of Dot Clock. –––––––– (Interlace) 1024 x 768 (Interlace) ON-SCREEN DISPLAY RESOLUTION H-Freq.
51 APPENDIX NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) D-VGA 640 x 480 31.47 59.94 D-480p 720 x 480 ( Progressive ) 31.47 59.88 D-575p 768 x 575 ( Progressive ) 31.25 50.00 D-SVGA 800 x 600 37.
Part No. 610 309 1198 (1AA6P1P4213-- M4MB) Printed in Japan © 2003 Eiki International, Inc. A-key to better communications U .S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : usa@eiki.
An important point after buying a device Eiki LC-HDT10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eiki LC-HDT10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eiki LC-HDT10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eiki LC-HDT10 you will learn all the available features of the product, as well as information on its operation. The information that you get Eiki LC-HDT10 will certainly help you make a decision on the purchase.
If you already are a holder of Eiki LC-HDT10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eiki LC-HDT10.
However, one of the most important roles played by the user manual is to help in solving problems with Eiki LC-HDT10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eiki LC-HDT10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
