Instruction/ maintenance manual of the product EIP-3000N Eiki
Go to page of 68
EIP-3000N OWNER’S MANUAL EI KI INDUSTRIAL CO., L TD. EIP-3000N_EN_CD__cover 06.5.11, 10:18 AM 7.
ii IMPOR T ANT • For your assistance in reporting the loss or theft of your Projector , please recor d the Model and Serial Number located on the bottom of the pr ojector and retain this information.
iii EIP-3000N_EN_CD_a 06.5.10, 9:36 AM 3.
iv The supplied CD-ROM contains operation instructions in English, German, French, Spanish, Italian and Portuguese. Carefully read thr ough the operation instructions before operating the projector . Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Spanisch, Italienisch u nd Por tugiesisch.
1 Bef ore using the projector , please read this owner’ s man ual carefully . 1. W ARRANTY This is to assure that you immediately r eceive the full benefit of the parts, service and labor warranty applicable to your purchase.
2 Caution Concerning Lamp Replacement See “Replacing the Lamp” on page 55 . PR ODUCT DISPOSAL This pr ojector utilizes tin-lead solder , and a pressurized lamp containing a small amount of mercury . Disposal of these materials may be regulated due to environmental considerations.
3 40 Using the Menu Screen Menu Selections (Adjustments) Example: Adjusting “Bright”. • This operation can also be performed by using the buttons on the projector . Press B MENU. • The “ Picture ” menu screen for the se- lected input mode is displayed.
4 Contents Preparing Introduction How to Read this Owner ’ s Ma nua l ....... 3 Contents ............................................... 4 IMPORT ANT SAFEGUARDS ............... 6 How to Access the PDF Owner ’ s Man uals ...........................
5 Reference Appendix Maintenance ....................................... 52 Maintenance Indicators ...................... 53 Regarding the Lamp ........................... 55 Lamp ..................................................... 55 Caution Concerning the Lamp .
6 1. Read Instructions All the safety and operating instructions should be read before the pr oduct is operated. 2. Retain Instructions The safety and operating instructions should be r etained for future refer ence. 3. Heed W arnings All warnings on the product and in the operating instructions should be adhered to.
7 15. Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fir e or electric shock.
8 Observe the following safeguards when setting up your projector . Caution concerning the lamp unit ■ P otential hazard of glass par- ticles if lamp ruptures. In case of lamp rupture, contact your nearest EIKI A uthor ized Dealer or Service Center for replacement.
9 ■ When turning off the projector , the cooling fan runs to decrease the inter nal temperature f or a while. Unplug the pow er cord after the cool- ing f an stops. The per iod the cooling fan runs will vary , depending on the circumstances and the internal temperature.
10 PDF owner’ s manuals in se veral languages are included in the CD-R OM. T o utilize these manuals, you need to install Adobe ® Reader ® on your computer (Windo ws ® or Macintosh ® ). Please download Adobe ® Reader ® from the Internet ( http://www .
11 Accessories Remote control T wo R-6 batteries (“AA” size, UM/SUM-3, HP-7 or similar) Power cord* RGB cable (10 ' (3.0 m)) QCNWGA045WJPZ • Quick Guide • Owner’ s manual (this manual and CD-ROM) Optional accessory ■ Lamp unit AH-66271 Supplied accessories For U.
12 33 40 53 32 32 30 31 52 30 15 28, 53 40, 51 29, 53 28, 29 40 T op View ST ANDBY - ON button For turning the power on and putting the projector into standby mode. Lamp indicator T emperature w arning indicator Adjustment buttons ( P / R / O / Q ) For selecting menu items.
13 25 52 31 26 25 25 24 23 24 25 27 21 23 24 27 24 46 52 Numbers in Z ref er to the main pages in this o wner’ s manual where the topic is e xplained.
14 33 40 36 32 36 32 40 51 29 28 40 36 40 32 36 34 Numbers in Z ref er to the main pages in this o wner’ s manual where the topic is e xplained. ST ANDBY button For putting the projector into the standby mode. KEYST ONE b utton For entering the Keystone Corr ection mode.
15 • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • Insert the batteries making sure the polarities corr ectly match the m and n marks inside the battery compartment. • Batteries of different types have dif ferent properties, therefore do not mix batteries of dif ferent types.
16 Quic k Star t This section shows the basic operation (projector connecting with the computer). For details, see the page described below for each step . Setup and Projection In this section, connection of the projector and the computer is explained using one example.
17 4. Adjust the projected image with the Setup Guide Select the “INPUT 1” using the INPUT button on the projector or C INPUT 1 on the remote control.
18 Ceiling-mount Setup ■ It is recommended that you use the optional EIKI ceiling-mount brac ket f or this installation. Before mounting the projector , contact y our nearest EIKI A uthorized Dealer or Service Center to obtain the recommended ceiling- mount brac ket (sold separately).
19 300" 200" 100" 84" 60" 240" 180" 160" 120" 80" 60" 67" 50" 48" 36" 34'3 " – 39' 8 " (10.4 m – 12.1 m) 22'10 " – 26'5 " (7.0 m – 8.
20 Setting up the Pr ojector (Continued) 300 (762 cm) 270 (686 cm) 250 (635 cm) 200 (508 cm) 150 (381 cm) 100 (254 cm) 84 (213 cm) 80 (203 cm) 72 (183 cm) 60 (1.
21 Connections INPUT T er minals and Connectable Main Equipment INPUT 1, 2 ter minal ■ Connecting the computer . (See page 23 .) ■ Connecting video equipment with compo- nent output terminal (DVD player , DTV decoder , DVD recorder with har d disc, etc.
22 Samples of Cab les f or Connection Cables f or a camera or a video game Equipment Input Signal Cable T erminal on the projector ø3.5 mm stereo audio cable (commercially av ailable) RGB cable (supp.
23 Connecting to a Computer T o RGB output ter minal T o audio output terminal RGB Cable * ø3.5 mm stereo or mono audio cable (commercially available) RGB Cable Before connecting, ensure that the power cord of the pr ojector is unplugged fr om the A C outlet and turn off the devices to be connected.
24 Connecting to Video Equipment The projector is equipped with input terminals that suppor t component, S-video, and video signals . See the illustration below to connect with the audio-visual equipment. The image quality is highest in the order of the component signal, the S-video signal and the video signal.
25 L R T o video output terminal When using a composite video cable (INPUT4) T o audio output terminal Note Composite video cable (commercially available) RCA audio cable (com- mercially available) T .
26 Contr olling the Pr ojector by a Computer When the RS-232C terminal on the projector is connected to a computer with a DIN-D-sub RS- 232C adaptor and an RS-232C serial control cable (cross type, commercially a v ailable), the com- puter can be used to control the projector and chec k the status of the projector .
27 Connecting the P ower Cor d Plug the supplied power cor d into the A C socket on the rear of the pr ojector . Then plug into A C outlet. AC socket Power cord Supplied accessory When connecting to the LAN terminal using a LAN cable TX/RX LED (yellow) Illuminates when transmit- ting/receiving data.
28 T urning the Pr ojector On/Off Remove the lens cap and press o ST ANDBY-ON on the projector or f ON on the remote control. • When System Lock is set, the keycode input box appears. T o cancel the keycode setting, input the keycode that you have already set.
29 On-screen Display (confirmation message) T urning the Power off (Put- ting the Projector into Standby Mode) • Do not unplug the power cord during pr ojec- tion or cooling fan operation. This can cause damage due to rise in internal temperature, as the cooling fan also stops.
30 About the Setup Guide After tur ning on the projector , the Setup Guide screen appears to assist you with projector setup. Press p ENTER to e xit the Setup Guide screen. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM ST ANDBY -ON button ENTER button 1 Adjusting the Focus Y ou can adjust the f ocus with the f ocus ring on the projector .
31 3 Adjusting the Height The height of the projector can be ad- justed using the adjustment feet at the front and rear of the projector . When the screen is abov e the projec- tor , the projection image can be made higher by adjusting the projector .
32 Image Pr ojection (Continued) Displaying the Black Scr een and T urning off the Sound T emporarily Adjusting the V olume Switching the Input Mode Press C INPUT 1, C INPUT 2, D INPUT 3 or E INPUT 4 on the remote control to select the input mode.
33 0 Keystone ADJ. END Correcting T rapezoidal Distortion When the image is projected either fr om the top or from the bottom to wards the screen at an angle, the ima g e becomes distorted trapezoidally . The function f or correcting trapezoidal distortion is called Keystone Correction.
34 Image Pr ojection (Continued) Resize Mode This function allows you to modify or customize the resize mode to enhance the input image. De- pending on the input signal, you can choose “NORMAL”, “BORDER” or “STRETCH” image. Press H RESIZE.
35 VIDEO •“ STRETCH ” is fix ed when 540P , 720P or 1080 I signals are entered. : Cutout area on which images cannot be pr ojected. : Area on which the image is not included in the original signals.
36 Auto Sync (Auto Sync Adjustment) Operating with the Remote Contr ol Freezing a Moving Image • When the optimum image cannot be achieved with Auto Sync adjustment, use the help menu for manual adjustments. (See page 51 .) Auto Sync function w orks when detect- ing input signal after the projector turns on.
37 The follo wing shows the items that can be set in the projector . Menu Items “Screen adjustment (SCR-ADJ)” menu INPUT 1 (Component)/INPUT 2 (Component)/INPUT 3/INPUT 4 INPUT 1 (RGB)/INPUT2 (RGB) “Picture” menu Picture SCR PRJ Net.
38 “ Projector adjustment (PRJ-ADJ) ” menu Pict. Auto Search SCR PRJ - ADJ Net. Auto Sync Auto Power Off System Sound System Lock h On On On On SEL.
39 Pict. There is no picture or audio SCR Net. PRJ Help Vertical stripes or flickering image appear Data image is not centered Color is faded or poor Picture is dark The image is distorted Reset all adjustments to default settings SEL.
40 Using the Menu Screen Menu Selections (Adjustments) Example: Adjusting “ Bright ” . • This operation can also be perfor med by using the buttons on the projector . Press B MENU. • The “Picture” menu screen for the se- lected input mode is displayed.
41 Press P or R and select “ Bright ” to adjust. • The selected item is highlighted. • Press h ENTER again to return to the previous screen. Press O or Q to adjust the item selected. • The adjustment is stor ed. Press B MENU/HELP . • The menu scr een will disappear .
42 Picture Adjustment (“Picture” menu) Selectable items Standard Presentation Movie Game *sRGB Q Example: “Picture” screen menu f or INPUT 1 (RGB) mode Q Example: “Picture” screen menu f or INPUT 3 mode Picture Mode Contrast 0 0 0 0 K 7500 Bright Red Blue 1 CLR Temp Bright Boost Lamp Setting Standard Bright Reset SEL.
43 4 4 4 4 4 Pr ogressive • In NTSC or P AL60Hz, even if the 3D Progres- sive mode has been set, the three-two pull down enhancement will be enabled automati- cally when the film source has been enter ed. • When the image is blurred or noisy , switch to the optimal mode.
44 Adjusting the Pr ojected Imag e ( “ SCR - ADJ ” menu) Pict. Resize Image Shift 0 0 SCR - ADJ PRJ Net. Keystone Auto Keystone OSD Display Background Setup Guide PRJ Mode Language Front English On Logo On Off Normal SEL.
45 The projector can switch the on-screen displa y language among 11 languages. Selectable items Front Ceiling + Front Rear Ceiling + Rear Description Normal image (Projected from the front of the scr.
46 Adjusting the Pr ojector Function ( “ PRJ - ADJ ” menu) Auto Search Auto Sync Auto Power Off System Sound System Lock h On On On On SEL./ADJ. ENTER END 0 Lamp Timer(Life) 100% Pict.
47 Info This function pre vents unauthorized use of the projector . Once this function is activated, users must enter the correct keycode each time the projector is tur ned on. We sug gest you recor d the keycode in a safe place where only au- thorized users have access.
48 Note Input screen for keycode T o cancel the ke ycode that you hav e already set • Press R on the projector for four times in steps 2 and 3 above. When the System Lock is set • When System Lock is set, the keycode input screen appears after the power is turned on.
49 Setting up the Projector Netw ork En vir onment ( “ Network ” menu) If you do not w ant others to change the setting f or the “ Network ” menu, set a pass word. Select “ P assw ord ” , then press h ENTER or Q . • The screen for entering the passwor d appears.
50 Setting up the Projector Netw ork En vir onment ( “ Network ” menu) (Continued) Menu operation n P age 40 3 3 3 3 3 TCP/IP Setting 4 4 4 4 4 Confirming the Projector Inf ormation Y ou can confir m the MAC address and projector name. Selectable items IP Address Subnet Mask Gateway Description Factory default setting: 192.
51 T r oubleshooting with the “Help” menu Utilizing the “Help” menu func- tions This function advises you to solve the problems during usage. • Y ou can adjust the items with check marks ( ✔ ). • The items in the “Help” menu change, de- pending on the input signal or setting that you have selected.
52 Cleaning the lens ■ Use a commercially available blower or lens cleaning paper (for glasses and camera lenses) for cleaning the lens. Do not use any liquid type cleaning agents, as they may wear off the coating film on the surface of the lens. ■ As the surface of the lens can easily get damaged, be sure not to scrape or hit the lens.
53 Maintenance Indicators About the lamp indicator ■ When the remaining lamp life becomes 5% or less, (yellow) and “Change The Lamp” will be displayed on the screen. When the per centage becomes 0%, it will change to (red), the lamp will automatically turn off and then the projector will automatically enter standby mode.
54 • If the temperature warning indicator illuminates, and the projector enters standby mode, follow the possible solutions above and then wait until the projector has cooled down completely befor e plug- ging in the power cord and turning the power back on.
55 Regar ding the Lamp Lamp ■ It is recommended that the lamp (sold separately) be r eplaced when the remaining lamp life becomes 5% or less, or when you notice a significant deterioration in the pictur e and color quality . The lamp life (percentage) can be checked with the on-scr een display .
56 Regar ding the Lamp (Contin ued) Removing and Installing the Lamp Unit • Make sure that you r emove the lamp unit by the handle. Do not touch the glass surface of the lamp unit or the inside of the projector . • T o avoid injury to yourself and damage to the lamp, be sure to car efully follow the steps below .
57 Remove the lamp unit. • Loosen the securing screws fr om the lamp unit. Hold the lamp unit by the handle and pull it in the direction of the arrow . At this time, keep the lamp unit horizontal and do not tilt it. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp .
58 DTV • When this projector r eceives 640 K 350 VESA format VGA signals, “640 K 400” appears on the screen. • Optimum image quality will be achieved by matching your computer’ s output resolution to the projector’ s native resolution (1024 x 768).
59 T roub leshooting No picture and no sound or projector does not start. Sound is heard but no picture appears (or pictur e is dark). Color is faded or poor . Picture is blurred; noise appears. Picture appears but no sound is heard. An unusual sound is occasionally hear d from the cabinet.
60 Problem Picture is gr een on INPUT 1 (COMPONENT)/ INPUT 2 (COMPONENT). Picture is pink (no green) on INPUT 1 (RGB)/INPUT 2 (RGB). Picture is too bright and whitish. The cooling fan becomes noisy . The lamp does not light up even after the projector turns on.
61 Specifications Projector EIP-3000N NTSC3.58/NTSC4.43/P AL/P AL-M/P AL-N/P AL-60/SECAM/DTV480 I /DTV480P/ DTV540P/DTV576 I /DTV576P/DTV720P/DTV1035 I /DTV1080 I /DTV1080 I -50 Single Chip Digital Micromirror De vice TM (DMD TM ) by T exas Instruments P anel size: 0.
62 Dimensions Units: inches (mm) M4 M4 M4 M4 12 13 / 32 ( 315) 3 1 / 16 ( 77.5) 2 19 / 32 ( 65.5) 1 53 / 64 ( 46.2) 3 5 / 32 ( 80) 1 55 / 64 ( 47) 2 7 / 8 ( 73) 2 61 / 64 ( 75) 1 11 / 32 ( 33.8) 4 19 / 64 ( 109) 4 9 / 64 ( 105) 1 7 / 8 ( 47.5) 4 7 / 64 ( 104) 7 / 16 ( 11) 11 1 / 32 ( 280) 23 / 64 ( 9) 13 / 64 ( 5) 7 / 16 ( 11) EIP-3000N_EN_CD_m 06.
63 3 RCA to 15-pin D-sub cable ........................ 24 AC socket ....................................................... 26 Accessories ................................................... 11 Adjustment buttons .....................................
A-Ke y to better communications U .S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U .S.A. T el : 800-242-3454 (949)-457-0200 F ax : 800-457-3454 (949)-457-7878 E-Mail : usa@eiki.
An important point after buying a device Eiki EIP-3000N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eiki EIP-3000N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eiki EIP-3000N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eiki EIP-3000N you will learn all the available features of the product, as well as information on its operation. The information that you get Eiki EIP-3000N will certainly help you make a decision on the purchase.
If you already are a holder of Eiki EIP-3000N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eiki EIP-3000N.
However, one of the most important roles played by the user manual is to help in solving problems with Eiki EIP-3000N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eiki EIP-3000N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
