Instruction/ maintenance manual of the product Micing AKG Acoustics
Go to page of 12
Micing the Drum Set.
I NTRODUCTION : In the modern studio there is no more complex job for the engineer than micing the drum set. Musically , the drum set and bass form the rhythmic underpinning of any jazz, pop or rock musical performance. In the final mix, it can be in the back- ground, foreground or well out front, depending on the needs of the music.
This, in short, is a description of a typical modern drum set. Figure 1 shows what it looks like from the viewpoint of the audience. In this White Paper we will discuss micing the drum set largely from the point of view of AKG’ s highly regarded studio mics.
In the old days the AKG D12 dynamic was one of the mainstays of kick drum micing; today , the D112 is the modern version of that microphone. With its carefully engineered bass resonance cham- ber the D112 can handle any kick drum with ease. If you want to use a condenser with ultrawide low frequency capability , we suggest the C4000B, with its 0.
directions on the hi-hat and big tom), the sound will “open up” and will seem wider on the repro- duced stereo stage. Details here are shown in Figure 4. By the way , good drummers often know more about drum micing than many engineers think they do -- at least they know what has worked well for them in the past.
If you’re going straight to stereo you will also have to make some processing decisions for the drum tracks. A void any rever- beration; you probably won’ t need it since there is enough overhand in the basic sound itself.
Putting it on T ape: Our microphone count is now up to six, so if you are tracking, lay down one mic per tape track, again, without processing. In your monitor mix, or if you are making a direct-to-st.
The setup, as we have described it, is shown in Figure 8A and B. Do we have to stop here? Obviously not; we can add as many mics as we have remaining tracks. Another useful one to add would be a cardioid looking down on the head of the snare at a distance of about 8 to 10 inches -- but far enough back so as not to both- er the drummer .
9 Figure 8B Global micing in a live studio, plan view:.
The Microphones we Recommend: W e will show you the basic response curves and directional data for the microphones recommended in this White Paper . They have all earned their merits in studios throughout the world. Good drumming and good micing! 10 D550 Frequency Range: 20Hz to 20kHz Polar Pattern: Cardioid Sensitivity: 2.
11 C418 Frequency Range: 50Hz to 20kHz Polar Pattern: hypercardioid Sensitivity: 2.5mV/Pa Equivalent Noise Level: 34dB-A (DIN45412) Electrical Impedance: 200 Ω Recommended load impedance: ≥ 1,000 Ω Maximum SPL for 1% THD: 131dB Power Requirement: 9–52V Size: 3x1.
AKG Acoustics, U.S. • 914 Airpark Center Drive • Nashville • TN 37217 • T el: (615) 620-3800 • Fax: (615) 620-3875 V isit our W eb Site at www .
An important point after buying a device AKG Acoustics Micing (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AKG Acoustics Micing yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AKG Acoustics Micing - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AKG Acoustics Micing you will learn all the available features of the product, as well as information on its operation. The information that you get AKG Acoustics Micing will certainly help you make a decision on the purchase.
If you already are a holder of AKG Acoustics Micing, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AKG Acoustics Micing.
However, one of the most important roles played by the user manual is to help in solving problems with AKG Acoustics Micing. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AKG Acoustics Micing along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
