Instruction/ maintenance manual of the product EI 170 Ei Electronics
Go to page of 3
Instruction Leaflet EI 170/171 Strobe and Vibration Smoke Alarm System, for the deaf and hard of hearing. Introduction This leaflet describes the installation of the EI 170 and EI 171 Systems. Important: Read all instructions before installing. This leaf- let must be left with the end user after installation.
Panel, but the mains transformer remains connected to the supply mains. Vibration Pad Plug the vibration pad into its locking socket on the control panel.
power the system in standby for a week followed by at least 4 minutes alarm. When the mains fails, the green light is extin - guished and the red light flashes rapidly on the control panel to indicate it is on battery power. If the battery is starting to be fully depleted the red light will go off to indicate the control panel is totally unpowered.
An important point after buying a device Ei Electronics EI 170 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ei Electronics EI 170 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ei Electronics EI 170 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ei Electronics EI 170 you will learn all the available features of the product, as well as information on its operation. The information that you get Ei Electronics EI 170 will certainly help you make a decision on the purchase.
If you already are a holder of Ei Electronics EI 170, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ei Electronics EI 170.
However, one of the most important roles played by the user manual is to help in solving problems with Ei Electronics EI 170. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ei Electronics EI 170 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
